Delayed asymptomatic coil migrations toward different arteries after aneurysmal embolization: case report

Hemodynamic factor evaluation using computational fluid dynamics analysis for de novo bleb formation in unruptured intracranial aneurysms

Background

Although bleb formation increases the risk of rupture of intracranial aneurysms, previous computational fluid dynamic (CFD) studies have been unable to identify robust causative hemodynamic factors, due to the morphological differences of prebleb aneurysm models and a small number of aneurysms with de novo bleb formation. This study investigated the influences of differences in the aneurysm-models and identify causative hemodynamic factors for de novo bleb formation.

Materials and methods

CFD analysis was conducted on three aneurysm models, actual prebleb, postbleb, and virtual prebleb models of two unruptured aneurysms with de novo bleb formation. A new multipoint method was introduced in this study. We evenly distributed points with a 0.5-mm distance on the aneurysm surface of the actual prebleb models (146 and 152 points in the individual aneurysm, respectively), and we statistically compared hemodynamics at the points in the areas with and without bleb formation (19 and 279 points, respectively).

Results

Visually, blebs formed on an aneurysm surface area with similar hemodynamic characteristics in the actual and virtual prebleb models. Statistical analysis using the multipoint method revealed that the de novo bleb formation area was significantly correlated with high pressure (p < 0.001), low wall shear stress (WSS) (p < 0.001), and the center of divergent WSS vectors (p = 0.025).

Conclusions

De novo bleb formation in intracranial aneurysms may occur in areas associated with the combination of high pressure, low WSS, and the center of divergent WSS vectors. The multipoint method is useful for statistical analysis of hemodynamics in a limited number of aneurysms.

Hemodynamic Analysis of a Three-Point Suture During Tapering Technique for Microanastomosis Using Computational Fluid Dynamics

The tapering technique is one of the useful methods of anastomosing 2 vessels with large discrepancies during microanastomoses. When the tapering technique is used, a three-point suture is always present. The authors analyzed the most appropriate suture technique for this using computational fluid dynamics. This aspect has not previously been addressed. Three different suture techniques were simulated: (1)

Three single-knot sutures (Type I);

(2)

Two single-knot sutures forming an X-shape (Type II); and

(3)

A single continuous ligature through the vascular wall (Type III).

Vascular models of these 3 types were created. The streamline, wall shear stress, and oscillatory shear index at the anastomosis site were measured using a previously prepared venous model. Streamline disruption was most severe for Type II. In all 3 types, the highest wall shear stress was recorded at the suture peak protruding into the vessel. The maximum oscillatory shear index was highest in Type II, and lowest in Type III. The present results suggest that Type III is the best three-point suturing method for the tapering technique.

Hemodynamic Analysis of a Microanastomosis Using Computational Fluid Dynamics

Background

Technical issues in free flap transfer, such as the selection of recipient vessels and the positioning and method of anastomosis of the vascular pedicle, have been the subject of vigorous debate. Recent developments in computational fluid dynamics (CFD) have enabled the analysis of blood flow within microvessels. In this study, CFD was used to analyze hemodynamics in a microanastomosis.

Methods

In the fluid calculation process, the fluid domain modelizes microvessels with anastomosis. The inlet flow conditions were measured as venous waveform, and the fluid is simulated as blood. Streamlines (SL), wall shear stress (WSS), and oscillatory shear index (OSI) at the anastomosis were visualized and analyzed for observing effects from the flow field.

Results

Some flow disruption was evident as the SL passed over the sutures. The maximum recorded WSS was 13.37 Pa where the peak of a suture was exposed in the lumen. The local maximum value of the OSI was 0.182, recorded at the base of the anastomosis on the outflow side.

Conclusion

In the ideal anastomosis, the SL is disrupted as little as possible by the sutures. The WSS indicated that thrombus formation is unlikely to occur at suture peaks, but more likely to occur at the base of sutures, where the OSI is high. Tight suture knots are important in microanastomosis.

Prediction of internal carotid artery aneurysm recurrence by pressure difference at the coil mass surface

PURPOSE

A previous study on computational fluid dynamics reported that a high pressure difference (PD) at the surface of a coil mass is a strong predictor of aneurysm recurrence after coil embolization. PD was calculated using a virtual post-coiling model (VM), created by manually cutting the aneurysm by the flat plane from an anatomic model created with pre-coil embolization data; however, its credibility has not been fully evaluated. This study aims to clarify whether PD values calculated using the post-coiling model, which reflects the actual coil plane, are a strong predictor of aneurysm recurrence.

METHODS

Fifty internal carotid artery aneurysms treated with endovascular coil embolization were analyzed (7 recanalized, 43 stable). We created and subjected two post-coiling models, namely, VM and the real post-coiling model (RM), constructed from the post-coil embolization data. The relationship between PD and aneurysm recurrence was examined using these models. PD and its constituent three parameters were compared between VM and RM.

RESULTS

PD values calculated using RM showed significantly higher aneurysm recurrence in recurrence group than stable group (p < 0.001), and multivariate analysis showed that PD in RM (p = 0.02; odds ratio, 36.24) was significantly associated with aneurysm recurrence. The receiver operating characteristic analysis revealed that PD values accurately predicted aneurysm recurrence (area under the curve, 0.977; cutoff value, 3.08; sensitivity, 100%; specificity, 97.7%). All four parameters showed a significant correlation with VM and RM (p < 0.001).

CONCLUSION

Use of PD to predict recurrence after coil embolization can be clinically relevant.

A case of delayed distal coil migration after coil embolization of an unruptured distal azygos anterior cerebral artery aneurysm: A case report and literature review

Intraprocedural coil migration during endovascular treatment for an aneurysm that might carry serious ischemic complications is well known. On the other hand, delayed coil migration after endovascular treatment for an aneurysm is very rare. A 77-year-old woman was incidentally diagnosed with unruptured aneurysm associated with distal azygos anterior cerebral artery (ACA). The aneurysm was located at the distal bifurcation of the azygos ACA and was wide necked (approximately 7 mm in diameter). Endovascular coil embolization was selected and the aneurysm was occluded successfully, but 29 days after endovascular therapy, follow-up computed tomography (CT) and magnetic resonance (MR) angiography revealed distal coil migration in the peripheral portion of the ACA. In addition, CT on day 57 after therapy revealed the migrated coil had moved more distally. Fortunately, in the course of these events, the patient remained asymptomatic. To the best of our knowledge, this represents the first case of delayed distal coil migration associated with relatively rare azygos ACA aneurysm, and also the first report confirming more distal coil movement over time. In the future, a large number of patients could develop this complication as more aneurysms are aggressively treated with endovascular treatment. Knowledge regarding the possibility of delayed coil migration is thus important.

Symptomatic delayed coil migration after balloon assisted embolization: An underreported adverse event?

Microsurgical clipping is still regarded as the gold-standard treatment for broad-neck intracranial aneurysms. New endovascular techniques like balloon or stent assisted coiling are quickly rising to the challenge and showing promising outcomes. As a result, broad-neck aneurysms are increasingly addressed by these techniques despite they have not been tested against clipping in a randomized controlled trial and long-term complications might be unknown yet. Intraprocedural coil migration has been well documented in the literature, but the same complication in a delayed fashion is scarcely reported. We present a case of delayed coil migration occurring after a balloon-assisted embolization of a wide-necked intracranial aneurysm and we perform a literature review for similar cases. We discuss how, despite seeming an extremely rare complication, with new endovascular techniques increasingly perceived as the safer option in any aneurysm, potential adverse events may become more frequent. Strategies proposed to address this developing scenario are also reviewed.