A novel method for alveolar bone grafting assessment in cleft lip and palate patients: cone-beam computed tomography evaluation

Evaluation of Secondary Alveolar Bone Grafting for Unilateral Complete Cleft Alveolus: A Retrospective Cone Beam Computed Tomography-Based Study

Background: In patients with cleft lip and palate (CLP), secondary alveolar bone grafting (SABG) with particulate cancellous bone marrow (PCBM) is recommended. Objective: To compare bone graft outcomes in patients with unilateral CLP, when SABG is completed before or after canine tooth eruption (ACE or BCE), as measured by cone beam computed tomography (CBCT). Methods: Patients were allocated into two cohorts, ACE and BCE. The outcomes were evaluated using CBCT, followed by univariate and multifactorial analyses. Results: A total of 468 patients (age 11.61 ± 4.03 years; male/female 288/180) were analyzed, including 282 in the BCE group (9.41 ± 1.59 years, 175/107) and 186 in the ACE group (14.95 ± 4.31 years, 113/73). Although 5-level assessment revealed no significant difference in clinical success rate (>4 points) between the BCE and ACE groups (53.90% vs. 47.85%, p = 0.20), BCE group showed significantly higher rate of bone bridges formation (73.05% vs. 62.90%, p = 0.02), which can be attributed to variations in orthodontic participation and follow-up time. Independent predictors of graft failure were wide cleft, severe oronasal fistula, no palatal bone wall, and insufficient PCBM filling (p < 0.01). Conclusions: SABG should be performed before canine eruption with more aggressive PCBM filling and oral fistula management.

Tooth Autotransplantation, Autogenous Dentin Graft, and Growth Factors Application: A Method for Preserving the Alveolar Ridge in Cases of Severe Infraocclusion-A Case Report and Literature Review

Background: Tooth infraocclusion is a process in which a completely or partially erupted tooth gradually moves away from the occlusal plane. Submerged teeth can lead to serious complications. Treating teeth with infraocclusion is very challenging. One of the procedures allowing for the replacement of a missing tooth is autotransplantation. The aim of this paper is to review the literature on teeth autotransplantation, supported by a case report involving the autotransplantation of a third mandibular molar into the site of an extracted infraoccluded first mandibular molar, as well as the utilization of advanced platelet-rich fibrin (A-PRF) alongside autogenous dentin grafts for bone tissue regeneration. Methods: A severely infraoccluded first permanent right mandibular molar was extracted and then ground to obtain the dentin graft. A-PRF clots (collected from the patient's peripheral blood) were added to the autogenous dentin graft, to create the A-PRF membrane. An atraumatic extraction of the lower left third molar was performed and then it was transplanted into the socket of tooth no. 46. Immediately after transplantation, tooth no. 38 was stabilized with orthodontic bracket splints for 3 months. The patient attended regular follow-up visits within 12 months. Results: After one year, the patient did not report any pain. In the clinical examination, the tooth and surrounding tissues did not show any signs of infection. However, radiographically, cervical inflammatory resorption, unchanged pulp canal dimensions, absent root growth, periapical radiolucency, and lack of apical and marginal healing were observed. Reconstruction of the bone defect was obtained and the alveolar ridge of the mandible was preserved. Due to poor stability of the tooth and severe resorption, the tooth needed to be extracted. Conclusions: This study is designed to critically evaluate the efficacy of autotransplantation, the application of growth factors, and the integration of autogenous dentin grafts in remedying dental deficiencies resulting from reinclusion. We aim to point out the possible causes of treatment failure.

Soft Tissue Retraction Maneuver in Cone Beam Computed Tomography Prior to Crown-Lengthening Procedure-A Technical Note

