Theoretical investigation of the first-shell mechanism of acetylene hydration catalyzed by a biomimetic tungsten complex

Isolation and characterization of a bis(dithiolene)-supported tungsten-acetylenic complex as a model for acetylene hydratase

Acetylene hydratase is currently the only known mononuclear tungstoenzyme that does not catalyze a net redox reaction. The conversion of acetylene to acetaldehyde is proposed to occur at a W(IV) active site through first-sphere coordination of the acetylene substrate. To date, a handful of tungsten complexes have been shown to bind acetylene, but many lack the bis(dithiolene) motif of the native enzyme. The model compound, [W(O)(mnt)2]2-, where mnt2- is 1,2-dicyano-1,2-dithiolate, was previously reported to bind an electrophilic acetylene substrate, dimethyl acetylenedicarboxylate, and characterized by FT-IR, UV-vis, potentiometry, and mass spectrometry (Yadav, J; Das, S. K.; Sarkar, S., J. Am. Chem. Soc., 1997, 119, 4316-4317). By slightly changing the electrophilic acetylene substrate, an acetylenic-bis(dithiolene)‑tungsten(IV) complex has been isolated and characterized by FT-IR, UV-vis, NMR, X-ray diffraction, and X-ray absorption spectroscopy. Activation parameters for complex formation were also determined and suggest coordination-sphere reorganization is a limiting factor in the model complex reactivity.

An essential role for tungsten in the ecology and evolution of a previously uncultivated lineage of anaerobic, thermophilic Archaea

Trace metals have been an important ingredient for life throughout Earth's history. Here, we describe the genome-guided cultivation of a member of the elusive archaeal lineage Caldarchaeales (syn. Aigarchaeota), Wolframiiraptor gerlachensis, and its growth dependence on tungsten. A metagenome-assembled genome (MAG) of W. gerlachensis encodes putative tungsten membrane transport systems, as well as pathways for anaerobic oxidation of sugars probably mediated by tungsten-dependent ferredoxin oxidoreductases that are expressed during growth. Catalyzed reporter deposition-fluorescence in-situ hybridization (CARD-FISH) and nanoscale secondary ion mass spectrometry (nanoSIMS) show that W. gerlachensis preferentially assimilates xylose. Phylogenetic analyses of 78 high-quality Wolframiiraptoraceae MAGs from terrestrial and marine hydrothermal systems suggest that tungsten-associated enzymes were present in the last common ancestor of extant Wolframiiraptoraceae. Our observations imply a crucial role for tungsten-dependent metabolism in the origin and evolution of this lineage, and hint at a relic metabolic dependence on this trace metal in early anaerobic thermophiles.

Inspired by Nature-Functional Analogues of Molybdenum and Tungsten-Dependent Oxidoreductases

Throughout the previous ten years many scientists took inspiration from natural molybdenum and tungsten-dependent oxidoreductases to build functional active site analogues. These studies not only led to an ever more detailed mechanistic understanding of the biological template, but also paved the way to atypical selectivity and activity, such as catalytic hydrogen evolution. This review is aimed at representing the last decade’s progress in the research of and with molybdenum and tungsten functional model compounds. The portrayed systems, organized according to their ability to facilitate typical and artificial enzyme reactions, comprise complexes with non-innocent dithiolene ligands, resembling molybdopterin, as well as entirely non-natural nitrogen, oxygen, and/or sulfur bearing chelating donor ligands. All model compounds receive individual attention, highlighting the specific novelty that each provides for our understanding of the enzymatic mechanisms, such as oxygen atom transfer and proton-coupled electron transfer, or that each presents for exploiting new and useful catalytic capability. Overall, a shift in the application of these model compounds towards uncommon reactions is noted, the latter are comprehensively discussed.

