3D flower-liked Fe3O4/C for highly sensitive magnetic dispersive solid-phase extraction of four trace non-steroidal anti-inflammatory drugs

Fabrication of sea urchin shaped polyaniline-modified magnetic microporous organic network for efficient extraction of non-steroidal anti-inflammatory drugs from animal-derived food samples

In this work, a novel polyaniline-modified magnetic microporous organic network (MMON-PANI) composite was fabricated for effective magnetic solid phase extraction (MSPE) of five typical nonsteroidal anti-inflammatory drugs (NSAIDs) from animal-derived food samples before high performance liquid chromatography (HPLC) detection. The core-shell sea urchin shaped MMON-PANI integrates the merits of Fe3O4, MON, and PANI, exhibiting large specific surface area, rapid magnetic responsiveness, good stability, and multiple binding sites to NSAIDs. Convenient and effective extraction of trace NSAIDs from chicken, beef and pork samples is realized on MMON-PANI via the synergetic π-π, hydrogen bonding, hydrophobic, and electrostatic interactions. Under optimal conditions, the MMON-PANI-MSPE-HPLC-UV method exhibits wide linear ranges (0.2-1000 μg L-1), low limits of detection (0.07-1.7 μg L-1), good precisions (intraday and inter-day RSDs < 5.4 %, n = 3), large enrichment factors (98.6-99.9), and less adsorbent consumption (3 mg). The extraction mechanism and selectivity of MMON-PANI are also evaluated in detail. This work proves the incorporation of PANI onto MMON is an efficient way to promote NSAIDs enrichment and provides a new strategy to synthesize multifunctional MON-based composites in sample pretreatment.

Pompon mum-like ionic covalent organic framework nanocomposites for efficient solid-phase extraction of nonsteroidal anti-inflammatory drugs

Molecularly imprinted ionic covalent organic framework nanocomposites (MI-IC-COF@SnO2) were prepared as potential adsorbents for the enhanced adsorption of nonsteroidal anti-inflammatory drugs (NSAIDs) from aqueous solution. The resulting material exhibited a pompon mum-like structure, featuring a large surface area, and well-defined mesopores. The presence of uniform positive ions within the three-dimensional skeleton of MI-IC-COF@SnO2 facilitated a rapid adsorption rate and high adsorption capacity for target analytes. Thermodynamic fitting revealed the adsorption process of NSAIDs to be feasible, endothermic, and spontaneous. Additionally, the adsorbent material exhibited respectable selectivity, as evidenced by imprinting factor values ranging from 2.8 to 6.7. Utilizing MI-IC-COF@SnO2 as the sorbent, a solid-phase extraction method coupled with high-performance liquid chromatography-ultraviolet detection (SPE-HPLC-UV) was developed and optimized. The proposed method demonstrated good linear range with determination coefficients of 0.998-0.999, and low limit of detection (0.18-1.35 µg L-1). Recoveries of NSAIDs in urine and river water samples were 78.1 %-106.1 %, with relative standard deviations lower than 12.5 %. This rapid and sensitive method enables the determination of NSAIDs at trace levels in complex matrices, providing reliable and reproducible results.

Sunflower-like missing-linker covalent organic framework for efficient extraction of non-steroidal anti-inflammatory drugs

As excellent crystalline materials, covalent organic frameworks (COFs) are widely used in drug adsorption. In this work, a defective engineering strategy was proposed for designing and preparing the functionalized end-capping monomer and missing-linker COFs. The missing-linker COF 2,4,6-trihydroxybenzene-1,3,5-tricarbaldehyde compound with glycidyltrimethyl ammonium chloride modified benzene-1,4-diamine (TpPa-GTA) was synthesized through Schiff base reaction with wide pore size distribution for adsorption of four nonsteroidal anti-inflammatory drugs (NSAIDs). The adsorption process follows pseudo-second-order kinetics, and the four drugs reached adsorption equilibrium within 10 min. The sunflower-like structure helps to promote intraparticle diffusion during the adsorption process, thereby realizing the rapid adsorption of TpPa-GTA. The equilibrium isotherms fit well with both the Freundlich and Langmuir models, with a maximum adsorption capacity of 83.3-315 mg g-1 calculated from the Langmuir model. Based on the detection results of Zeta potential and XPS, the adsorption mechanism was inferred, and the rapid capture of NSAIDs in the wide pH range of 4.0 to 7.5 was realized under electrostatic interaction, hydrogen bonding, and π-π interaction. The detection of lake and river samples using the missing adapter TpPa-GTA has a recovery rate of 84.2-117%, which provides a new approach to the adsorption of pollutants with COFs.

