The fully synthetic, bio-coated MIRO® CORNEA UR keratoprosthesis: development, preclinical testing, and first clinical results

The landscape of clinical trials in corneal regeneration: A systematic review of tissue engineering approaches in corneal disease

The limited availability of a healthy donor cornea and the incidence of allograft failure led researchers to seek other corneal substitutes via tissue engineering. Exploring the trend of clinical trials of the cornea with the vision of tissue engineering provides an opportunity to reveal future potential corneal substitutes. The results of this clinical trial are beneficial for future study designs to overcome the limitations of current therapeutic approaches. In this study, registered clinical trials of bio-based approaches were reviewed for corneal regeneration on March 22, 2024. Among the 3955 registered trials for the cornea, 392 trials were included in this study, which categorized in three main bio-based scaffolds, stem cells, and bioactive macromolecules. In addition to the acellular cornea and human amniotic membrane, several bio-based materials have been introduced as corneal substrates such as collagen, fibrin, and agarose. However, some synthetic materials have been introduced in recent studies to improve the desired properties of bio-based scaffolds for corneal substitutes. Nevertheless, new insights into corneal regenerative medicine have recently emerged from cell sheets with autologous and allogeneic cell sources. In addition, the future perspective of corneal regeneration is described through a literature review of recent experimental models.

Artificial Cornea: Past, Current, and Future Directions

Corneal diseases are a leading cause of blindness with an estimated 10 million patients diagnosed with bilateral corneal blindness worldwide. Corneal transplantation is highly successful in low-risk patients with corneal blindness but often fails those with high-risk indications such as recurrent or chronic inflammatory disorders, history of glaucoma and herpetic infections, and those with neovascularisation of the host bed. Moreover, the need for donor corneas greatly exceeds the supply, especially in disadvantaged countries. Therefore, artificial and bio-mimetic corneas have been investigated for patients with indications that result in keratoplasty failure. Two long-lasting keratoprostheses with different indications, the Boston type-1 keratoprostheses and osteo-odonto-keratoprostheses have been adapted to minimise complications that have arisen over time. However, both utilise either autologous tissue or an allograft cornea to increase biointegration. To step away from the need for donor material, synthetic keratoprostheses with soft skirts have been introduced to increase biointegration between the device and native tissue. The AlphaCor™, a synthetic polymer (PHEMA) hydrogel, addressed certain complications of the previous versions of keratoprostheses but resulted in stromal melting and optic deposition. Efforts are being made towards creating synthetic keratoprostheses that emulate native corneas by the inclusion of biomolecules that support enhanced biointegration of the implant while reducing stromal melting and optic deposition. The field continues to shift towards more advanced bioengineering approaches to form replacement corneas. Certain biomolecules such as collagen are being investigated to create corneal substitutes, which can be used as the basis for bio-inks in 3D corneal bioprinting. Alternatively, decellularised corneas from mammalian sources have shown potential in replicating both the corneal composition and fibril architecture. This review will discuss the limitations of keratoplasty, milestones in the history of artificial corneal development, advancements in current artificial corneas, and future possibilities in this field.

Stem cell-based therapeutic strategies for corneal epithelium regeneration

Any significant loss of vision or blindness caused by corneal damages is referred to as corneal blindness. Corneal blindness is the fourth most common cause of blindness worldwide, representing more than 5% of the total blind population. Currently, corneal transplantation is used to treat many corneal diseases. In some cases, implantation of artificial cornea (keratoprosthesis) is suggested after a patient has had a donor corneal transplant failure. The shortage of donors and the side effects of keratoprosthesis are limiting these approaches. Recently, researchers have been actively pursuing new approaches for corneal regeneration because of these limitations. Nowadays, tissue engineering of different corneal layers (epithelium, stroma, endothelium, or full thickness tissue) is a promising approach that has attracted a great deal of interest from researchers and focuses on regenerative strategies using different cell sources and biomaterials. Various sources of corneal and non-corneal stem cells have shown significant advantages for corneal epithelium regeneration applications. Pluripotent stem cells (embryonic stem cells and iPS cells), epithelial stem cells (derived from oral mucus, amniotic membrane, epidermis and hair follicle), mesenchymal stem cells (bone marrow, adipose-derived, amniotic membrane, placenta, umbilical cord), and neural crest origin stem cells (dental pulp stem cells) are the most promising sources in this regard. These cells could also be used in combination with natural or synthetic scaffolds to improve the efficacy of the therapeutic approach. As the ocular surface is exposed to external damage, the number of studies on regeneration of the corneal epithelium is rising. In this paper, we reviewed the stem cell-based strategies for corneal epithelium regeneration.

