Synergy between nanozymes and natural enzymes on the hybrid MoS2 nanosheets/graphite microfiber for enhanced voltammetric determination of hydrogen peroxide

Composite hydrogels with antioxidant and robust adhesive properties for the prevention of radiation-induced dermatitis

Radiotherapy is a pivotal means of cancer treatment, but it often leads to radiation dermatitis, a skin injury caused by radiation-induced excess reactive oxygen species (ROS). Scavenging free radicals in the course of radiation therapy will be an effective means to prevent radiation dermatitis. This study demonstrates a novel double network hydrogel doped with MoS2 nanosheets for the prevention of radiation-induced dermatitis. The resultant SPM hydrogel constructed from polyacrylamide (PAM) and sodium alginate (SA) nanofiber presented favorable mechanical and adhesion properties. It could conform well to the human body's irregular contours without secondary dressing fixation, making it suitable for skin protection applications. The in vitro and in vivo experiments showed that the antioxidant properties conferred by MoS2 nanosheets enable SPM to effectively mitigate excessive ROS and reduce oxidative stress, thereby preventing radiation dermatitis caused by oxidative damage. Biosafety assessments indicated good biocompatibility of the composite hydrogel, suggesting SPM's practicality and potential as an external dressing for skin radiation protection.

Covalently Linking Reduced Graphene Oxide Facilitated Electrodeposition of MoS2 on Silicon Pyramidal Photocathode To Enhance Hydrogen Evolution

In recent years, increasing attention has been paid to photoelectrochemical (PEC) hydrogen production owing to the utilization of sustainable solar energy and its promising performance. Silicon-based composites are generally considered ideal materials for PEC hydrogen production. However, slow reaction kinetics and poor stability are still key factors hindering the development of silicon-based photoelectrocatalysts. Herein, we present an n+-p Si pyramidal photocathode assembly method to load reduced graphene oxide (rGO) onto the surface of the n+-p Si pyramid by covalently linking (Si/rGO). rGO is utilized as a conductive layer to reduce the interfacial charge-transfer resistance. Then, MoS2 can be successfully electrodeposited on the surface of Si/rGO to form the Si/rGO/MoS2 composite, which possesses excellent PEC hydrogen evolution performance with a high and stable photocurrent of -41.6 mA cm-2 and a hydrogen evolution rate of about 18.1 μmol min-1 cm-2 under 0 V (vs RHE). The covalently linking rGO layer effectively enhances the transfer of photogenerated carriers between the Si substrate and MoS2. MoS2 provides abundant hydrogen evolution active sites, which accelerate the surface reaction kinetics, as well as a protective layer for the Si pyramidal array structure. This work provides a low-cost, convenient, and efficient way of preparing silicon-based photocathodes.

A new strategy to build electrochemical enzymatic biosensors using a nanohybrid material based on carbon nanotubes and a rationally designed schiff base containing boronic acid

We report a nanohybrid material obtained by non-covalent functionalization of multi-walled carbon nanotubes (MWCNTs) with the new ligand (((1E,1'E)-(naphthalene-2,3-diylbis(azaneylylidene))bis(methaneylylidenedene)) bis(4-hydroxy-3,1-phenylene))diboronic acid (SB-dBA), rationally designed to mimic some recognition properties of biomolecules like concanavalin A, for the development of electrochemical biosensors based on the use of glycobiomolecules as biorecognition element. We present, as a proof-of-concept, a hydrogen peroxide biosensor obtained by anchoring horseradish peroxidase (HRP) at a glassy carbon electrode (GCE) modified with the nanohybrid prepared by sonication of 2.0 mg mL-1 MWCNTs and 0.50 mg mL-1 SB-dBA in N,N-dimethyl formamide (DMF) for 30 min. The hydrogen peroxide biosensing was performed at -0.050 V in the presence of 5.0 × 10-4 M hydroquinone. The analytical characteristics of the resulting biosensor are the following: linear range between 0.175 μM and 6.12 μM, detection limit of 58 nM, and reproducibility of 2.0 % using the same nanohybrid (6 biosensors), and 9.0 % using three different nanohybrids. The sensor was successfully used to quantify hydrogen peroxide in enriched milk and human blood serum samples and in a commercial disinfector.