Background: An accurate determination of the biological width and the relationship of the cemento-enamel junction with the border of the alveolar bone is crucial during a clinical crown-lengthening (CCL) procedure. The aim of this study was to present a technical note about the retraction techniques in cone beam computed tomography (CBCT) prior to CCL, highlighting the significant enhancement in procedural accuracy and predictability that these techniques offer. Methods: Clinical and radiological examinations should be performed before a CCL procedure. It is necessary to determine the length of the tooth crowns, the periodontal pockets' depth, and the phenotype of the gingiva. The ideal CBCT examination should be performed with soft tissue retraction. This can be achieved using retractors or cotton rolls. Results: Retraction of the lips, cheeks, and tongue allows one to assess the marginal gingiva, the cemento-enamel junction, and the alveolar bone. A detailed plan of the CCL procedure, which involves retraction, ensures both the aesthetic appeal and the achievement of a newly defined gingival zenith, enhancing the overall visual harmony. Conclusions: Compared with conventional radiographic imaging, the soft tissue retraction maneuver in CBCT prior to CCL surgery offers an effective approach to the evaluation and diagnosis of soft and hard tissue. This is because of the detailed planning of the aesthetic CCL procedure. Such an approach leads to superior aesthetic outcomes in dentistry, contributing to the advancement of aesthetic dentistry through a harmonious blend of art and science.

Evaluation of the Regenerative Capacity of Demineralized Bone Matrix vs Fat Graft in Alveolar Cleft Model in Albino Rats

AIM

This study was performed to evaluate the regenerative capacity of demineralized bone matrix vs fat graft, both guided by pericardium membrane in alveolar cleft model in albino rats.

MATERIALS AND METHODS

A total of 72 rats were required in this study. A surgical bone defect with a 7 mm length × 4 mm width × 3 mm depth was created as a model of an alveolar cleft, then the rats were divided randomly into four equal groups each group contained 18 rats: control group (defect only), the membrane group (the defect was covered by the pericardium membrane), the demineralized bone matrix (DBM) group (the defect was filled with DBM guided by pericardium membrane) and fat group (the defect was filled with a fat graft guided by the pericardium membrane). Around 6 rats from each group were euthanized after 2, 4, and 8 weeks. Skulls were scanned with cone beam computed tomography (CBCT) and harvested for histological evaluation with routine H&E immunohistochemical stains (Anti-osteocalcin and Anti-Wnt5a). The data was recorded and statistically analyzed by a two-way ANOVA.

RESULTS

The study showed a notable formation of new bone, and expression of OCN and Wnt5a were notably increased by time in the fat group. However, the density of bone grafts and OCN and Wnt5a expression decreased with time in the DBM group. Control and membrane groups showed negative OCN and Wnt5a immune-reactivity in the cleft site.

CONCLUSION

Fat graft results were superior to DBM results with regard to mucosal closure and accelerated bone regeneration, and may represent an effective treatment for alveolar cleft reconstruction.

CLINICAL SIGNIFICANCE

Finding an inexpensive, accessible, biocompatible and easily manipulated treatment for craniofacial reconstruction and fat graft fulfilled the desired aims. Further investigations with prolonged evaluation periods are needed. How to cite this article: Abdel Raouf E, Elsherbini AM, Abdel Salam Yousef Y, et al. Evaluation of the Regenerative Capacity of Demineralized Bone Matrix vs Fat Graft in Alveolar Cleft Model in Albino Rats. J Contemp Dent Pract 2024;25(6):554-562.

Validation and comparison of 2D grading scales and 3D volumetric measurements for outcome assessment of bone-grafted alveolar clefts in children

BACKGROUND

Several methods have been proposed to assess outcome of bone-grafted alveolar clefts on cone beam computed tomography (CBCT), but so far these methods have not been compared and clinically validated.

OBJECTIVES

To validate and compare methods for outcome assessment of bone-grafted clefts with CBCT and provide recommendations for follow-up.

METHODS

In this observational follow-up study, two grading scales (Suomalainen; Liu) and the volumetric bone fill (BF) were used to assess the outcome of 23 autogenous bone-grafted unilateral alveolar clefts. The mean age at bone grafting was 9 years. The volumetric BF was assessed in five vertical sections. The bone-grafted cleft outcome was based on a binary coding (success or regraft) on a clinical multidisciplinary expert consensus meeting. Grading scales and volumetric assessment were compared in relation to the bone-grafted cleft outcome (success or regraft). Reliability for the different outcome variables was analyzed with intra-class correlation and by calculating kappa values.

LIMITATIONS

The study had a limited sample size. Clinical CBCT acquisitions had a varying tube current and exposure time.

RESULTS

Volumetric 3D measurements allowed for outcome assessment of bone-grafted alveolar clefts with high reliability and validity. The two grading scales showed highly reliable outcomes, yet the validity was high for the Suomalainen grading scale but low for the Liu grading scale.

