Paper chip-based colorimetric assay for detection of Salmonella typhimurium by combining aptamer-modified Fe3O4@Ag nanoprobes and urease activity inhibition

A sensitive Ag+-mediated magnetic relaxation and colorimetry dual-mode sensing platform

To address the relatively low sensitivity of current redox reagent-mediated magnetic relaxation sensing methods, we present a novel Ag+-mediated magnetic sensing platform that enhances the sensitivity by three orders of magnitude. The new sensing platform is based on Ag+-catalyzed oxidation of Mn2+ to KMnO4, accompanied by a distinct color change, which facilitates colorimetric detection. In the case of insufficient Ag+ ions, MnO2 is an additional oxidation product and the KMnO4/MnO2 ratio is dependent on the concentration of Ag+. When combined with a specific quantity of reducing agent, both KMnO4 and MnO2 are reduced to Mn2+ with a large relaxivity, and the concentration of Mn2+ in the resultant solution inversely correlates with the amount of KMnO4 since KMnO4 consumes more reductant during reduction. Consequently, the transverse relaxation rate of the solution exhibits a negative correlation with the Ag+ concentration. Thus, by coupling this Ag+-mediated Mn2+ to KMnO4 transformation with reactions that modulate Ag+ concentration, a dual-mode sensing platform for magnetic relaxation and colorimetry can be realized. Herein, we take H2O2 as an example to verify the detection performance of this sensing platform since H2O2 can oxidize Ag0 in Ag@Fe3O4 nanoparticles to Ag+. Experimental findings demonstrate detection limits of 10 nM and 20 nM for the magnetic relaxation and colorimetry modes, respectively, affirming the excellent sensitivity and the potential practical application of this strategy.

Dual-Channel Fluorescent/Colorimetric-Based OPD-Pd/Pt NFs Sensor for High-Sensitivity Detection of Silver Ions

Silver ions (Ag+) exist widely in various areas of human life, and the food contamination caused by them poses a serious threat to human health. Among the numerous methods used for the detection of Ag+, fluorescence and colorimetric analysis have attracted much attention due to their inherent advantages, such as high sensitivity, simple operation, short time, low cost and visualized detection. In this work, Pd/Pt nanoflowers (NFs) specifically responsive to Ag+ were synthesized in a simple way to oxidize o-phenylenediamine (OPD) into 2,3-diaminophenazine (DAP). The interaction of Ag+ with the surface of Pd/Pt NFs inhibits the catalytic activity of Pd/Pt NFs towards the substrate OPD. A novel dual-channel nanosensor was constructed for the detection of Ag+, using the fluorescence intensity and UV-vis absorption intensity of DAP as output signals. This dual-mode analysis combines their respective advantages to significantly improve the sensitivity and accuracy of Ag+ detection. The results showed that the limit of detection was 5.8 nM for the fluorescence channel and 46.9 nM for the colorimetric channel, respectively. Moreover, the developed platform has been successfully used for the detection of Ag+ in real samples with satisfactory recoveries, which is promising for the application in the point-of-care testing of Ag+ in the field of food safety.

The colorful world of sulfonephthaleins: Current applications in analytical chemistry for "old but gold" molecules

Sulfonephthaleins represent one of the most common and widely employed reactive dyes in analytical chemistry, thanks to their stability, low-cost, well-visible colors, reactivity and possibilities of chemical modification. Despite being first proposed in 1916, nowadays, these molecules play a fundamental role in biological and medical applications, environmental analyses, food quality monitoring and other fields, with a particular focus on low-cost and disposable devices or methods for practical applications. Since up to our knowledge, no reviews or book chapters focused explicitly on sulfonephthaleins have ever been published, in this review, we will briefly describe sulfonephthaleins history, their acid-base properties will be discussed, and the most recent applications in different fields will be presented, focusing on the last ten years literature (2014-2023). Finally, safety and environmental issues will be briefly discussed, despite being quite controversial.