Biomimetic bone-like composites as osteo-odonto-keratoprosthesis skirt substitutes

Osteo-odonto-keratoprostheses, incorporating dental laminate material as an anchoring skirt around a central poly(methyl methacrylate) (PMMA) optic, have been used to replace the cornea for many years. However, there are many intricacies associated with the use of autologous dental laminate material, surgical complexity and skirt erosion. Tissue engineering approaches to bone replacement may offer suitable alternatives in osteo-odonto-keratoprosthesis (OOKP) surgery. In this study, a hydrogel polymer composite was investigated as a synthetic substitute for the OOKP skirt. A novel high strength interpenetrating network (IPN) hydrogel composite with nano-crystalline hydroxyapatite (nHAp) coated poly (lactic-co-glycolic acid) PLGA microspheres was created to mimic the alveo-dental lamina by employing agarose and poly(ethylene glycol) diacrylate (PEGDA) polymers. The incorporation of nHAp coated PLGA microspheres into the hybrid IPN network provide a micro-environment similar to that of skeletal tissues and improve cellular response. Agarose was used as a first network to encapsulate keratocytes/3T3 fibroblasts and PEGDA (6000 Da) was used as a second network with varying concentrations (20 and 40 wt %) to produce a strong and biocompatible scaffold. An increased concentration of either agarose or PEG-DA and incorporation of nHAp coated PLGA microspheres led to an increase in the elastic modulus. The IPN hydrogel combinations supported the adhesion and proliferation of both fibroblast and ocular human keratocyte cell types during in in-vitro testing. The cells endured the encapsulation process into the IPN and remained viable at 1 week post-encapsulation in the presence of nHAp coated microspheres. The material did not induce significant production of inflammatory cytokine IL-6 in comparison to a positive control (p < 0.05) indicating non-inflammatory potential. The nHAp encapsulated composite IPN hydrogels are mechanically strong, cell supportive, non-inflammatory materials supporting their development as OOKP skirt substitutes using a new approach to dental laminate biomimicry in the OOKP skirt material.

Corneal epithelium tissue engineering: recent advances in regeneration and replacement of corneal surface

Currently, many corneal diseases are treated by corneal transplantation, artificial corneal implantation or, in severe cases, keratoprosthesis. Owing to the shortage of cornea donors and the risks involved with artificial corneal implants, such as infection transmission, researchers continually seek new approaches for corneal regeneration. Corneal tissue engineering is a promising approach that has attracted much attention from researchers and is focused on regenerative strategies using various biomaterials in combination with different cell types. These constructs should have the ability to mimic the native tissue microenvironment and present suitable optical, mechanical and biological properties. In this article, we review studies that have focused on the current clinical techniques for corneal replacement. We also describe tissue-engineering and cell-based approaches for corneal regeneration.

[Morphological changes in rabbit cornea after implantation of a new keratoprosthesis supporting plate]

PURPOSE

To evaluate biocompatibility of the new keratoprosthesis supporting plates (KSP) in rabbits in vivo.