CONCLUSIONS

Volumetric 3D measurement as well as the Suomalainen grading can be recommended for outcome assessment of the bone-grafted cleft. Yet, one must always make a patient-specific assessment if there is a need to regraft.

Bioglass 45S5, a relevant alternative to autogenous harvesting for secondary alveolar bone grafts in clefts? Retrospective study of one hundred surgeries

The secondary alveolar bone grafting (SABG) step restores the continuity of the alveolar bone necessary for dentition. Faced with the complications of autografts, synthetic biomaterials such as Bioglass (BG) 45S5 have been proposed. The objective was to evaluate the success rate of SABG with the addition of BG 45S5 and to highlight the prognostic factors. Patients who underwent operation between 2015 and 2021 and had follow-up cone-beam computed tomography (CBCT) were analyzed. Multivariate analysis was performed to determine factors influencing radiographic success. A total of 102 SABG were analyzed. They were unilateral total cleft lip and palate (49, 48.0%). The mean age at surgery was 9.32 ± 3.09 years. Surgeries were performed mainly outside a syndromic context and without a family history after orthodontic preparation. The radiographic success rate at 1 year was 80.4%. Mixed dentition stage (odds ratio [OR] = 7.3, p = 0.024), absence of syndromic context (OR = 20.7, p = 0.024) and female sex (OR = 4.88, p = 0.021) were factors predictive of surgical success. The use of BG 45S5 instead of autograft is relevant for SABG, with a 1-year success rate of over 80%. The stage of mixed dentition, the absence of syndromic context, and female sex were factors for good prognosis.

Updates in Cleft Care

Cleft lip and/or palate is a congenital malformation with a wide range of presentations, and its effective treatment necessitates sustained, comprehensive care across an affected child's life. Early diagnosis, ideally through prenatal imaging or immediately postbirth, is paramount. Access to longitudinal care and long-term follow-up with a multidisciplinary approach, led by the recommendations of the American Cleft Palate Association, is the best way to ensure optimal outcomes. Multiple specialties including plastic surgery, otolaryngology, speech therapy, orthodontists, psychologists, and audiologists all may be indicated in the care of the child. Primary repair of the lip, nose, and palate are generally conducted during infancy. Postoperative care demands meticulous oversight to detect potential complications. If necessary, revisional surgeries should be performed before the child begin primary school. As the child matures, secondary procedures like alveolar bone grafting and orthognathic surgery may be requisite. The landscape of cleft care has undergone significant transformation since early surgical correction, with treatment plans now tailored to the specific type and severity of the cleft. The purpose of this text is to outline the current standards of care in children born with cleft lip and/or palate and to highlight ongoing advancements in the field.

β-Tricalcium Phosphate as Alveolar Bone Grafting in Cleft Lip/Palate: A Systematic Review

The aim of this systematic review is to describe and identify the prospects of β-Tricalcium Phosphate (β-TCP) as an alveolar bone grafting (ABG) material in cleft lip/palate (CL/P) or alveolar bone cleft defects. A systematic review protocol based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 (PRISMA 2020) was drafted. The literature search was conducted using MEDLINE/PubMed, Web of Science/ISI Web of Knowledge, Scopus, and the Cochrane Library, with English as the inclusion criterion and no publication year limits. The keywords yielded a total of 5824 publications. After removing duplicates and non-English articles, there were 3196 suitable articles available for evaluation. Subsequently, 1315 studies remained after reviewing titles and abstracts. Furthermore, 85 full articles were assessed for eligibility. After reading the complete texts of those papers, 20 were eventually selected that matched the inclusion requirements. Thirteen out of the twenty studies included in this systematic review were deemed to have a low risk of bias; one had a high risk of bias; and six had a moderate risk of bias due to not reporting randomization. β-TCP, when used as an ABG material, is biocompatible, visible, practical, offers a less invasive procedure, and does not interfere with orthodontic treatment. Synthetic β-TCP for ABG can be an alternative to autologous bone grafts under certain terms and conditions. The efficacy of β-TCP for ABG in CL/P or alveolar bone cleft defects can be enhanced through a tissue engineering approach that combines β-TCP with growth factors, mesenchymal stem cells, or other graft materials, along with modifications to β-TCP's physical properties.

