Elbow loading promotes longitudinal bone growth of the ulna and the humerus

Mechanical Loading Promotes the Migration of Endogenous Stem Cells and Chondrogenic Differentiation in a Mouse Model of Osteoarthritis

Osteoarthritis (OA) is a major health problem, characterized by progressive cartilage degeneration. Previous works have shown that mechanical loading can alleviate OA symptoms by suppressing catabolic activities. This study evaluated whether mechanical loading can enhance anabolic activities by facilitating the recruitment of stem cells for chondrogenesis. We evaluated cartilage degradation in a mouse model of OA through histology with H&E and safranin O staining. We also evaluated the migration and chondrogenic ability of stem cells using in vitro assays, including immunohistochemistry, immunofluorescence, and Western blot analysis. The result showed that the OA mice that received mechanical loading exhibited resilience to cartilage damage. Compared to the OA group, mechanical loading promoted the expression of Piezo1 and the migration of stem cells was promoted via the SDF-1/CXCR4 axis. Also, the chondrogenic differentiation was enhanced by the upregulation of SOX9, a transcription factor important for chondrogenesis. Collectively, the results revealed that mechanical loading facilitated cartilage repair by promoting the migration and chondrogenic differentiation of endogenous stem cells. This study provided new insights into the loading-driven engagement of endogenous stem cells and the enhancement of anabolic responses for the treatment of OA.

Knee Loading Enhances the Migration of Adipose-Derived Stem Cells to the Osteoarthritic Sites Through the SDF-1/CXCR4 Regulatory Axis

Osteoarthritis (OA) is a whole joint disorder that is characterized by cartilage damage and abnormal remodeling of subchondral bone. Injecting adipose-derived stem cells (ASCs) into the knee joint cavity can assist in repairing osteoarthritic joints, but their ability to migrate to the damaged site is limited. Our previous studies have shown that knee loading can improve the symptoms of OA, but the effect and mechanism of knee loading on the migration of ASCs in OA remain unclear. We employed a mouse model of OA in the knee and applied knee loading (1 N at 5 Hz for 6 min/day for 2 weeks) after the intra-articular injection of ASCs. The cartilage and subchondral bone repair were assessed by histopathological analysis. Immunofluorescence assays were also used to analyze the migration of ASCs. Using cell cultures, we evaluated the migration of ASCs using the transwell migration and wound healing assays. In vivo experiments showed that knee loading promoted the migration of ASCs, increased the local SDF-1 level, and accelerated the repair of the OA-damaged sites. Mechanistically, the observed effects were blocked by the SDF-1/CXCR4 inhibitor. The in vitro results further revealed that knee loading promoted the migration of ASCs and the inhibition of SDF-1/CXCR4 significantly suppressed the beneficial loading effect. The results herein suggested that the migration of ASCs was enhanced by knee loading through the SDF-1/CXCR4 regulatory axis, and mechanical loading promoted the joint-protective effect of ASCs.

Loading-driven PI3K/Akt signaling and erythropoiesis enhanced angiogenesis and osteogenesis in a postmenopausal osteoporosis mouse model

Bone vasculature influences osteogenesis and haematopoiesis in the bone microenviroment. Mechanical loading has been shown to stimulate the formation of osteogenesis-related type H vessels in an ovariectomy (OVX)-induced osteoporosis mouse model. To determine the loading-driven mechanism of angiogenesis and the formation of type H vessels in bone, we evaluated the roles of PI3K/Akt signaling and erythropoiesis in the bone marrow. The daily application of mechanical loading (1 N at 5 Hz for 6 min/day) for 2 weeks on OVX mice inhibited osteoclast activity, associated with an increase in the number of osteoblasts and trabecular volume ratio. Mechanical loading enhanced bone vasculature and vessel formation, as well as PI3K/Akt phosphorylation and erythropoiesis in the bone marrow. Notably, LY294002, an inhibitor of PI3K signaling, blocked the tube formation by endothelial progenitor cells, as well as their migration and wound healing. The conditioned medium, derived from erythroblasts, also promoted the function of HUVECs with elevated levels of VEGF, CD31, and Emcn. Collectively, this study demonstrates that mechanical loading prevents osteoporotic bone loss by promoting angiogenesis and type H vessel formation. This load-driven preventing effect is in part mediated by PI3K/Akt signaling and erythropoiesis in the bone marrow.

