Longevity of composite build-ups without posts-10-year results of a practice-based study

Clinical behavior and survival of endodontically treated teeth with or without post placement: a systematic review and meta-analysis

PURPOSE

Non-vital teeth usually exhibit substantial loss of coronal and radicular tooth structure, and use of posts after root canal treatment is controversial. This review examined whether placement of posts influences clinical behavior and survival probability of endodontically treated teeth (ETT).

METHODS

An electronic search, without time restrictions, for publications written in English was undertaken in PubMed, Scopus, and Web of Science. Terms related to four main components (endodontically treated teeth, fixed prosthesis, post restoration, and survival rate) were used for the database search strategies.

RESULTS

57 studies met the inclusion criteria and were included in the qualitative analysis. Of the publications chosen for qualitative analysis, 17 clinical studies (11 prospective and 6 retrospective studies) were found to be suitable for quantitative analysis. These studies included 7,278 patients (7,330 ETT), with a mean age ± standard deviation (SD) of 45.46 ± 12.1 years. There was a statistically significant difference in survival rate between ETT with or without posts (P < 0.001).

CONCLUSION

As compared with teeth with no posts, post placement on ETT may improve clinical performance and survival probability of endodontically treated teeth.

Longevity and risk factors of CAD-CAM manufactured implant-supported all-ceramic crowns - A prospective, multi-center, practice-based cohort study

OBJECTIVES

The aim of this prospective, multi-center, practice-based cohort study was to analyze factors associated with the success of implant supported all-ceramic single-unit crowns, made by computer-aided-design/computer-aided-manufacturing (CAD-CAM).

METHODS

All-ceramic crowns placed in a private practice-based research network (Ceramic Success Analysis, AG Keramik) were analyzed. Data from 567patients with CAD-CAM implant supported all-ceramic crowns placed between 2008-2023 by 54dentists were evaluated. Firstly, all crowns with at least one follow-up control were included (n = 907). Secondly, all crowns being followed up for ≥ 5years and all failures were included (n = 151). At the latest follow-up visit, crowns were considered as successful (not failed) if they were still in function without the need for additional therapy. Multi-level Cox proportional hazards models were used to evaluate the association between a range of predictors and time of success.

RESULTS

Within a mean follow-up period (SD) of 2.5 (2)years (first scenario) and 6.2 (1.2)years (second scenario) [maximum:12years], 27crowns failed (annual failure rate [AFR]:0.74 %). The main failure types were decementation, (n = 11), fracture of the ceramic (n = 4) or Ti-Base (n = 4). In 5-year-scenario, crowns fabricated in the laboratory had 26times lower failure rate than those fabricated chairside (95 %CI:0.0-0.7;p = 0.038). Furthermore, the use of a silane (HR:0.051;95 %CI:0.0-0.5;p = 0.014) and etching of the ceramic (HR:0.053;95 %CI:0.0-0.8;p = 0.035) resulted in a significantly higher risk for failure than their non-use.

SIGNIFICANCE

For CAD-CAM manufactured implant supported all-ceramic crowns, high success rates were found in up to 12-year evaluation. Furthermore, after 5years, no patient-or implant-level factors, but operative-level factor (i.e.fabrication method, use of silane/etching) were significantly associated with failure. The study was registered in the German Clinical Trials Register (DRKS-ID: DRKS00020271).

Advanced Material Strategy for Restoring Damaged Endodontically Treated Teeth: A Comprehensive Review

The restoration of endodontically treated teeth (ETT) remains a significant challenge in modern dentistry. These teeth often suffer from substantial structural damage due to both the original pathology and the invasive nature of endodontic procedures. Consequently, ETT are more susceptible to fractures compared to vital teeth, necessitating restorative strategies that can effectively restore both function and aesthetics while minimizing the risk of failure. In recent years, advances in adhesive dentistry and the development of high-strength ceramics have further expanded the restorative options for ETT. Bonded restorations have gained popularity as they preserve more tooth structure and enhance the overall strenght of the tooth-restoration complex. The choice of restorative material and technique is influenced by numerous factors, including the amount of remaining tooth structure, the functional requirements of the tooth, and the aesthetic demands of the patient. Despite the plethora of available materials and techniques, the optimal approach to restoring ETT remains a topic of ongoing research and debate. In this comprehensive review, the current state of and recent advances in restoring damaged endodontically treated teeth are explored. Numerous therapeutic options exist, involving a wide range of materials. This article aims to present the biomaterial advancements of the past decade and their applications, offering alternative approaches to treating damaged ETT with the goal of prolonging their retention on the dental arch and serving as a valuable resource for dental practitioners who face this issue daily.

