A new sensor based on an amino-montmorillonite-modified inkjet-printed graphene electrode for the voltammetric determination of gentisic acid

A novel electrochemical sensor based on an Fe–N–C/AuNP nanohybrid for rapid and sensitive gallic acid detection

An Fe–N–C/AuNP nanohybrid was combined with a glassy carbon electrode to construct a novel electrochemical sensor for rapid detection of gallic acid (GA). The sensor exhibited excellent performance to detect GA with a wide linear response range and low detection limit.

Fabrication of an Organofunctionalized Talc-like Magnesium Phyllosilicate for the Electrochemical Sensing of Lead Ions in Water Samples

A talc-like magnesium phyllosilicate functionalized with amine groups (TalcNH₂), useful as sensor material in voltammetry stripping analysis, was synthesized by a sol-gel-based processing method. The characterizations of the resulting synthetic organoclay by scanning electron microscopy (SEM), X-ray diffraction, N₂ sorption isotherms (BET method), Fourier transform infrared spectroscopy (FTIR), CHN elemental analysis and UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS) demonstrated the effectiveness of the process used for grafting of amine functionality in the interlamellar clay. The results indicate the presence of organic moieties covalently bonded to the inorganic lattice of talc-like magnesium phyllosilicate silicon sheet, with interlayer distances of 1568.4 pm. In an effort to use a talc-like material as an electrode material without the addition of a dispersing agent and/or molecular glue, the TalcNH₂ material was successfully dispersed in distilled water in contrast to natural talc. Then, it was used to modify a glassy carbon electrode (GCE) by drop coating. The characterization of the resulting modified electrode by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) revealed its charge selectivity ability. In addition, EIS results showed low charge transfer resistance (0.32 Ω) during the electro-oxidation of [Fe(CN)₆]^3-. Kinetics studies were also performed by EIS, which revealed that the standard heterogeneous electron transfer rate constant was (0.019 ± 0.001) cm.s^-1, indicating a fast direct electron transfer rate of [Fe(CN)₆]^3- to the electrode. Using anodic adsorptive stripping differential pulse voltammetry (DPV), fast and highly sensitive determination of Pb(II) ions was achieved. The peak current of Pb²⁺ ions on TalcNH₂/GCE was about three-fold more important than that obtained on bare GCE. The calculated detection and quantification limits were respectively 7.45 × 10^-8 M (S/N = 3) and 24.84 × 10^-8 M (S/N 10), for the determination of Pb²⁺ under optimized conditions. The method was successfully used to tap water with satisfactory results. The results highlight the efficient chelation of Pb²⁺ ions by the grafted NH₂ groups and the potential of talc-like amino-functionalized magnesium phyllosilicate for application in electrochemical sensors.

Amino-Functionalized Laponite Clay Material as a Sensor Modifier for the Electrochemical Detection of Quercetin

In this work, an electrode modified with an amino-functionalized clay mineral was used for the electrochemical analysis and quantification of quercetin (QCT). The resulting amine laponite (LaNH₂) was used as modifier for a glassy carbon electrode (GCE). The organic-inorganic hybrid material was structurally characterized using X-ray diffraction, Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and CHN elemental analysis. The covalent grafting of the organosilane to the clay backbone was confirmed. The charge on the aminated laponite, both without and with the protonation of NH₂ groups, was evaluated via cyclic voltammetry. On the protonated amine (LaNH₃⁺)-modified GCE, the cyclic voltammograms for QCT showed two oxidation peaks and one reduction peak in the range of -0.2 V to 1.2 V in a phosphate buffer-ethanol mixture at pH 3. By using the differential pulse voltammetry (DPV), the modification showed an increase in the electrode performance and a strong pH dependence. The experimental conditions were optimized, with the results showing that the peak current intensity of the DPV increased linearly with the QCT concentration in the range from 2 × 10^-7 M to 2 × 10^-6 M, leading to a detection limit of 2.63 × 10^-8 M (S/N 3). The sensor selectivity was also evaluated in the presence of interfering species. Finally, the proposed aminated organoclay-modified electrode was successfully applied for the detection of QCT in human urine. The accuracy of the results achieved with the sensor was evaluated by comparing the results obtained using UV-visible spectrometry.

Hydroxyapatite/L-Lysine Composite Coating as Glassy Carbon Electrode Modifier for the Analysis and Detection of Nile Blue A

An amperometric sensor was developed by depositing a film coating of hydroxyapatite (HA)/L-lysine (Lys) composite material on a glassy carbon electrode (GCE). It was applied for the detection of Nile blue A (NBA). Hydroxyapatite was obtained from snail shells and its structural properties before and after its combination with Lys were characterized using X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) surface area analyses. The coupling of Lys to HA was attributed to favorable interaction between negatively charged -COO^- groups of Lys and divalent ions Ca²⁺ of HA. Electrochemical investigations pointed out the improvement in sensitivity of the GCE/Lys/HA sensor towards the detection of NBA in solution. The dependence of the peak current and potential on the pH, scan rate, and NBA concentration was also investigated. Under optimal conditions, the GCE/Lys/HA sensor showed a good reproducibility, selectivity, and a NBA low detection limit of 5.07 × 10^-8 mol L^-1. The developed HA/Lys-modified electrode was successfully applied for the detection of NBA in various water samples.

Spectral and time domain fluorescence spectroscopy of gentisic acid molecule in protic and aprotic polymer matrix

In the present work, the effect of polymer microenvironment on the photophysics of gentisic acid molecule [2,5-dihydroxybenzoic acid] (GA), steady-state and time-domain fluorescence measurements at different pH conditions were carried out in protic [polyvinyl alcohol PVA] and aprotic [polymethyl methacrylate (PMMA)] polymer matrices. Change in the proticity of the microenvironment of the polymer traps different ionic species along with the neutral form of rotamer P and R conformers of GA molecule, are found to be responsible for the change in the spectral, multi-exponential decay behaviour. In protic polymer, the appearance of a single emission band indicates, dissociation of the GA molecule is very high, and it present as a monoanion along with hydrogen-bonded P and R rotamers. However, in the basic polymer film, most of the conformers of R converted to the anion. In contrast, protonation slows down the dissociation of both P and R forms in the acidic film. Unlike PVA matrix, in PMMA, dual emission band appears due to slow dissociation of GA molecule and hydrogen-bonded rotamer P, and R form exists with monoanion species. The magnitude of large stokes shifted red emission due to excited-state intramolecular proton transfers (ESIPT) found grater in rotamer P compared to its anionic species (green emission) and a blue emission corresponds to rotamer R.