MATERIAL AND METHODS

The study included 15 chinchilla rabbits. In the first group (5 rabbit eyes) KSP made of hydrophobic acryl with square penetrating holes of 220×220 micron (model 1) were inserted into rabbits' corneas. In the second group (5 eyes), KSP made of hydrophobic acryl were used that had trapezoidal fenestrations with size (from 170×130 micron to 180×70 microns) gradually changing from periphery to the center of KSP (model 2). The control group rabbits (5 eyes) had ¹/₂ of Fyodorov-Zuev KSP made of titanium implanted. All animals were observed for up to 3 months with biomicroscopy and optical coherence tomography of the anterior segment. The animals were then euthanized and had their corneo-scleral discs excised and then examined with optical microscopy and scanning electron microscopy (SEM).

RESULTS

After 3 months, there was only one case of KSP protrusion in the first group. In the second group, thinning of the corneal layers above the central part of KSP occurred in one case. The presence of polymer KSP (of both models) in the corneal stroma was found not to cause formation of rough fibrotic tissue. At the same time, adhered cellular and fibrous elements were discovered on the surface and inside the holes of the polymer KSP, while on the surface of the titanium plate cellular elements were absent.

CONCLUSION

Supporting plates made of hydrophobic acrylic material can potentially serve as a foundation for the new keratoprosthesis design.

3D bioprinting for artificial cornea: Challenges and perspectives

Corneal disease is one of the most important causes of blindness worldwide. Currently, the dominating treatment of corneal blindness is corneal transplantation. However, the main source of cornea for transplantation is based on donations which is far from enough to meet the requirement (less than 1:70 of cases). The severe shortage of donor cornea promotes the studies of effective corneal alternatives. However, many problems remain and can't be solved in current researches, such as original geometry reconstruction and ocular optical function restoring. 3D bioprinting can be a promising approach for corneal substitution. The advantages of this technology in corneal regeneration enable personalized corneal implant and single or multi-layer corneal equivalents with controllable structure and designed refractive ability. In this review, the progress, applications and limitations of most influential works among current keratoprosthesis and tissue-engineering cornea researches are discussed. Then the applications of 3D bioprinting in manufacturing multi-layered structures and surface are mentioned. Further, the potential, advantages in current research of 3D bioprinting single or multi-layer corneal equivalents and alternatives are discussed. Finally, an insight into the technical challenges and prospective facing the future research of 3D bioprinting corneal alternatives in vivo and in vitro is provided.

Corneal Repair and Regeneration: Current Concepts and Future Directions

The cornea is a unique tissue and the most powerful focusing element of the eye, known as a window to the eye. Infectious or non-infectious diseases might cause severe visual impairments that need medical intervention to restore patients' vision. The most prominent characteristics of the cornea are its mechanical strength and transparency, which are indeed the most important criteria considerations when reconstructing the injured cornea. Corneal strength comes from about 200 collagen lamellae which criss-cross the cornea in different directions and comprise nearly 90% of the thickness of the cornea. Regarding corneal transparency, the specific characteristics of the cornea include its immune and angiogenic privilege besides its limbus zone. On the other hand, angiogenic privilege involves several active cascades in which anti-angiogenic factors are produced to compensate for the enhanced production of proangiogenic factors after wound healing. Limbus of the cornea forms a border between the corneal and conjunctival epithelium, and its limbal stem cells (LSCs) are essential in maintenance and repair of the adult cornea through its support of corneal epithelial tissue repair and regeneration. As a result, the main factors which threaten the corneal clarity are inflammatory reactions, neovascularization, and limbal deficiency. In fact, the influx of inflammatory cells causes scar formation and destruction of the limbus zone. Current studies about wound healing treatment focus on corneal characteristics such as the immune response, angiogenesis, and cell signaling. In this review, studied topics related to wound healing and new approaches in cornea regeneration, which are mostly related to the criteria mentioned above, will be discussed.