Success and complication rates of non-precious alloy telescopic crowns in a general dental practice

OBJECTIVES

This retrospective, single-center, practice-based cohort study aimed to analyze factors associated with the success of removable partial dentures retained by telescopic crowns (TRPD).

MATERIALS AND METHODS

TRPD which were placed in a single practice of a practice-based research network were analyzed. Data from 139 patients (age (SD): 66 (11) years; 66 female) with 174 TRPD including 488 non-precious alloy telescopic crowns (TC) between 2004 and 2016 were included. TC without any technical complication were considered as successful, and as survived, if they were still in function at the last check-up. Multilevel Cox proportional hazard models were used to evaluate the association between clinical factors and time until failure.

RESULTS

Within a mean follow-up period (SD) of 4.2 (3.3) years (min-max: 1 day-12 years), 372 (76%) TC (AFR5years,TC-level: 5.0%) as well as 136 (87%) TRPD (AFR5years,TRPD-level: 5.1%) ("worst-case scenario") and 150 (86%) TRPD (AFR5years,TRPD-level: 3.4%) ("best-case scenario") were considered as successful. The main failure types were recementation (n = 39), endodontic treatment (n = 36), and extraction (n = 35). TC in male patients showed 1.6 times higher risk for failure than in female patients (95%CI: 1.1-2.4; p = 0.023). TC on premolars showed 2.2 times higher risk for failure than on incisors (95%CI: 1.1-5.0; p = 0.023) and TC in dentures with ≤ 3TC showed 2.1 times higher risk for failure than TC in dentures with > 3TC (1.3-3.4; p = 0.042). Furthermore, TC on the most distal tooth in an arch showed 2.4 times higher risk for failure than TC on a more mesial tooth (1.5-3.8; p < 0.001).

CONCLUSION

For removable partial dentures retained by telescopic crowns, high success rates could be found after up to 12 years. Patient-level and tooth-level factors were significantly associated with failure.

CLINICAL RELEVANCE

For removable partial dentures retained by telescopic crowns, high success rates could be found after up to 12 years. Patient-level and tooth-level factors were significantly associated with failure.

Cumulative 10-year performance of endodontically treated teeth with prosthetic restorations of base metal alloy double crowns with friction pins-a retrospective study

OBJECTIVES

This 120-month follow-up study aimed to investigate the complication rate of abutment teeth after endodontic pretreatment with base metal alloy double crowns with friction pins.

MATERIALS AND METHODS

A total of 158 participants (n = 71, 44.9% women) aged 62.5 ± 12.7 years with 182 prostheses on 520 abutment teeth (n = 459, 88.3% vital) were retrospectively analyzed between 2006 and 2022. Of the endodontically treated abutment teeth, 6.9% (n = 36) were additionally treated with post and core reconstructions. Cumulative complication rates were calculated using the Kaplan-Meier estimator and log-rank test. In addition, Cox regression analysis was performed.

RESULTS

The cumulative complication rate at 120 months for the entire set of abutment teeth was 39.6% (confidence interval [CI]: 33.0-46.2). Endodontically treated abutment teeth (33.8%; CI: 19.6-48.0) were found to have a significantly higher cumulative fracture rate than vital teeth (19.9%; CI: 13.9-25.9, p < 0.001). Endodontically treated teeth restored with post and core reconstructions (30.4%; CI: 13.2-47.6) showed a nonsignificant lower cumulative fracture rate than that of teeth with root fillings only (41.6%; CI: 16.4-66.8, p = 0.463).