Analysis of NSAIDs in Rat Plasma Using 3D-Printed Sorbents by LC-MS/MS: An Approach to Pre-Clinical Pharmacokinetic Studies

Analytical sample preparation techniques are essential for assessing chemicals in various biological matrices. The development of extraction techniques is a modern trend in the bioanalytical sciences. We fabricated customized filaments using hot-melt extrusion techniques followed by fused filament fabrication-mediated 3D printing technology to rapidly prototype sorbents that extract non-steroidal anti-inflammatory drugs from rat plasma for determining pharmacokinetic profiles. The filament was prototyped as a 3D-printed sorbent for extracting small molecules using AffinisolTM, polyvinyl alcohol, and triethyl citrate. The optimized extraction procedure and parameters influencing the sorbent extraction were systematically investigated by the validated LC-MS/MS method. Furthermore, a bioanalytical method was successfully implemented after oral administration to determine the pharmacokinetic profiles of indomethacin and acetaminophen in rat plasma. The Cmax was found to be 0.33 ± 0.04 µg/mL and 27.27 ± 9.9 µg/mL for indomethacin and acetaminophen, respectively, at the maximum time (Tmax) (h) of 0.5–1 h. The mean area under the curve (AUC0–t) for indomethacin was 0.93 ± 0.17 µg h/mL, and for acetaminophen was 32.33± 10.8 µg h/mL. Owing to their newly customizable size and shape, 3D-printed sorbents have opened new opportunities for extracting small molecules from biological matrices in preclinical studies.

Dispersive solid-phase extraction of non-steroidal anti-inflammatory drugs in water and urine samples using a magnetic ionic liquid hypercrosslinked polymer composite

In this work, Friedel-Crafts alkylation was successfully applied to prepare a magnetic ionic liquid hypercrosslinked polymer composite (Fe₃O₄@IL-HCP), which was subsequently employed as magnetic solid-phase extraction (MSPE) adsorbent for the isolation and enrichment of trace non-steroidal anti-inflammatory drugs (NSAIDs). The developed composite was comprehensively characterized using various techniques, with the results indicating that it possessed high saturation magnetization (39.44 em g ^- 1), large specific surface area (175 m²g ^- 1), and high adsorption capacity for NSAIDs. The adsorption behavior and mechanisms were also investigated in detail. NSAIDs were adsorbed onto the Fe₃O₄@IL-HCP sorbent via a heterogeneous multilayer process consisting of hydrogen bonding and π-π and electrostatic interactions. Additionally, the composite's large surface area and multiple active sites enabled extraction equilibrium within 6 min. By coupling with high performance liquid chromatography (HPLC), the developed MSPE/HPLC method was applied for the determination of selected NSAIDs in water and urine samples. The developed method displayed wide linear ranges, low limits of detection (0.12-0.30 ng mL^-1 and 0.15-1.5 ng mL^-1 in water and urine samples, respectively), sufficient recoveries (92.8-109%), and good precision (relative standard deviations ≤ 4.6%). Thus, the findings of this work provide an appealing alternative for the extraction and determination of trace NSAIDs in environmental water and biological samples.

Functionalization of Tailored Porous Carbon Monolith for Decontamination of Radioactive Substances

As the control over radioactive species becomes critical for the contemporary human life, the development of functional materials for decontamination of radioactive substances has also become important. In this work, a three-dimensional (3D) porous carbon monolith functionalized with Prussian blue particles was prepared through removal of colloidal silica particles from exfoliated graphene/silica composite precursors. The colloidal silica particles with a narrow size distribution were used to act a role of hard template and provide a sufficient surface area that could accommodate potentially hazardous radioactive substances by adsorption. The unique surface and pore structure of the functionalized porous carbon monolith was examined using electron microscopy and energy-dispersive X-ray analysis (EDS). The effective incorporation of PB nanoparticles was confirmed using diverse instrumentations such as X-ray diffraction (XRD), Fourier-transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS). A nitrogen adsorption/desorption study showed that surface area and pore volume increased significantly compared with the starting precursor. Adsorption tests were performed with ¹³³Cs ions to examine adsorption isotherms using both Langmuir and Freundlich isotherms. In addition, adsorption kinetics were also investigated and parameters were calculated. The functionalized porous carbon monolith showed a relatively higher adsorption capacity than that of pristine porous carbon monolith and the bulk PB to most radioactive ions such as ¹³³Cs, ⁸⁵Rb, ¹³⁸Ba, ⁸⁸Sr, ¹⁴⁰Ce, and ²⁰⁵Tl. This material can be used for decontamination in expanded application fields.