Three-Dimensional Assessment of Eustachian Tube in Patients With Cleft Palate Versus Controls: A CBCT Study

To compare the morphological characteristics of the Eustachian tube (ET) between patients with cleft palate and healthy controls with the use of cone-beam computed tomography (CBCT).

Retrospective assessment of treated nonsyndromic patients with cleft palate and a control group.

CBCT images of 51 patients with cleft palate who had previously undergone surgery to close the cleft palate and a control group of 51 patients were included in this study. Syndromic patients were excluded.

The cleft group were divided into 3 groups according to the palatoplasty technique, which was done in the infancy period to close the cleft palate (Nadjmi modification of Furlow, Sommerlad, and V-Y pushback). Finally, ET length (ETL), ET angle, and auditory tube angle (ATA) were measured in all patients.

The ETL, ETA, and ATA in the cleft and the normal control groups were 29.73 ± 3.14 and 32.18 ± 3.34 mm, 33.18 ± 2.57 and 35.40 ± 3.93, and 141.64 ± 4.13 and 138.87 ± 4.96, respectively. All 3 features were statistically significant among the groups (All Ps < .05). ETL and ETA were significantly higher in Nadjmi modification of Furlow and Sommerlad palatoplasty techniques compared to the V-Y pushback technique, while there was no significant difference in the ATA between the palatoplasty groups.

Cleft palate can significantly affect the morphological characteristics of the ET. Type of the infancy palatoplasty can influence some of its dimensions.

Should Cone-Beam Computed Tomography Be Performed Prior to Orthodontic Miniscrew Placement in the Infrazygomatic Crest Area?-A Systematic Review

There is no unequivocal scientific consensus for the temporary anchorage device (TAD) positioning in the infrazygomatic crest area (IZC). The two principal aims of this systematic review were to assess bone availability in the IZC and to establish both the target site and the need for cone-beam computed tomography (CBCT) prior to miniscrew placement. The study was performed following PRISMA guidelines (PROSPERO: CRD42023411650). The inclusion criteria were: at least 10 patients, three-dimensional radiological examination, and IZC assessment for the TAD placement. ROBINS-I tool and Newcastle-Ottawa Scale were used for quality evaluation. No funding was obtained. The study was based on the information coming from: PubMed, Google Scholar, Web of Science Core Collection, MDPI, Wiley, and Cochrane Libraries. The last search was carried out on 1 August 2023. Fourteen studies were identified for analysis. A narrative synthesis was performed to synthesize the findings of the different studies. Unfortunately, it is not possible to establish the generally recommended target site for IZC TAD placement. The reasons for this are the following: heterogeneity of available studies, inconsistent results, and significant risk of bias. The high variability of bone measurements and the lack of reliable predictors of bone availability justify the use of CBCT for TAD trajectory planning. There is a need for more high-quality studies aiming three-dimensional bone analysis of the IZC.

Correlation between alveolar cleft morphology and the outcome of secondary alveolar bone grafting for unilateral cleft lip and palate

Background

Secondary alveolar bone grafting (SABG) is an integral part of the treatment for cleft lip and alveolus and cleft lip and palate. However, the outcome of SABG was not satisfactory as expected, factors that affecting the outcome were still controversial. The aims of this study were to summarize a new method for the classification of alveolar cleft morphology in patients with unilateral cleft lip and alveolus or unilateral cleft lip and palate, to evaluate the correlation between the morphology and SABG outcomes, to identify factors that might predict the outcomes.

Methods

The characteristics of the cleft morphologies of 120 patients who underwent SABG were observed using the preoperative Cone-Beam Computed Tomography (CBCT) images. 52 patients who had CBCT scans performed at least 6 months after SABG were included for the evaluation of outcomes. Both categorical and continuous evaluation methods were measured. Correlations between cleft morphology and SABG outcomes were assessed using the Pearson correlation coefficient in SPSS 27.0.0.

Results

A new method for the classification of cleft morphology was summarized:type I, prism type (labial defect size ≥ palatal defect size; nasal defect size ≥ occlusal defect size); type II, prism’ type (labial defect ≥ palatal defect; nasal defect < occlusal defect); type III, inverted prism type (palatal defect ≥ labial defect); type IV, funnel type (presented as a significantly narrow defect area in the middle towards the vertical dimension); and type V, undefinable (extremely irregular morphology can’t be defined as any of the above types). Categorical evaluation showed 8 failure, 11 poor, 12 moderate, and 21 good results, while the average bone filling rate was 59.24 ± 30.68%. There was a significant correlation between the cleft morphology and categorical/continuous evaluation outcome (p < 0.05).