Magnetofluid-integrated biosensors based on DNase-dead Cas12a for visual point-of-care testing of HIV-1 by an up and down chip

The CRISPR Cas system, as a novel nucleic acid detection tool, is often hindered by cumbersome experimental procedures, complicated reagent transfer processes, and associated aerosol pollution risks. In this study, an integrated nucleic acid detection platform named "up and down chip" was developed, which combined RT-RAA technology for nucleic acid amplification, DNase-dead Cas12a-modified magnetic beads for specific recognition of target nucleic acid, and HRP-TMB chromogenic reaction for signal output in different chambers of a single microfluidic chip. The magnetic beads were migrated in an up-and-down manner between different chambers through magnetic driving, achieving a "sample-in, result-out" detection mode. By introducing a homemade heating box for temperature control during the reaction and using the naked eye or a smartphone APP for color-based signal reading, no professional or precise instruments were required in this platform. Using this platform, highly sensitive detection of the HIV-1 genome as low as 250 copies (CPs) per mL was achieved within 100 min while maintaining good detection performance against common variants as well as excellent specificity and anti-interference ability. In addition, compared with qRT-PCR, it also exhibited good accuracy for 56 spiked plasma samples, indicating its promising potential for clinical application.

Bifunctionalized nanobioprobe based rapid color-shift assay for typhoid targeting Vi capsular polysaccharide

Typhoid fever is an acute illness caused by Salmonella Typhi and the current diagnostic gap leads to inaccurate, over-diagnosis of typhoid leading to excessive use of antibiotics. Herein, to address the challenges we describe a new rapid color-shift assay based on a novel bifunctional nanobioprobe (Vi-AgNP probe) that is functionalized with specific biomarker Vi polysaccharide and also has the co-presence of Ag as urease inhibitor. The immunoreactions between the Vi with specific antibodies (Abs) present in typhoid patient sample forms a shielding barrier over Vi-AgNP probe rendering the urease to be active, generating colored output. Vi polysaccharide coating on the AgNP was visualized using HRTEM. TEM was performed to get insight into shielding barrier formation by the Abs. MST (microscale thermophoresis) data showed less binding Kd of 7.43 μM in presence of Abs whereas probe with urease showed efficient binding with Kd 437 nM. The assay was validated using 53 human sera samples and proven effective with 100% sensitivity. The assay showed relative standard deviation (RSD) of 4.3% estimated using rabbit anti-Vi Abs. The entire procedure could be completed within 15 min. Unlike lateral flow based assays, our assay does not require multiple combination of Abs for detection. The assay format was also found compatible in paper strip test that provides promising opportunities to develop low-cost on-spot assay for clinical diagnostics.

Low-cost, portable, on-site fluorescent detection of As(III) by a paper-based microfluidic device based on aptamer and smartphone imaging

A turn-on fluorescent aptasensor based on a paper-based microfluidic chip was developed to detect arsenite via aptamer competition strategy and smartphone imaging. The chip was prepared by wax-printing hydrophilic channels on filter paper. It is portable, low-cost, and environmentally friendly. Double-stranded DNA consisting of aptamer and fluorescence-labeled complementary strands was immobilized on the reaction zone of the paper chip. Due to the specific strong binding between aptamer and arsenite, the fluorescent complementary strand was squeezed out and driven by capillary force to the detection area of the paper chip, so that the fluorescent signal arose in the detection area under the excitation wavelength of 488 nm. Arsenite can be quantified by using smartphone imaging and RGB image analysis. Under the optimal conditions, the paper-based microfluidic aptasensor exhibited excellent linear response over a wide range of 1 to 1000 nM, with a detection limit as low as 0.96 nM (3σ).