Soft Scorpionate Hydridotris(2-mercapto-1-methylimidazolyl) borate) Tungsten-Oxido and -Sulfido Complexes as Acetylene Hydratase Models

A series of WIV alkyne complexes with the sulfur-rich ligand hydridotris(2-mercapto-1-methylimidazolyl) borate) (TmMe ) are presented as bio-inspired models to elucidate the mechanism of the tungstoenzyme acetylene hydratase (AH). The mono- and/or bis-alkyne precursors were reacted with NaTmMe and the resulting complexes [W(CO)(C2 R2 )(TmMe )Br] (R=H 1, Me 2) oxidized to the target [WE(C2 R2 )(TmMe )Br] (E=O, R=H 4, Me 5; E=S, R=H 6, Me 7) using pyridine-N-oxide and methylthiirane. Halide abstraction with TlOTf in MeCN gave the cationic complexes [WE(C2 R2 )(MeCN)(TmMe )](OTf) (E=CO, R=H 10, Me 11; E=O, R=H 12, Me 13; E=S, R=H 14, Me 15). Without MeCN, dinuclear complexes [W2 O(μ-O)(C2 Me2 )2 (TmMe )2 ](OTf)2 (8) and [W2 (μ-S)2 (C2 Me2 )(TmMe )2 ](OTf)2 (9) could be isolated showing distinct differences between the oxido and sulfido system with the latter exhibiting only one molecule of C2 Me2 . This provides evidence that a fine balance of the softness at W is important for acetylene coordination. Upon dissolving complex 8 in acetonitrile complex 13 is reconstituted in contrast to 9. All complexes exhibit the desired stability toward water and the observed effective coordination of the scorpionate ligand avoids decomposition to disulfide, an often-occurring reaction in sulfur ligand chemistry. Hence, the data presented here point toward a mechanism with a direct coordination of acetylene in the active site and provide the basis for further model chemistry for acetylene hydratase.

Bioinspired Tungsten Complexes Employing a Thioether Scorpionate Ligand

The synthesis and characterization of a series of novel tungsten complexes employing the bioinspired, sulfur-rich scorpionate ligand [PhTt] (phenyltris((methylthio)methyl)borate) are reported. Starting from the previously published tungsten precursor [WBr₂(CO)₃(NCMe)₂], a salt metathesis reaction with 1 equiv of Cs[PhTt] led to the desired complex [WBr(CO)₃(PhTt)] (1), making it the first tungsten complex employing a poly(thioether)borate ligand. Surprisingly, the reaction of [WBr₂(CO)₃(NCMe)₂] with an excess of the ligand gave complex [W(CO)₂(η²-CH₂SMe)(PhTt)] (2) with a bidentate (methylthio)methanide ligand as the major product. Thereby, phenyldi((methylthio)methyl)borane is formed, which was isolated and characterized by NMR spectroscopy. The bromido ligand in [WBr(CO)₃(PhTt)] was further substituted by the S,N-bidentate methimazole in order to make the first coordination sphere more sulfur-rich forming [W(CO)₂(mt)(PhTt)] (3). Alkyne tungsten complexes employing the sulfur-rich scorpionate ligand were accessible by reaction of [WBr₂(CO)(C₂R₂)₂(NCMe)] (R = Me, Ph) with Cs[PhTt] forming [WBr(CO)(C₂R₂)₂(PhTt- S, S')] (R = Me 4, Ph 5), with the potentially tridentate ligand coordinated only via two sulfur atoms. In the case of 4, the higher flexibility of the bidentate coordination leads to the formation of two isomers with respect to the six-membered ring formed by the tungsten center and the two coordinated sulfur atoms of the ligand. All complexes 1-5 were characterized by single-crystal X-ray diffraction analysis.