Nanozyme-Enhanced Electrochemical Biosensors: Mechanisms and Applications

Nanozymes, as innovative materials, have demonstrated remarkable potential in the field of electrochemical biosensors. This article provides an overview of the mechanisms and extensive practical applications of nanozymes in electrochemical biosensors. First, the definition and characteristics of nanozymes are introduced, emphasizing their significant role in constructing efficient sensors. Subsequently, several common categories of nanozyme materials are delved into, including metal-based, carbon-based, metal-organic framework, and layered double hydroxide nanostructures, discussing their applications in electrochemical biosensors. Regarding their mechanisms, two key roles of nanozymes are particularly focused in electrochemical biosensors: selective enhancement and signal amplification, which crucially support the enhancement of sensor performance. In terms of practical applications, the widespread use of nanozyme-based electrochemical biosensors are showcased in various domains. From detecting biomolecules, pollutants, nucleic acids, proteins, to cells, providing robust means for high-sensitivity detection. Furthermore, insights into the future development of nanozyme-based electrochemical biosensors is provided, encompassing improvements and optimizations of nanozyme materials, innovative sensor design and integration, and the expansion of application fields through interdisciplinary collaboration. In conclusion, this article systematically presents the mechanisms and applications of nanozymes in electrochemical biosensors, offering valuable references and prospects for research and development in this field.

Piezoelectric Effect Modulates Nanozyme Activity: Underlying Mechanism and Practical Application

Nanozyme activity relies on surface electron transfer processes. Notably, the piezoelectric effect plays a vital role in influencing nanozyme activity by generating positive and negative charges on piezoelectric materials' surfaces. This article comprehensively reviews the potential mechanisms and practical applications of regulating nanozyme activity through the piezoelectric effect. The article first elucidates how the piezoelectric effect enables nanozymes to exhibit catalytic activity. It is highlighted that the positive and negative charges produced by this effect directly participate in redox reactions, leading to the conversion of materials from an inactive to an active state. Moreover, the piezoelectric field generated can enhance nanozyme activity by accelerating electron transfer rates or reducing binding energy between nanozymes and substrates. Practical applications of piezoelectric nanozymes are explored in the subsequent section, including water pollutant degradation, bacterial disinfection, biological detection, and tumor therapy, which demonstrate the versatile potentials of the piezoelectric effect in nanozyme applications. The review concludes by emphasizing the need for further research into the catalytic mechanisms of piezoelectric nanozymes, suggesting expanding the scope of catalytic types and exploring new application areas. Furthermore, the promising direction of synergistic catalytic therapy is discussed as an inspiring avenue for future research.

Novel BiVO4-nanosheet-supported MoS2-nanoflake-heterostructure with synergistic enhanced photocatalytic removal of tetracycline under visible light irradiation

This paper describes a simple in-situ hydrothermal technique for the production of BiVO₄/MoS₂ binary nanocomposites as visible-light-driven catalysts. The as-prepared samples were analyzed by structural, morphological, compositional, optical, surface area, and photocurrent analyses. The lattice fringe spaces at 0.304 nm and 0.612 nm were indexed to the (112) and (002) crystal planes of BiVO₄ and MoS₂, respectively. Antibacterial photocatalytic capabilities were assessed using tetracycline (TC). Consequently, it was observed that the BiVO₄/MoS₂ nanocomposite demonstrated improved antibacterial removal ability compared with the pristine samples. The BiVO₄/MoS₂ nanocomposite exhibited 97.46% removal of TC compared with the pure BiVO₄ (43.76%) and MoS₂ (35.28%) samples within 90 min. Thus, the photocatalytic performance was observed to follow the given order: BiVO₄/MoS₂ nanocomposite > BiVO₄ > MoS₂. The removal of TC after 90 min of irradiation was approximately 97.46%, 96.62%, 95.59%, and 94.45% after the 1st, 2nd, 3rd, and 4th cycles, respectively. Thus, the recycling tests revealed the stability of the photocatalyst, which exhibited a TC removal efficiency of 94.45% without distinct decay, even after the 4th cycle. According to the trapping results, hydroxyl radicals and holes were the key species and demonstrated a greater influence on the photocatalytic performance than superoxide radicals. The increased activity of the BiVO₄/MoS₂ nanocomposite may be attributed to its large surface area and tunable bandgap, which accelerate the charge-transport characteristics of the photocatalytic system. This insight and synergetic effects can provide a new approach for the development of novel heterostructure photocatalysts.

