Evaluation of ATR-FTIR spectrometry in the fingerprint region combined with chemometrics for simultaneous determination of benzene, toluene, and xylenes in complex hydrocarbon mixtures

Spectroscopy as a useful tool for the identification of changes with time in post-mortem vitreous humor for forensic toxicology purposes

Vitreous humor (VH) is an alternative biological matrix with a great advantage of longer availability for analysis due to the lack of many enzymes. The use of VH in forensic toxicology may have an added benefit, however, this application requires rapid, simple, non-destructive, and relatively portable analytical analysis methods. These requirements may be met by Fourier transform infrared spectroscopy technique (FT-IR) equipped with attenuated total reflection accessory (ATR). FT-IR spectra of vitreous humor samples, deposited on glass slides, were collected and subsequent chemometric data analysis by means of Hierarchical Cluster Analysis and Principal Component Analysis was conducted. Differences between animal and human VH samples and human VH samples stored for diverse periods of time were detected. A kinetic study of changes in the VH composition up to 2 weeks showed the distinction of FT-IR spectra collected on the 1st and 14th day of storage. In addition, data obtained for the most recent human vitreous humor samples—collected 3 and 2 years before the study, presented successful discrimination of all time points studied. The method introduced was unable to detect mephedrone addition to VH in the concentration of 10 µg/cm3.

Graphic abstract

Targeted degradation of dimethyl phthalate by activating persulfate using molecularly imprinted Fe-MOF-74

Adsorptive removal of dimethyl phthalate (DMP) in water combined with advanced oxidation processes (AOPs) has attracted interest. In this work, the adsorptive and catalytic properties of an Fe-based metal-organic framework (Fe-MOF-74) have been improved by molecular imprinting technique. The adsorption behaviors have been evaluated by the Freundlich and pseudo-second-order model. The results have shown that selective adsorption ability of the material for DMP was highly enhanced and chemisorption was dominating. A 1.5-fold increase in catalytic rate after being modified by molecular imprinting indicated that the selective adsorption is crucial. In the synergy of adsorption and catalysis, DMP was first specifically adsorbed on the surface of the material by hydrogen bonds and electrostatic interactions. Then, hydroxyl radicals and sulfate radicals, which were both generated via activation of persulfate (PS), catalytically oxidized DMP. The degradation rate can rapidly reach around 90% in 30 min and three possible degradation pathways were proposed. The molecular imprinting modified catalyst can be used for DMP effective degradation in water.

Selective removal and persulfate catalytic decomposition of diethyl phthalate from contaminated water on modified MIL100 through surface molecular imprinting

Adsorptive removal of phthalate esters from wastewater combined with their persulfate (PS) catalytic degradation has attracted the attention of many researchers. In this study, the adsorptive and catalytic properties of an MIL100 material obtained by a green synthetic route have been optimized by a surface molecular imprinting technique. Results have shown that there are two steps in the molecular imprinting process. A polymerization is first carried out in the internal channels of the material and the imprinting layer is then formed on the surface. The relative proportions of the starting materials for the synthesis have been optimized through the design of a three-dimensional response surface. The amount of pollutant adsorbed was increased fourfold after surface imprinting, reaching 13.6 mg g^-1. The homogeneity of the recognition sites has been evaluated by dynamics calculations and the Freundlich equation. The selective adsorption ability of the material for diethyl phthalate was improved, and the process involved chemical adsorption. The catalytic properties of the material after imprinting were increased about 1.5-fold, indicating that selective adsorption is important. Such molecularly imprinted polymers may potentially serve as good functional materials for the removal of phthalate esters from wastewater.

ATR-FTIR spectroscopy and chemometric techniques for determination of polymer solution viscosity in the presence of SiO2 nanoparticle and salinity

An analytical method was proposed for quantitative determination of rheological properties of polyacrylamide (PAM) solution in the presence of SiO₂ nanoparticle and NaCl. The viscosity of PAM-SiO₂ nanohybrid solution was predicted using attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy in the wavenumber range of 800-3000 cm^-1 and chemometrics methods. Support vector machine regression (SVM-R) as a non-linear multivariate calibration procedure and partial least squares regression (PLS-R) as a linear procedure were applied for calibration. Preprocessing methods such as baseline correction and standard normal variate (SNV) were also utilized. Root mean square error of prediction (RMSEP) in SNV-SVM and SNV-PLS methods were 3.231 and 6.302, respectively. Considering the complexity of the samples, the SVM-R model was found to be reliable. The proposed method is rapid and simple without any sample preparation step for measurement of the viscosity of polymer solutions in chemical enhanced oil recovery (CEOR).