The Road to Unconventional Detections: Paper-Based Microfluidic Chips

Conventional detectors are mostly made up of complicated structures that are hard to use. A paper-based microfluidic chip, however, combines the advantages of being small, efficient, easy to process, and environmentally friendly. The paper-based microfluidic chips for biomedical applications focus on efficiency, accuracy, integration, and innovation. Therefore, continuous progress is observed in the transition from single-channel detection to multi-channel detection and in the shift from qualitative detection to quantitative detection. These developments improved the efficiency and accuracy of single-cell substance detection. Paper-based microfluidic chips can provide insight into a variety of fields, including biomedicine and other related fields. This review looks at how paper-based microfluidic chips are prepared, analyzed, and used to help with both biomedical development and functional integration, ideally at the same time.

Preparation of IgY Oriented Conjugated Fe3O4 MNPs as Immunomagnetic Nanoprobe for Increasing Enrichment Efficiency of Staphylococcus aureus Based on Adjusting the pH of the Solution System

Immunomagnetic separation based on Fe3O4 magnetic nanoparticles (MNPs) has been widely performed in sample pretreatment. The oriented conjugation strategy can achieve a better capture effect than the N-(3-dimethylamlnopropyl)-N'-ethylcarbodiimide hydrochloride (EDC) /N-hydroxysuccinimide (NHS) method. However, immunoglobulin yolk (IgY) cannot be oriented through an SPA strategy like immunoglobulin G (IgG). In this article, an oriented conjugation nanoprobe was prepared for the enrichment of bacteria based on pH adjusting. The main factors affecting the enrichment efficiency were studied, such as the pH of the buffer system, the concentration of IgY, the concentration of nanoprobe, and the enrichment time. Under the optimal conditions, the enrichment efficiency toward target bacteria could reach 92.8%. Combined with PCR, the limit of detection (LOD) was found to be 103 CFU/ml, which was lower than the PCR only. In conclusion, we provided a new protocol for the oriented conjugation of IgY and high sensitivity detection with simple pretreatment.

Microfluidic paper-based chip for parathion-methyl detection based on a double catalytic amplification strategy

The rapid detection of insecticides such as parathion-methyl (PM) requires methods with high sensitivities and selectivities. Herein, a dual catalytic amplification strategy was developed using Fe₃O₄ nanozyme-supported carbon quantum dots and silver terephthalate metal-organic frameworks (Fe₃O₄/C-dots@Ag-MOFs) as current amplification elements. Based on this strategy, a novel electrochemical microfluidic paper-based chip was designed to detect PM. Fe₃O₄/C-dots@Ag-MOFs were synthesised by a hydrothermal method, and a molecularly imprinted polymer (MIP) was then synthesised on the surface of Fe₃O₄/C-dots@Ag-MOFs using PM as a template molecule. Finally, the reaction zone of a chip was modified with MIP/Fe₃O₄/C-dots@Ag-MOFs. PM from a sample introduced into the reaction zone was captured by the MIP, which generated a reduction current response at - 0.53 V in a three-electrode system embedded in the chip. Simultaneous catalysis by Fe₃O₄/C-dots and Ag-MOFs significantly enhanced the signal. The chip had a detection limit of 1.16 × 10^-11 mol L^-1 and was successfully applied to the determination of PM in agricultural products and environmental samples with recovery rates ranging from 82.7 to 109%, with a relative standard deviation (RSD) of less than 5.0%. This approach of combining a dual catalytic amplification strategy with an MIP significantly increased the sensitivity as well as selectivity of chips and can potentially be used to detect a wide variety of target analytes using microfluidic paper-based chips.

