Restorative material and loading type influence on the biomechanical behavior of wedge shaped cervical lesions

Three-dimensional finite element analysis of the impact of access cavity preparation on first molar fracture resistance: A scoping review

Access cavity preparation represents the initial step in root canal treatment. Minimally invasive approaches have gained increasing attention and involve advancements in the traditional access cavity preparation. Simultaneously, the development of three-dimensional finite element analysis (3D-FEA) has provided a theoretical foundation for evaluating the merits and drawbacks of various access cavity preparations. Studies using static loading 3D-FEA have suggested that conservative access cavity preparation reduces the concentration of stress in the cervical region, thereby strengthening fracture resistance. However, the lack of support from clinical data raises concerns about the validity of this suggestion. Conversely, studies involving cyclic loading 3D-FEA and dynamic loading 3D-FEA have challenged the prevailing perspectives by taking into account additional factors such as filling materials, thus providing a more comprehensive understanding of the impact of access cavity preparation on fracture resistance. Existing research lacks a comprehensive comparison of the different 3D-FEA methods, and this review fills this gap by providing a systematic assessment of different 3D-FEA methods and their applications in access cavity preparation.

Investigating the etiology of non-carious cervical lesions: Novel µCT analysis

OBJECTIVES

The etiology of non-carious cervical lesions (NCCLs) is not fully understood, limiting treatment and prevention. Our aim was to evaluate the effect of mechanical loading and acid exposure on the cervical tooth region using a random spectrum loading model that simulates the nature of oral mastication.

METHODS

Thirty extracted human premolars were divided into three experimental groups: 1) unloaded teeth immersed in acid (erosion group: Er), 2) loaded teeth immersed in acid (erosion with spectrum loading group: Er-SL), and 3) loaded teeth immersed in distilled water (spectrum loading group: SL). Random spectrum loading with loads ranging from 100 to 500 N was performed. All teeth were scanned using micro-CT. A novel 3D analysis was developed to evaluate the circumferential cervical tissue loss and regions under tension and compression. For parametric and non-parametric comparisons, one-way ANOVA with Tukey post-hoc tests and Kruskal-Wallis with Bonferroni post-hoc tests were used.

RESULTS

A significant difference was observed in the circumferential volumetric loss, with the Er-SL exhibiting the greatest volume loss (p < 0.001). Moreover, in the loaded groups (Er-SL and SL), regions subjected to tension showed significantly greater loss (p < 0.001, p = 0.007) compared with regions subjected to compression.

CONCLUSIONS

The novel high-resolution micro-CT analysis provided new insights into the etiology of NCCLs. The results suggested that the cumulative effect of mechanical loading and acid exposure may play a major role in NCCL formation.

CLINICAL SIGNIFICANCE

This study investigates the etiology of NCCLs by examining the combined effects of occlusal loads and acid exposure on cervical tissue loss. Understanding the pathogenesis of NCCLs paves the way for the development of improved preventative measures and treatment strategies to prevent tooth structure degradation.

Influence of carbonated acid beverage on fracture resistance and marginal gap formation in different restorative approaches to non-carious cervical lesions

OBJECTIVE

This study is to evaluate fracture resistance, failure mode, and gap formation at the restorative interface of unrestored or restored non-carious cervical lesions (NCCLs) submitted to a short-term erosive environment.

MATERIALS AND METHODS

Artificial NCCLs were produced in vitro in bovine incisors, and were randomly divided into four restorative resins groups (n = 22): nanohybrid-NR; bulk-fill-BR; flow with a nanohybrid layer-FNR; bulk-fill with a nanohybrid layer-BNR; and a group unrestored-UR (n = 16). Half of the specimens were submitted to an erosive challenge (per 5 min, 3 × a day for 7 days, before and after restoration), and the other half, was immersed in artificial saliva. After, all teeth undergone thermal (5 ºC, 37 ºC, and 55 ºC, 3600 cycles) and mechanical (50 N, 2 Hz, 300,000 cycles) aging. Eighty teeth were subjected to compressive loading, and resistance and failures were analyzed, while 24 teeth were evaluated for gaps by microcomputed tomography. Statistical tests were performed (p < 0.05).