Part 1. Review and meta-analysis of studies on modulation of longitudinal bone growth and growth plate activity: A macro-scale perspective

Growth modulation is an emerging method for treatment of angular skeletal deformities such as adolescent idiopathic scoliosis (AIS). The Hueter-Volkmann law, by which growth is stimulated in tension and inhibited in compression, is widely understood, and applied in current growth-modulating interventions such as anterior vertebral body tethering (AVBT) for AIS. However, without quantification of the growth rate effects of tension or compression, the possibility of under- or over- correction exists. A definitive mechanical growth modulation relationship relating to treatment of such skeletal deformities is yet to exist, and the mechanisms by which growth rate is regulated and altered are not fully defined. Review of current literature demonstrates that longitudinal (i.e., lengthwise) growth rate in multiple animal models depend on load magnitude, anatomical location, and species. Additionally, alterations in growth plate morphology and viability vary by loading parameters such as magnitude, frequency, and whether the load was applied persistently or intermittently. The aggregate findings of the reviewed studies will assist in work towards increasingly precise and clinically successful growth modulation methods. Part 1 of this review focuses on the effects of mechanical loading, species, age, and anatomical location on the macro-scale alterations in longitudinal bone growth, as well as factors that affect growth plate material properties. Part 2 considers the effects on micro-scale alterations in growth plate morphology such as zone heights and proportions, chondrocyte viability, and related gene and protein expression.

Mechanical loading stimulates bone angiogenesis through enhancing type H vessel formation and downregulating exosomal miR-214-3p from bone marrow-derived mesenchymal stem cells

Exosomes are important transporters of miRNAs, which play varying roles in the healing of the bone fracture. Angiogenesis is one of such critical events in bone healing, and we previously reported the stimulatory effect of mechanical loading in vessel remodeling. Focusing on type H vessels and exosomal miR-214-3p, this study examined the mechanism of loading-driven angiogenesis. MiRNA sequencing and qRT-PCR revealed that miR-214-3p was increased in the exosomes of the bone-losing ovariectomized (OVX) mice, while it was significantly decreased by knee loading. Furthermore, compared to the OVX group, exosomes, derived from the loading group, promoted the angiogenesis of endothelial cells. In contrast, exosomes, which were transfected with miR-214-3p, decreased the angiogenic potential. Notably, knee loading significantly improved the microvascular volume, type H vessel formation, and bone mineral density and contents, as well as BV/TV, Tb.Th, Tb.N, and Tb.Sp. In cell cultures, the overexpression of miR-214-3p in endothelial cells reduced the tube formation and cell migration. Collectively, this study demonstrates that knee loading promotes angiogenesis by enhancing the formation of type H vessels and downregulating exosomal miR-214-3p.

Knee loading repairs osteoporotic osteoarthritis by relieving abnormal remodeling of subchondral bone via Wnt/β-catenin signaling

Osteoporotic osteoarthritis (OPOA) is a common bone disease mostly in the elderly, but the relationship between Osteoporotic (OP) and osteoarthritis (OA) is complex. It has been shown that knee loading can mitigate OA symptoms. However, its effects on OPOA remain unclear. In this study, we characterized pathological linkage of OP to OA, and evaluated the effect of knee loading on OPOA. We employed two mouse models (OA and OPOA), and conducted histology, cytology, and molecular analyses. In the OA and OPOA groups, articular cartilage was degenerated and Osteoarthritis Research Society International score was increased. Subchondral bone underwent abnormal remodeling, the differentiation of bone marrow mesenchymal stem cells (BMSCs) to osteoblasts and chondrocytes was reduced, and migration and adhesion of pre-osteoclasts were enhanced. Compared to the OA group, the pathological changes of OA in the OPOA group were considerably aggravated. After knee loading, however, cartilage degradation was effectively prevented, and the abnormal remodeling of subchondral bone was significantly inhibited. The differentiation of BMSCs was also improved, and the expression of Wnt/β-catenin was elevated. Collectively, this study demonstrates that osteoporosis aggravates OA symptoms. Knee loading restores OPOA by regulating subchondral bone remodeling, and may provide an effective method for repairing OPOA.