CONCLUSIONS

Higher 120-month cumulative fracture rates were observed in endodontically treated teeth. Comparable performance was observed in teeth with post and core reconstructions compared to teeth with root fillings only.

CLINICAL RELEVANCE

If endodontically treated teeth are used as abutments for double crowns, the risk of complications from these teeth should be considered when planning treatment and communicating with the patient.

Adhesion of individually formed fiber post adhesively luted with flowable short fiber composite

This laboratory study aimed to measure the push-out bond strength of individually formed fiber-reinforced composite (FRC) post luted with flowable short fiber-reinforced composite (SFRC) and to evaluate the influence of post coating with light-cured adhesive. Post spaces (Ø 1.7 mm) were drilled into 20 single-rooted decoronated premolar teeth. Post spaces were etched and treated with light-cured universal adhesive (G-Premio Bond). Individually formed FRC posts (Ø 1.5 mm, everStick) were luted either with light-cured SFRC (everX Flow) or conventional particulate-filled (PFC) dual-cure luting cement (G-CEM LinkForce). Half of the posts from each group were treated with dimethacrylate adhesive resin (Stick Resin) for 5 min before luting. After storage in water for two days, the roots were sectioned into 2 mm thick disks (n = 10/per group). Then, a push-out test-setup was used in a universal testing machine to measure the bond strength between post and dentin. The interface between post and SFRC was inspected using optical and scanning electron microscopy (SEM). Data were statistically analyzed using analysis of variance ANOVA (p = .05). Higher bond strength values (p < .05) were obtained when flowable SFRC was used as a post luting material. Resin coating of a post showed no significant effect (p > .05) on bond strength values. Light microscope images showed the ability of discontinuous short fibers in SFRC to penetrate into FRC posts. The use of flowable SFRC as luting material with individually formed FRC posts proved to be a promising method to improve the interface adhesion.

Longevity of immediate rehabilitation with direct metal-wire reinforced composite fixed partial dentures

OBJECTIVES

This study aimed to analyze the longevity of direct metal-wire reinforced composite fixed partial dentures (MRC-FPD) and factors influencing their survival and success.

METHODS

Within one private practice 513 MRC-FPD were directly applied. The preparation of a proximal cavity in abutment teeth was not limited. MRC-FPD were reinforced by one to three metal-wires. At the last follow-up MRC-FPD were considered successful, if they were still in function without any need of therapy. MRC-FPD were considered as survived, if they were repaired or replaced. Multi-level Cox proportional hazard models were used to evaluate the association between clinical factors and time.

RESULTS

Mean follow-up period (range) was 59(2-249) months. Seventy-three bridges did not survive (cumulative survival rate(CSR):86%) and further 129 bridges had received a restorative follow-up treatment (CSR:61%). AFR was 2.2% for survival and 8.6% for success. In multivariate analysis MRC-FPD with> 1 wire showed a up to 2.3x higher failure rate than MRC-FPD with one wire(p ≤ 0.023). Dentist's experience in designing MRC-FDP (p ≤ 0.017), patient's caries risk (p ≤ 0.040) and bruxism (p = 0.033) significantly influenced the failure rate: the more experience, the lower caries risk and bruxism, the lower the failure rate.

SIGNIFICANCE

For directly prepared metal-wire reinforced composite bridges high survival and moderate success rates were observed. MRC-FPD might, thus, be an immediate, short- and medium-term solution for replacing missing teeth. However, several factors on the levels of practice (dentist's experience in designing MRC-FDP), patient (bruxism, caries risk) and restoration (number of wires) were identified as significant predictors for the failure rate. The study was registered in the German Clinical Trials Register (DRKS-ID: DRKS00021576).