Lucia and Beyond: Development of an Affordable Keratoprosthesis

PURPOSE

Severe corneal disease contributes significantly to the global burden of blindness. Corneal allograft surgery remains the most commonly used treatment, but does not succeed long term in every patient, and the odds of success fall with each repeated graft. The Boston keratoprosthesis type I has emerged as an alternative to repeat corneal allograft. However, cost limits its use in resource-poor settings, where most corneal blind individuals reside.

METHODS

All aspects of the Boston keratoprosthesis design process were examined to determine areas of potential modification and simplification, with dual goals to reduce cost and improve the cosmetic appearance of the device in situ.

RESULTS

Minor modifications in component design simplified keratoprosthesis manufacturing. Proportional machinist time could be further reduced by adopting a single axial length for aphakic eyes, and a single back plate diameter. The cosmetic appearance was improved by changing the shape of the back plate holes from round to radial, with a petaloid appearance, and by anodization of back plate titanium to impute a more natural color.

CONCLUSIONS

We have developed a modified Boston keratoprosthesis type I, which we call the "Lucia." The Lucia retains the 2 piece design and ease of assembly of the predicate device, but would allow for manufacturing at a reduced cost. Its appearance should prove more acceptable to implanted patients. Successful keratoprosthesis outcomes require daily medications for the life of the patient and rigorous, frequent, postoperative care. Effective implementation of the device in resource-poor settings will require further innovations in eye care delivery.

Corneal regeneration: A review of stromal replacements

Corneal blindness is traditionally treated by transplantation of a donor cornea, or in severe cases by implantation of an artificial cornea or keratoprosthesis. Due to severe donor shortages and the risks of complications that come with artificial corneas, tissue engineering in ophthalmology has become more focused on regenerative strategies using biocompatible materials either with or without cells. The stroma makes up the bulk of the corneal thickness and mainly consists of a tightly interwoven network of collagen type I, making it notoriously difficult to recreate in a laboratory setting. Despite the challenges that come with corneal stromal tissue engineering, there has recently been enormous progress in this field. A large number of research groups are working towards developing the ideal biomimetic, cytocompatible and transplantable stromal replacement. Here we provide an overview of the approaches directed towards tissue engineering the corneal stroma, from classical collagen gels, films and sponges to less traditional components such as silk, fish scales, gelatin and polymers. The perfect stromal replacement has yet to be identified and future research should be directed at combined approaches, in order to not only host native stromal cells but also restore functionality.

STATEMENT OF SIGNIFICANCE

In the field of tissue engineering and regenerative medicine in ophthalmology the focus has shifted towards a common goal: to restore the corneal stroma and thereby provide a new treatment option for patients who are currently blind due to corneal opacification. Currently the waiting lists for corneal transplantation include more than 10 million patients, due to severe donor shortages. Alternatives to the transplantation of a donor cornea include the use of artificial cornea, but these are by no means biomimetic and therefore do not provide good outcomes. In recent years a lot of work has gone into the development of tissue engineered scaffolds and other biomaterials suitable to replace the native stromal tissue. Looking at all the different approaches separately is a daunting task and up until now there was no review article in which every approach is discussed. This review does include all approaches, from classical tissue engineering with collagen to the use of various alternative biomaterials and even fish scales. Therefore, this review can serve as a reference work for those starting in the field and but also to stimulate collaborative efforts in the future.

Keratoprosthesis: A Review of Recent Advances in the Field

Since its discovery in the years of the French Revolution, the field of keratoprostheses has evolved significantly. However, the path towards its present state has not always been an easy one. Initially discarded for its devastating complications, the introduction of new materials and the discovery of antibiotics in the last century gave new life to the field. Since then, the use of keratoprostheses for severe ocular surface disorders and corneal opacities has increased significantly, to the point that it has become a standard procedure for corneal specialists worldwide. Although the rate of complications has significantly been reduced, these can impede the long-term success, since some of them can be visually devastating. In an attempt to overcome these complications, researchers in the field have been recently working on improving the design of the currently available devices, by introducing the use of new materials that are more biocompatible with the eye. Here we present an update on the most recent research in the field.