Finite-element analysis of the mouse proximal ulna in response to elbow loading

Bone is a mechano-sensitive tissue that alters its structure and properties in response to mechanical loading. We have previously shown that application of lateral dynamic loads to a synovial joint, such as the knee and elbow, suppresses degradation of cartilage and prevents bone loss in arthritis and postmenopausal mouse models, respectively. While loading effects on pathophysiology have been reported, mechanical effects on the loaded joint are not fully understood. Because the direction of joint loading is non-axial, not commonly observed in daily activities, strain distributions in the laterally loaded joint are of great interest. Using elbow loading, we herein characterized mechanical responses in the loaded ulna focusing on the distribution of compressive strain. In response to 1-N peak-to-peak loads, which elevate bone mineral density and bone volume in the proximal ulna in vivo, we conducted finite-element analysis and evaluated strain magnitude in three loading conditions. The results revealed that strain of ~ 1000 μstrain (equivalent to 0.1% compression) or above was observed in the limited region near the loading site, indicating that the minimum effective strain for bone formation is smaller with elbow loading than axial loading. Calcein staining indicated that elbow loading increased bone formation in the regions predicted to undergo higher strain.

Wnt3a involved in the mechanical loading on improvement of bone remodeling and angiogenesis in a postmenopausal osteoporosis mouse model

Osteoporosis is a major health problem, making bones fragile and susceptible to fracture. Previous works showed that mechanical loading stimulated bone formation and accelerated fracture healing. Focusing on the role of Wnt3a (wingless/integrated 3a), this study was aimed to assess effects of mechanical loading to the spine, using ovariectomized (OVX) mice as a model of osteoporosis. Two-week daily application of this novel loading (4 N, 10 Hz, 5 min/d) altered bone remodeling with an increase in Wnt3a. Spinal loading promoted osteoblast differentiation, endothelial progenitor cell migration, and tube formation and inhibited osteoclast formation, migration, and adhesion. A transient silencing of Wnt3a altered the observed loading effects. Spinal loading significantly increased bone mineral density, bone mineral content, and bone area per tissue area. The loaded OVX group showed a significant increase in the number of osteoblasts and reduction in osteoclast surface/bone surface. Though expression of osteoblastic genes was increased, the levels of osteoclastic genes were decreased by loading. Spinal loading elevated a microvascular volume as well as VEGF expression. Collectively, this study supports the notion that Wnt3a-mediated signaling involves in the effect of spinal loading on stimulating bone formation, inhibiting bone resorption, and promoting angiogenesis in OVX mice. It also suggests that Wnt3a might be a potential therapeutic target for osteoporosis treatment.-Li, X., Liu, D., Li, J., Yang, S., Xu, J., Yokota, H., Zhang, P. Wnt3a involved in the mechanical loading on improvement of bone remodeling and angiogenesis in a postmenopausal osteoporosis mouse model.

The impact of bipedal mechanical loading history on longitudinal long bone growth

Longitudinal bone growth is accomplished through a process where proliferating chondrocytes produce cartilage in the growth plate, which ultimately ossifies. Environmental influences, like mechanical loading, can moderate the growth of this cartilage, which can alter bone length. However, little is known about how specific behaviors like bipedalism, which is characterized by a shift in body mass (mechanical load), to the lower limbs, may impact bone growth. This study uses an experimental approach to induce bipedal behaviors in a rodent model (Rattus norvegicus) over a 12-week period using a treadmill-mounted harness system to test how rat hindlimbs respond to the following loading conditions: 1) fully loaded bipedal walking, 2) partially loaded bipedal walking, 3) standing, 4) quadrupedal walking, and 5) no exercise control. These experimental conditions test whether mechanical loading from 1) locomotor or postural behaviors, and 2) a change in the magnitude of load can moderate longitudinal bone growth in the femur and tibia, relative to controls. The results demonstrate that fully loaded bipedal walking and bipedal standing groups showed significant differences in the percentage change in length for the tibia and femur. When comparing the change from baseline, which control for body mass, all bipedal groups showed significant differences in tibia length compared to control groups. However, there were no absolute differences in bone length, which suggests that mechanical loads from bipedal behaviors may instead be moderating changes in growth velocity. Implications for the relationship between bipedal behaviors and longitudinal bone growth are discussed.