Activation and Photoinduced Release of Alkynes on a Biomimetic Tungsten Center: The Photochemical Behavior of the W-S-Phoz System

The synthesis and structural determination of four tungsten alkyne complexes coordinated by the bio-inspired S,N-donor ligand 2-(4',4'-dimethyloxazoline-2'-yl)thiophenolate (S-Phoz) is presented. A previously established protocol that involved the reaction of the respective alkyne with the bis-carbonyl precursor [W(CO)2 (S-Phoz)2 ] was used for the complexes [W(CO)(C2 R2 )(S-Phoz)2 ] (R=H, 1 a; Me, 1 b; Ph, 1 c). Oxidation with pyridine-N-oxide gave the corresponding W-oxo species [WO(C2 R2 )(S-Phoz)2 ] (R=H, 2 a; Me, 2 b; Ph, 2 c). All W-oxo-alkyne complexes (2 a, b, c) were found to be capable of alkyne release upon light irradiation to afford five-coordinate [WO(S-Phoz)2 ] (3). The photoinduced release of the alkyne ligand was studied in detail by in situ 1 H NMR measurements, which revealed correlation of the photodissociation rate constant (2 b>2 a>2 c) with the elongation of the alkyne C≡C bond in the molecular structures. Oxidation of [WO(S-Phoz)2 ] (3) with pyridine-N-oxide yielded [WO2 (S-Phoz)2 ] (4), which shows highly fluxional behavior in solution. Variable-temperature 1 H NMR spectroscopy revealed three isomeric forms with respect to the ligand arrangement versus each other. Furthermore, compound 4 rearranges to tetranuclear oxo compound [W4 O4 (μ-O)6 (S-Phoz)4 ] (5) and dinuclear [{WO(μ-O)(S-Phoz)}2 ] (6) over time. The latter two were identified by single-crystal X-ray diffraction analyses.

Is the tungsten(IV) complex (NEt4)2[WO(mnt)2] a functional analogue of acetylene hydratase?

The tungsten(IV) complex (Et₄N)₂[W(O)(mnt)₂] (1; mnt = maleonitriledithiolate) was proposed (Sarkar et al., J. Am. Chem. Soc.1997, 119, 4315) to be a functional analogue of the active center of the enzyme acetylene hydratase from Pelobacter acetylenicus, which hydrates acetylene (ethyne; 2) to acetaldehyde (ethanal; 3). In the absence of a satisfactory mechanistic proposal for the hydration reaction, we considered the possibility of a metal–vinylidene type activation mode, as it is well established for ruthenium-based alkyne hydration catalysts with anti-Markovnikov regioselectivity. To validate the hypothesis, the regioselectivity of tungsten-catalyzed alkyne hydration of a terminal, higher alkyne had to be determined. However, complex 1 was not a competent catalyst for the hydration of 1-octyne under the conditions tested. Furthermore, we could not observe the earlier reported hydration activity of complex 1 towards acetylene. A critical assessment of, and a possible explanation for the earlier reported results are offered. The title question is answered with "no".

Acetylene hydratase: a non-redox enzyme with tungsten and iron-sulfur centers at the active site

In living systems, tungsten is exclusively found in microbial enzymes coordinated by the pyranopterin cofactor, with additional metal coordination provided by oxygen and/or sulfur, and/or selenium atoms in diverse arrangements. Prominent examples are formate dehydrogenase, formylmethanofuran dehydrogenase, and aldehyde oxidoreductase all of which catalyze redox reactions. The bacterial enzyme acetylene hydratase (AH) stands out of its class as it catalyzes the conversion of acetylene to acetaldehyde, clearly a non-redox reaction and a reaction distinct from the reduction of acetylene to ethylene by nitrogenase. AH harbors two pyranopterins bound to W, and a [4Fe-4S] cluster. W is coordinated by four dithiolene sulfur atoms, one cysteine sulfur, and one oxygen ligand. AH activity requires a strong reductant suggesting W(IV) as the active oxidation state. Two different types of reaction pathways have been proposed. The 1.26 Å structure reveals a water molecule coordinated to W which could gain a partially positive net charge by the adjacent protonated Asp-13, enabling a direct attack of C2H2. To access the W-Asp site, a substrate channel was evolved distant from where it is found in other members of the DMSOR family. Computational studies of this second shell mechanism led to unrealistically high energy barriers, and alternative pathways were proposed where C2H2 binds directly to W. The architecture of the catalytic cavity, the specificity for C2H2 and the results from site-directed mutagenesis do not support this first shell mechanism. More investigations including structural information on the binding of C2H2 are needed to present a conclusive answer.