Heterojunction of Vertically Arrayed MoS2 Nanosheet/N-Doped Reduced Graphene Oxide Enabling a Nanozyme for Sensitive Biomolecule Monitoring

Enzymes are still indispensable for bio-assaying methods in biomolecule detection by far. The unsatisfied long-term instability, high cost, and susceptibility to the physical environment of natural enzymes are obvious weak points. Here, we developed peroxidase-like heterostructured nanozyme, vertically arraying molybdenum disulfide nanosheets on a substrate layer of nitrogen-doped reduced graphene oxide (MoS₂/N-rGO), with a well-pleasing stability that is characterized by the retained enzymatic activity and maintained structure after 2 years of casual storage at ambient temperatures or 80 cycles of catalytic reaction. The catalytic kinetics of the as-prepared heterostructured nanozyme was superior to some reported nanozymes and even horse radish peroxidase, which was demonstrated due to the defect-rich MoS₂ with Mo and S vacancies and nitrogen-doped rGO experimentally and theoretically. The vertically heterostructured nanozyme exhibited adequate analytical performance in sensitive and quantitative detection of glucose and glutathione (GSH), with a large dynamic sensing range and extremely low limit of detection (0.02 and 0.12 μM (3σ/slope) for glucose and GSH, respectively). We hope this inspired artificial nanozyme will contribute to the future development in sensitive detection of other biomolecules in physiological conditions.

Two-Dimensional Nanostructures for Electrochemical Biosensor

Current advancements in the development of functional nanomaterials and precisely designed nanostructures have created new opportunities for the fabrication of practical biosensors for field analysis. Two-dimensional (2D) and three-dimensional (3D) nanomaterials provide unique hierarchical structures, high surface area, and layered configurations with multiple length scales and porosity, and the possibility to create functionalities for targeted recognition at their surface. Such hierarchical structures offer prospects to tune the characteristics of materials-e.g., the electronic properties, performance, and mechanical flexibility-and they provide additional functions such as structural color, organized morphological features, and the ability to recognize and respond to external stimuli. Combining these unique features of the different types of nanostructures and using them as support for bimolecular assemblies can provide biosensing platforms with targeted recognition and transduction properties, and increased robustness, sensitivity, and selectivity for detection of a variety of analytes that can positively impact many fields. Herein, we first provide an overview of the recently developed 2D nanostructures focusing on the characteristics that are most relevant for the design of practical biosensors. Then, we discuss the integration of these materials with bio-elements such as bacteriophages, antibodies, nucleic acids, enzymes, and proteins, and we provide examples of applications in the environmental, food, and clinical fields. We conclude with a discussion of the manufacturing challenges of these devices and opportunities for the future development and exploration of these nanomaterials to design field-deployable biosensors.

Electrochemical sensor based on the Mn3O4/CeO2 nanocomposite with abundant oxygen vacancies for highly sensitive detection of hydrogen peroxide released from living cells

Based on the strategy of increasing the number of oxygen vacancies to improve the catalytic performance, we have developed a novel electrochemical sensor based on the multivalent metal oxides cerium dioxide and manganous oxide (Mn₃O₄/CeO₂) for reliable determination of extracellular hydrogen peroxide (H₂O₂) released from living cells. The Mn₃O₄/CeO₂ nanocomposite was characterized by high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical performance of the Mn₃O₄/CeO₂ nanocomposite modified glassy carbon electrode (Mn₃O₄/CeO₂/GCE) was investigated. Owing to the abundant oxygen vacancies and strong synergistic effect between the multivalent Ce and Mn, the sensor exhibited excellent catalytic activity and selectivity for the electrochemical detection of H₂O₂ with a low quantitation limit of 2 nM. Moreover, Mn₃O₄/CeO₂/GCE exhibited excellent reproducibility, repeatability, and long-term storage stability. Because of these remarkable analytical advantages, the constructed sensor was able to determine H₂O₂ released from living cells with satisfactory results. The results showed that the Mn₃O₄/CeO₂ sensor is a promising candidate for a nanoenzymatic H₂O₂ sensor with the possibility of applications in physiology and diagnosis.