Bone Lengthening in the Pediatric Upper Extremity

➤Bone lengthening has been used successfully for several congenital and acquired conditions in the pediatric clavicle, humerus, radius, ulna, and phalanges.➤Common indications for bone lengthening include achondroplasia, radial longitudinal deficiency, multiple hereditary exostosis, brachymetacarpia, symbrachydactyly, and posttraumatic and postinfectious growth arrest.➤Most authors prefer distraction rates of <1 mm/day for each bone in the upper extremity except the humerus, which can safely be lengthened by 1 mm/day.➤Most authors define success by the amount of radiographic bone lengthening, joint motion after lengthening, and subjective patient satisfaction rather than validated patient-related outcome measures.➤Bone lengthening of the upper extremity is associated with a high complication rate, with complications including pin-track infections, fixation device failure, nerve lesions, nonunion, fracture of regenerate bone, and joint dislocations.

Knee loading protects against osteonecrosis of the femoral head by enhancing vessel remodeling and bone healing

Osteonecrosis of the femoral head is a serious orthopedic problem. Moderate loads with knee loading promote bone formation, but their effects on osteonecrosis have not been investigated. Using a rat model, we examined a hypothesis that knee loading enhances vessel remodeling and bone healing through the modulation of the fate of bone marrow-derived cells. In this study, osteonecrosis was induced by transecting the ligamentum teres followed by a tight ligature around the femoral neck. For knee loading, 5 N loads were laterally applied to the knee at 15 Hz for 5 min/day for 5 weeks. Changes in bone mineral density (BMD) and bone mineral content (BMC) of the femur were measured by pDEXA, and ink infusion was performed to evaluate vessel remodeling. Femoral heads were harvested for histomorphometry, and bone marrow-derived cells were isolated to examine osteoclast development and osteoblast differentiation. The results showed that osteonecrosis significantly induced bone loss, and knee loading stimulated both vessel remodeling and bone healing. The osteonecrosis group exhibited the lowest trabecular BV/TV (p b 0.001) in the femoral head, and lowest femoral BMD and BMC (both p b 0.01). However, knee loading increased trabecular BV/TV (p b 0.05) as well as BMD (pb 0.05) and BMC (p b 0.01). Osteonecrosis decreased the vessel volume (pb 0.001), vessel number (pb 0.001) and VEGF expression (p b 0.01), and knee loading increased them (pb 0.001, pb 0.001 and p b 0.01). Osteonecrosis activated osteoclast development, and knee loading reduced its formation, migration, adhesion and the level of “pit” formation (pb 0.001, pb 0.01, pb 0.001 and pb 0.001). Furthermore, knee loading significantly increased osteoblast differentiation and CFU-F (both p b 0.001). A significantly positive correlation was observed between vessel remodeling and bone healing (both p b 0.01). These results indicate that knee loading could be effective in repair osteonecrosis of the femoral head in a rat model. This effect might be attributed to promoting vessel remodeling, suppressing osteoclast development, and increasing osteoblast and fibroblast differentiation. In summary, the current study suggests that knee loading might potentially be employed as a non-invasive therapy for osteonecrosis of the femoral head.

Role of Osteocyte-derived Insulin-Like Growth Factor I in Developmental Growth, Modeling, Remodeling, and Regeneration of the Bone