Evaluation of New Hollow Sleeve Composites for Direct Post-Core Construction

The preset shape and diameter of a prefabricated FRC post rarely follows the anatomy of the root canal. To solve this problem, a new hollow sleeve composite (HSC) system for post-core construction was developed and characterized. A woven fiber was impregnated with two types of resins: Bis-GMA or PMMA, and rolled into cylinders with outer diameter of 2 mm and two different inner diameters, namely 1.2 or 1.5 mm. The commercial i-TFC system was used as a control. Dual-cure resin composite was injected into these sleeves. Additionally, conventional solid fiber post was used as the inner part of the sleeve. The three-point bending test was used to measure the mechanical properties of the specimens and the fracture surface was examined using an electron microscope (SEM). The HSC (1.5 mm, Bis-GMA) revealed a statistically similar flexural modulus but higher flexural strength (437 MPa) compared to i-TFC (239 MPa; ANOVA, p < 0.05). When a fiber post was added inside, all values had a tendency to increase. After hydrothermal accelerated aging, the majority of specimens showed a significant (p < 0.05) decrease in flexural strength and modulus. SEM fracture analysis confirmed that the delamination occurred at the interface between the outer and inner materials. The HSC system provided flexibility but still high mechanical values compared to the commercial system. Thus, this system might offer an alternative practical option for direct post-core construction.

The restoration of root filled teeth: a review of the clinical literature

Clinicians often face dilemmas regarding the most appropriate way to restore a tooth following root canal treatment. Whilst there is established consensus on the importance of the ferrule effect on the predictable restoration of root filled teeth, other factors, such as residual tooth volume, tooth location, number of proximal contacts, timing of the definitive restoration and the presence of cracks, have been reported to influence restoration and tooth survival. The continued evolution of dental materials and techniques, combined with a trend towards more conservative endodontic-restorative procedures, prompts re-evaluation of the scientific literature. The aim of this literature review was to provide an updated overview of the existing clinical literature relating to the restoration of root filled teeth. An electronic literature search of the PubMed, Ovid (via EMBASE) and MEDLINE (via EMBASE) databases up to July 2020 was performed to identify articles that related the survival of root filled teeth and/or restoration type. The following and other terms were searched: restoration, crown, onlay, root canal, root filled, post, clinical, survival, success. Wherever possible, only clinical studies were selected for the literature review. Full texts of the identified articles were independently screened by two reviewers according to pre-defined criteria. This review identifies the main clinical factors influencing the survival of teeth and restorations following root canal treatment in vivo and discusses the data related to specific restoration type on clinical survival.

Dental practice-based research networks (D-PBRN) worldwide: A scoping review

OBJECTIVES

For more than twenty years, dental practice-based research networks (D-PBRN) have helped to structure clinical research in private practice. They bring together practitioners working in several structures and may include a greater number of subjects. The aims of this study were thus to systematically explore the scientific production from dental private practices in general and to map and describe the D-PBRN activity worldwide.

DATA SOURCES

Two research procedures were carried out in parallel. The first was conducted as a scoping review to examine peer-reviewed literature indexed in the PubMed database and the second was performed on the World Wide Web to identify the main characteristics of the networks (location, scientific production…).

STUDY SELECTION

368 publications were identified among which 202 were published by PBRN members and the others by private practitioners not affiliated to any network. 210 (57 % of the included articles) were produced in the USA. A higher number of diverse centers are involved in each study when it is conducted by a PBRN (59.06 ± 66.59 vs. 13.51 ± 31.58 for networks and independent teams, respectively; p < 0.01). 24 D-PBRN were identified, a majority being based in the USA and 8 in Europe.

CONCLUSIONS

Although dental practice-based research has grown over the years, the number of D-PBRN worldwide remains low. Even if it requires some investment to produce research in dental offices, this type of networks helps to fill the gap between private practice and research and to improve knowledge on oral health.

RELEVANCE

The mapping of all the dental PBRN together with the research topics studied throughout the world make the relevance of this article. The ways to improve practice-based research in dentistry are also discussed in the paper.

Longevity and Risk Factors of Post Restorations after up to 15 Years: A Practice-based Study

INTRODUCTION

The aims of this multicenter, practice-based cohort study were to evaluate the success and survival of endodontically treated teeth with post restorations (ETT+Ps) and to analyze factors associated with the longevity of ETT+Ps.