RESULTS

The restorative approaches affected fracture resistance (η2p = 0.14, p = 0.023), and gap formation (η2 = 0.18, p = 0.012) and so did the immersion medium (fracture η2p = 0.09, p = 0.008; gap η2 = 0.09, p = 0.017). BNR showed the highest resistance, while UR the lowest. FNR showed the highest gaps in both immersion media. Neither the resin groups nor the immersion media were associated with failure mode.

CONCLUSIONS

The erosive immersion medium based in acid beverages has been shown to affect NCCLs with or without restoration, but when Bulk-Fill resin is covered by nanohybrid resin, the performance is good.

CLINICAL RELEVANCE

Erosion negatively affects restorations, but unrestored NCCL shows worse biomechanical performance in stress-bearing situations.

Resin Composites in Posterior Teeth: Clinical Performance and Direct Restorative Techniques

Resin composites are the most versatile restorative materials used in dentistry and the first choice for restoring posterior teeth. This article reviews aspects that influence the clinical performance of composite restorations and addresses clinically relevant issues regarding different direct techniques for restoring posterior teeth that could be performed in varied clinical situations. The article discusses the results of long-term clinical trials with resin composites and the materials available in the market for posterior restorations. The importance of photoactivation is presented, including aspects concerning the improvement of the efficiency of light-curing procedures. With regard to the restorative techniques, the article addresses key elements and occlusion levels for restoring Class I and Class II cavities, in addition to restorative strategies using different shades/opacities of resin composites in incremental techniques, restorations using bulk-fill composites, and shade-matching composites.

The Restored Premolars Biomechanical Behavior: FEM and Experimental Moiré Analyses

This study applied the finite element method (FEM) and the moiré strip projection method to evaluate the biomechanical behavior of healthy and endodontic-treated premolar teeth. The finite element method and the moiré strip projection method were applied to evaluate the influence of restored materials in association with cervical lesions and were considered as strain estimates for a tooth sample with 21 units, under loads of 25, 50, 75, and 100 N, frontal and oblique applied. The focused cases were: tooth H healthy; tooth A-MOD amalgam; tooth AL-MOD amalgam + lesion; tooth ALR-MOD amalgam + injury restored; tooth R-MOD resin; tooth RL-MOD resin + lesion; tooth RLR-MOD resin + injury restored. The results obtained by FEM simulation can be considered perfectly validated by the results presented by the experimental moiré projection analysis, demonstrating that the FEM numerical analysis can be used to evaluate the biomechanical behavior of healthy and endodontically treated teeth. Developing an alternative protocol to generate FEM three-dimensional models will lead to a ready and inexpensive tool since there is no need for costly equipment for tooth extraction prognosis.

Composite vs. ionomer vs. mixed restoration of wedge-shaped dental cervical lesions: Marginal quality relative to eccentric occlusal loading

Dental cervical restorations may be impacted by resultants of occlusal loads that may have already contributed to the development of the lesion and should rely on materials' favorable properties to bear the stresses. The marginal quality of cervical restorations made with materials of different moduli of elasticity in essence, isolated, or in combination, was evaluated relative to eccentric occlusal loading. Cervical wedge-shaped cavities, prepared in extracted premolars, were restored with a composite resin (CR), a restorative ionomer (GIC), or the composite in combination with a lining ionomer (Mixed restoration: M). Half of the teeth in each group were subjected to eccentric occlusal loading (eol; 150 N / 10⁶ cycles / 2.5 Hz; CReol / GICeol / Meol, n = 10), and the others were stored in 37 °C distilled water (Control: c; CRc / GICc / Mc, n = 10). A fluorescein-modified adhesive favored delimitation of formed gaps, which were evaluated by confocal laser scanning microscopy regarding their presence, location related to the cavity walls, and width and depth (µm), at a 5% significance level. From a comprehensive perspective, neither the loading nor the materials were significantly associated with the qualitative response variables or exerted any influence over the quantitative variables. More specifically, the use of the different materials was significantly associated with the frequency of gaps exclusively when loading was applied (Chi-square test, p = 0.029, CR > M > GIC). Though the marginal quality of cervical restorations may not be influenced by eccentric occlusal loading or the use of different materials, even in association in general, the unfavorable aspects of the use of the composite may be relevant, particularly in face of the existence of eccentric occlusal loads.