Conclusion

The new method for the classification of alveolar cleft morphology summarized in this study was comprehensive and convenient for clinical application. Both categorical and continuous methods should be used for radiographic assessments in patients undergoing SABG. The chances of a successful procedure might be better when the patient has type I or IV morphology, in which the shape is like a funnel in the relatively palatal or occlusal area towards the vertical dimension. A relatively great amount of bone resorption was observed in most patients.

Trial registration Chinese clinical trial registry; registration number: ChiCTR2100054438.

Secondary bone grafting for alveolar clefts: surgical timing, graft materials, and evaluation methods

Alveolar cleft belongs to the spectrum of cleft lip and/or palate, affecting 75% of cleft lip/palate patients. The goals of alveolar cleft treatment are stabilizing the maxillary arch, separating the nasal and oral cavities, and providing bony support for both erupting teeth and the nasal base via the piriform aperture. Secondary alveolar bone grafting is a well-established treatment option for alveolar cleft. Secondary alveolar bone grafting is performed during the period of mixed dentition using autologous bone from various donor sites. There are several issues relevant to maximizing the success of secondary alveolar bone grafting, including the surgical timing, graft material, and surgical technique. In this study, we reviewed issues related to surgical timing, graft materials, and evaluation methods in secondary alveolar bone grafting.Abbreviations: ABG, alveolar bone grafting; CBCT, cone-beam computed tomography; DBM, demineralized bone matrix; GPP, gingivoperiosteoplasty; rhBMP, recombinant human bone morphogenetic protein; 2D, two dimensional; 3D, three dimensional

Regenerative Strategies in Cleft Palate: An Umbrella Review

(1) Background: Alveolar bone defects or decreased alveolar bone height and width may have different causes, such as cleft palate. Regenerative procedures in oro-dental defects are challenging due to anatomical factors and the distinct cell populations involved. The iliac crest bone graft remains the gold-standard for cleft palate closure. However, tissue regeneration approaches have been employed and their outcome reviewed, but no conclusions have been made about which one is the gold-standard. (2) Methods: this umbrella review aims to critically appraise the effectiveness of the current approaches in bone defects regeneration in non-syndromic patients with cleft palate. A search was performed in PubMed, Cochrane Library, Scopus, Web of Science and EMBASE databases. (3) Results: Systematic reviews of randomized and non-randomized controlled trials with or without meta-analysis were included. Nine articles were included in the qualitative analysis and five in the quantitative one. The included studies quality was evaluated with AMSTAR2. (4) Conclusions: The use of new regenerative strategies, such as bone morphogenic protein 2, appears to provide similar results regarding bone volume, filling, and height to the standard technique with the iliac crest bone graft.

Alveolar bone heights of maxillary central incisors in unilateral cleft lip and palate patients using cone-beam computed tomography evaluation

PURPOSE

The aims of this retrospective cross-sectional study were to measure and compare labial and palatal alveolar bone heights of maxillary central incisors in unilateral cleft lip and palate patients, following STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) guidelines.

PATIENTS AND METHODS

The study group consisted of 21 patients with a mean age of 16 years. High-resolution cone-beam computed tomography was performed at least one year after secondary alveolar bone grafting. The experimental side was the cleft side and the contralateral side without congenital cleft was the control. Measurements were performed on incisors' midsagittal cross-sections. The Wilcoxon signed-rank test was used for intergroup comparisons.

RESULTS

The labial and palatal distances between alveolar bone crests and cementoenamel junctions were significantly greater on the cleft side than on the noncleft side. Mean differences were 0.75 and 1.41 mm, respectively. The prevalence of dehiscences at the cleft side maxillary central incisors was 52% on the labial surface and 43% on the palatal surface. In the controls, it was 19% and 14%, respectively.

CONCLUSION

The cleft-adjacent maxillary central incisors had more apically displaced alveolar bone crests on the labial and palatal sides of the roots than the controls. Higher prevalence of dehiscences was found on the cleft side. Bone margin differences predispose to gingival height differences of the central incisors. These differences could increase the demands of patients to obtain more esthetic treatment results with orthodontic extrusion and periodontal intervention on the cleft side.