Defect-Rich Adhesive Molybdenum Disulfide/rGO Vertical Heterostructures with Enhanced Nanozyme Activity for Smart Bacterial Killing Application

Nanomaterials with intrinsic enzyme-like activities, namely "nanozymes," are showing increasing potential as a new type of broad-spectrum antibiotics. However, their feasibility is still far from satisfactory, due to their low catalytic activity, poor bacterial capturing capacity, and complicated material design. Herein, a facile synthesis of a defect-rich adhesive molybdenum disulfide (MoS₂ )/rGO vertical heterostructure (VHS) through a one-step microwave-assisted hydrothermal method is reported. This simple, convenient but effective method for rapid material synthesis enables extremely uniform and well-dispersed MoS₂ /rGO VHS with abundant S and Mo vacancies and rough surface, for a performance approaching the requirements of practical application. It is demonstrated experimentally and theoretically that the as-prepared MoS₂ /rGO VHS possesses defect and irradiation dual-enhanced triple enzyme-like activities (oxidase, peroxidase, and catalase) for promoting free-radical generation, owing to much more active edge sites exposure. Meanwhile, the VHS-achieved rough surface exhibits excellent capacity for bacterial capture, with elevated reactive oxygen species (ROS) destruction through local topological interactions. As a result, optimized efficacy against drug-resistant Gram-negative and Gram-positive bacteria can be explored by such defect-rich adhesive nanozymes, demonstrating a simple but powerful way to engineered nanozymes for alternative antibiotics.

Mo-Based Layered Nanostructures for the Electrochemical Sensing of Biomolecules

Mo-based layered nanostructures are two-dimensional (2D) nanomaterials with outstanding characteristics and very promising electrochemical properties. These materials comprise nanosheets of molybdenum (Mo) oxides (MoO2 and MoO3), dichalcogenides (MoS2, MoSe2, MoTe2), and carbides (MoC2), which find application in electrochemical devices for energy storage and generation. In this feature paper, we present the most relevant characteristics of such Mo-based layered compounds and their use as electrode materials in electrochemical sensors. In particular, the aspects related to synthesis methods, structural and electronic characteristics, and the relevant electrochemical properties, together with applications in the specific field of electrochemical biomolecule sensing, are reviewed. The main features, along with the current status, trends, and potentialities for biomedical sensing applications, are described, highlighting the peculiar properties of Mo-based 2D-nanomaterials in this field.

Bimetallic PtCu nanoparticles supported on molybdenum disulfide-functionalized graphitic carbon nitride for the detection of carcinoembryonic antigen

A molybdenum disulfide based graphite phase carbon nitride (MoS₂/g-C₃N₄) which is supported by a platinum-copper nanoparticle (PtCu) Z-type catalyst was created in this study. The catalyst exploits optoelectronic synergistic effect with large surface area, good catalysis, and biocompatibility to amplify the signal. The electrode impedance of the synthesized MoS₂/g-C₃N₄-PtCu was reduced five times in visible light compared with dark conditions, thereby improving the detection of carcinoembryonic antigen (CEA). At a voltage of - 0.4 V, the immunoprobe constructed with this material is used for CEA detection. A linear relationship between 100 fg mL^-1 and 80 ng mL^-1 concentrations was achieved with a minimum detection limit of 33 fg mL^-1 (S/N = 3). The recovery rate was 103-104%, and the relative standard deviation was 2.9-3.8%. This implies that the sandwich immunosensors have good reproducibility, selectivity, and stability and can be used in various applications. Graphical Abstract.