The osteocyte has long been considered to be the primary mechanosensory cell in the bone. Recent evidence has emerged that the osteocyte is also a key regulator of various bone and mineral metabolism and that its regulatory effects are in part mediated through locally produced osteocyte-derived factors, such as sclerostin, receptor activator of nuclear factor-kappa B ligand (RANKL), and fibroblast growth factor (FGF)-23. Osteocytes secrete large amounts of insulin-like growth factor (IGF)-I in bone. Although IGF-I produced locally by other bone cells, such as osteoblasts and chondrocytes, has been shown to play important regulatory roles in bone turnover and developmental bone growth, the functional role of osteocyte-derived IGF-I in the bone and mineral metabolism has not been investigated and remains unclear. However, results of recent studies in osteocyte Igf1 conditional knockout transgenic mice have suggested potential regulatory roles of osteocyte-derived IGF-I in various aspects of bone and mineral metabolism. In this review, evidence supporting a regulatory role for osteocyte-derived IGF-I in the osteogenic response to mechanical loading, the developmental bone growth, the bone response to dietary calcium depletion and repletion, and in fracture repair is discussed. A potential coordinated regulatory relationship between the effect of osteocyte-derived IGF-I on bone size and the internal organ size is also proposed.

Disruption of the insulin-like growth factor-1 gene in osteocytes impairs developmental bone growth in mice

This study evaluated the role of osteocyte-derived insulin-like growth factor 1 (IGF-1) in developmental bone growth by assessing the bone phenotype of osteocyte Igf1 conditional knockout (KO) mice, generated by crossing the Dmp1-driven Cre-expressing transgenic mice with Igf1 floxed mice containing loxP sites that flank exon 4 of the Igf1 gene. The periosteal diameter of femurs of homozygous conditional KO mutants was 8-12% smaller than wild-type (WT) littermates. The conditional mutants had 14-20%, 10-21%, and 15-31% reduction in total, trabecular, and cortical bone mineral contents, respectively. However, there were no differences in the total, trabecular, or cortical bone mineral densities, or in trabecular bone volume, thickness, number, and separation at secondary spongiosa between the mutants and WT littermates. The conditional KO mutants showed reduction in dynamic bone formation parameters at both periosteal and endosteal surfaces at the mid-diaphysis and in trabecular bone formation rate and resorption parameters at secondary spongiosa. The lower plasma levels of PINP and CTx in conditional KO mice support a regulatory role of osteocyte-derived IGF-1 in the bone turnover. The femur length of conditional KO mutants was 4-7% shorter due to significant reduction in the length of growth plate and hypertropic zone. The effect on periosteal expansion appeared to be bigger than that on longitudinal bone growth. The conditional KO mice had 14% thinner calvaria than WT littermates, suggesting that deficient osteocyte IGF-1 production also impairs developmental growth of intramembraneous bone. Conditional disruption of Igf1 in osteocytes did not alter plasma levels of IGF-1, calcium, or phosphorus. In summary, this study shows for the first time that osteocyte-derived IGF-1 plays an essential role in regulating bone turnover during developmental bone growth.

Moderate joint loading reduces degenerative actions of matrix metalloproteinases in the articular cartilage of mouse ulnae

Joint loading is a recently developed loading modality, which can enhance bone formation and accelerate healing of bone fracture. Since mechanical stimulation alters expression of matrix metalloproteinases (MMPs) in chondrocytes, a question addressed herein was, does joint loading alter actions of MMPs in the articular cartilage? We hypothesized that expression and activity of MMPs are regulated in a load-intensity-dependent manner and that moderate load scan downregulates MMPs. To test this hypothesis, a mouse elbow-loading model was employed. In the articular cartilage of an ulna, the mRNA levels of a group of MMPs as well as their degenerative activities were determined. The result revealed that elbow loading altered the expression and activities of MMPs depending on its loading intensity. Collectively, the data in this study indicate that 0.2 and 0.5 N joint loading significantly reduced the expression of multiple MMPs, that is, MMP-1, MMP-3, MMP-8, and MMP-13, and overall activities of collagenases or gelatinases in articular cartilage, while higher loads increased the expression and activity of MMP-1 and MMP-13. Furthermore, moderate loads at 1 N elevated the mRNA level of CBP/p300-interacting transactivator with ED-rich tail 2 (CITED2), but higher loads at 4 N did not induce a detectable amount of CITED2 mRNA. Since CITED2 is known to mediate the downregulation of MMP-1 and MMP-13, the result indicates that joint loading at moderate intensity reduces MMP activities through potential induction of CITED2. MMPs such as MMP-1 and MMP-13 are predominant collagenases in the pathology of osteoarthritis. Therefore, joint loading could offer an interventional regimen for maintenance of joint tissues.