A disposable gold foil paper-based aptasensor for detection of enteropathogenic Escherichia coli with SERS analysis and magnetic separation technology

Rapid and sensitive detection of enteropathogenic Escherichia coli (EPEC) in fluids with complex background is an important task for safety quality control in the field of medicine, environment, and food. In this study, a gold foil paper-based aptasensor was developed for the detection of enteropathogenic EPEC O26:K60 with surface-enhanced Raman spectroscopy (SERS) and magnetic separation technology mediated by Fe₃O₄@Au composite. The gold foil paper was firstly modified with thiolated capture probe and SERS tag. The thiolated aptamer probe for EPEC was immobilized onto a Fe₃O₄@Au composite. In the presence of EPEC, highly specific recognition between the aptamer probe and EPEC made the Fe₃O₄@Au composite partially dissociated from the gold foil paper. This led to a decreased Raman intensity response, which showed an obvious negative linear correlation with increasing concentration of EPEC over a wide concentration range from 10 to 10⁷ CFU/mL under an excitation wavelength of 633 nm. The detection limit was about 2.86 CFU/mL in a buffer solution and a licorice extractum and the detection time was only 2.5 h. The results demonstrate that the gold foil paper-based aptasensor can be an excellent biosensing platform that offers a reliable, rapid, and sensitive alternative for EPEC detection.

Simultaneous and sensitive determination of Escherichia coli O157:H7 and Salmonella Typhimurium using evanescent wave dual-color fluorescence aptasensor based on micro/nano size effect

The simultaneous and sensitive determination of two common pathogenic bacteria, Escherichia coli O157:H7 (E. coli O157:H7) and Salmonella Typhimurium (S. Typhimurium) was achieved using evanescent wave dual-color fluorescence aptasensor and the fiber nanoprobe through combining the micro/nano size and time-resolved effect. Two fluorescence labeled aptasensors, Cy3-apt-E and Cy5.5-apt-S, were regarded as biorecognition elements and signal reporters for E. coli O157:H7 and S. Typhimurium, which were alternatively excited by evanescent waves originated from 520 nm to 635 nm excitation lights, respectively. The fiber nanoprobe with in-situ etched nanopores was used for distinguishing free aptasensors and aptasensors bound to pathogenic bacteria based on the limited penetrated depth of evanescent wave and the significant size difference of bacteria and nanopore. The E. coli O157:H7 and S. Typhimurium were directly and simultaneously quantitated in less than 35 min without the requirement of the complex immobilization of biorecognition molecules and bacteria enrichment/separation processes. The limits of detection of E. coli O157:H7 and S. Typhimurium were 340 CFU/mL and 180 CFU/mL, respectively. The satisfied recovery rate of real samples testing verified the feasibility and accuracy of the proposed method. Our strategy not only greatly simplifies the detection and identification process of multiple pathogenic bacteria, but also is easy to extend as a universal technology for sensitive determination of other bacteria using their respective biorecognition molecules.

Recent progress in the optical detection of pathogenic bacteria based on noble metal nanoparticles

Pathogenic bacteria have become a huge threat to social health and economy for their frighteningly infectious and lethal capacity. It is quite important to make a diagnosis in advance to prevent infection or allow a rapid treatment after infection. Noble metal nanoparticles, due to their unique physicochemical properties, especially optical properties, have drawn a great attention during the past decades and have been widely applied into all kinds of fields related to human health. By utilizing these noble metal nanoparticles, optical diagnosis platforms towards pathogenic bacteria have emerged continually, providing highly sensitive, selective, and particularly facile detection tools for clinic or point-of-care diagnosis. This review summarizes the recent development in this field. It begins with a brief introduction of pathogenic bacteria and noble metal nanoparticles. And then, optical detection methods are systematically discussed in three distinct aspects. In addition to these proof-of-concept methods, corresponding algorithms and point-of-care detection devices are also described. Finally, the review ends up with subjective views on present limitations and some appropriate advice for future research directions.

Selective aptamer conjugation to silver-coated magnetite nanoparticles for magnetic solid-phase extraction of trace amounts of Pb2+ ions

Herein, a novel aptamer-functionalized magnetic adsorbent was developed and combined with magnetic solid-phase extraction (MSPE) for the specific enrichment of Pb²⁺ ions prior to flame atomic absorption spectrometric detection.