Towards Structural-Functional Mimics of Acetylene Hydratase: Reversible Activation of Acetylene using a Biomimetic Tungsten Complex

The synthesis and characterization of a biomimetic system that can reversibly bind acetylene (ethyne) is reported. The system has been designed to mimic catalytic intermediates of the tungstoenzyme acetylene hydratase. The thiophenyloxazoline ligand S-Phoz (2-(4',4'-dimethyloxazolin-2'-yl)thiophenolate) is used to generate a bioinspired donor environment around the W center, facilitating the stabilization of W-acetylene adducts. The featured complexes [W(C2 H2 )(CO)(S-Phoz)2 ] (2) and [WO(C2 H2 )(S-Phoz)2 ] (3) are extremely rare from a synthetic and structural point of view as very little is known about W-C2 H2 adducts. Upon exposure to visible light, 3 can release C2 H2 from its coordination sphere to yield the 14-electron species [WO(S-Phoz)2 ] (4). Under light-exclusion 4 re-activates C2 H2 making this the first fully characterized system for the reversible activation of acetylene.

Structural and functional models in molybdenum and tungsten bioinorganic chemistry: description of selected model complexes, present scenario and possible future scopes

A brief description about some selected model complexes in molybdenum and tungsten bioinorganic chemistry is provided. The synthetic strategies involved and their limitations are discussed. Current status of molybdenum and tungsten bioinorganic modeling chemistry is presented briefly and synthetic problems associated therein are analyzed. Possible future directions which may expand the scope of modeling chemistry are suggested.

Why is the molybdenum-substituted tungsten-dependent formaldehyde ferredoxin oxidoreductase not active? A quantum chemical study

Formaldehyde ferredoxin oxidoreductase is a tungsten-dependent enzyme that catalyzes the oxidative degradation of formaldehyde to formic acid. The molybdenum ion can be incorporated into the active site to displace the tungsten ion, but is without activity. Density functional calculations have been employed to understand the incapacitation of the enzyme caused by molybdenum substitution. The calculations show that the enzyme with molybdenum (Mo-FOR) has higher redox potential than that with tungsten, which makes the formation of the Mo(VI)=O complex endothermic by 14 kcal/mol. Following our previously suggested mechanism for this enzyme, the formaldehyde substrate oxidation was also investigated for Mo-FOR using the same quantum-mechanics-only model, except for the displacement of tungsten by molybdenum. The calculations demonstrate that formaldehyde oxidation occurs via a sequential two-step mechanism. Similarly to the tungsten-catalyzed reaction, the Mo(VI)=O species performs the nucleophilic attack on the formaldehyde carbon, followed by proton transfer in concert with two-electron reduction of the metal center. The first step is rate-limiting, with a total barrier of 28.2 kcal/mol. The higher barrier is mainly due to the large energy penalty for the formation of the Mo(VI)=O species.

The prokaryotic Mo/W-bisPGD enzymes family: a catalytic workhorse in bioenergetic

Over the past two decades, prominent importance of molybdenum-containing enzymes in prokaryotes has been put forward by studies originating from different fields. Proteomic or bioinformatic studies underpinned that the list of molybdenum-containing enzymes is far from being complete with to date, more than fifty different enzymes involved in the biogeochemical nitrogen, carbon and sulfur cycles. In particular, the vast majority of prokaryotic molybdenum-containing enzymes belong to the so-called dimethylsulfoxide reductase family. Despite its extraordinary diversity, this family is characterized by the presence of a Mo/W-bis(pyranopterin guanosine dinucleotide) cofactor at the active site. This review highlights what has been learned about the properties of the catalytic site, the modular variation of the structural organization of these enzymes, and their interplay with the isoprenoid quinones. In the last part, this review provides an integrated view of how these enzymes contribute to the bioenergetics of prokaryotes. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.