METHODS

Eight general dental practitioners each placed up to 27 ETT+Ps without any restriction to post materials or dimensions. Only incisors, canines, and premolars were included. At the last follow-up visit, ETT+Ps were considered as successful if the post and the initially placed definitive restoration were sufficient, whereas ETT+Ps were considered as survived if the post was still in function. Multilevel Cox proportional hazards models were used to evaluate the association between a range of predictors and time until no success and no survival.

RESULTS

Overall, 195 endodontic posts in 195 patients were followed up for a mean (95% confidence interval) of 91 (81-101) months; the longest follow-up was 15 years. Of these, 122 ETT+Ps were considered successful (estimated success time = 110 [101-120] months), and 152 ETT+Ps survived [estimated survival time = 133 [124-141] months). Regarding the categories of success and survival, the annual failure rates were 6.0% and 3.3%, respectively. Recementation of old (telescopic) crowns after placing new posts was the only significant predictor for decreased time until failure for both success and survival analyses. By excluding recemented restorations, annual failure rates decreased to 3.5% and 2.1%, respectively.

CONCLUSIONS

For EET+Ps placed in a private practice setting, high success and survival rates were observed. If old (telescopic) crowns were recemented after new posts were placed, the high risk of subsequent failure should be considered and communicated with patients.

Risk Factors for Failure of Direct Restorations in General Dental Practices

The aim of this retrospective noninterventional multicenter practice-based study was to analyze factors influencing the survival of direct restorations. Records from patients who visited 5 private practices regularly were searched for the presence of direct restorations. Data were recorded from 7,858 patients with 27,407 direct restorations being detected at least 6 mo before the last recall visit. Multilevel Cox proportional hazard models were used to evaluate the association between clinical factors and time until failure. Within 228 mo, 5,493 failures could be observed. Median survival time was 207 mo. The annual failure rates were 3.8%, 4.0%, 4.6%, 4.9%, and 3.9% for class I, II, III, IV, and V restorations, respectively. Class II and IV restorations showed a 1.1-times (95% CI, 1.0 to 1.2) and 1.2-times (95% CI, 1.1 to 1.2) higher failure rate than class I restorations ( P ≤ 0.029). Patients aged <20 y and >60 y showed up to a 1.4-times higher failure rate than patients aged 20 to 60 y ( P ≤ 0.015). Restorations that underwent check-up twice a year or more showed a significantly higher failure rate than those that did so less than twice a year ( P < 0.001). Furthermore, the dentists significantly influenced time until failure ( P < 0.001). Regarding the restorative material, composites showed up to a 2.1-times longer time until failure than GIC ( P ≤ 0.020). Moderate failure rates were observed for direct restorations in the private practice setting after up to 18.5 y. Within the limitations of the present study, several factors on the levels of practice (i.e., dentist), patient (i.e., age), and tooth (i.e., restorative material, restored surfaces according to the classification of Black) were significant predictors for the failure rate. Therefore, treatment decision should take into account most relevant factors (German Clinical Trials Register DRKS00015228).

Success and survival of post-restorations: six-year results of a prospective observational practice-based clinical study

AIM

This prospective, noninterventional, multi-centre, practice-based study aimed to evaluate the longevity of endodontically treated teeth (ETT) restored with posts and to analyse factors influencing the success and survival of endodontic posts.

METHODOLOGY

Eight general dental practitioners each placed up to 27 endodontic posts without any restriction to size and material. Teeth were restricted to incisors, canines and premolars. Multi-level Cox proportional hazards models were used to evaluate the association between clinical factors and time until failure.

RESULTS

A total of 195 endodontic posts were followed-up for up to 6.5 years in 195 patients. Of these, 140 posts were judged as successful [mean success time: 59 (55-63) months]; the mean annual failure rate was 8.6%. This decreased to 4.4% when excluding recementations. 152 posts survived [mean survival time: 64 (60-67) months]. Recemented restorations had an eight times higher failure rate compared with new restorations. Furthermore, restorations with glass fibre post had a significantly lower success rate compared with titanium posts.

CONCLUSION

Relatively low success and survival rates occurred for restorations with posts after root canal treatment in a private practice setting after a follow-up of up to 6.5 years. Recemented crowns had a high risk of failure.