Long-term porosity and retreatability of oval-shaped canals obturated using two different methods with a novel tricalcium silicate sealer

Comparative Evaluation of Different Obturation Techniques for Root Canal Filling of Permanent Teeth: An In-Vitro Study

INTRODUCTION

Achieving success in root canal (RC) therapy relies on three key components: comprehensive cleaning of the canal, efficient disinfection, and proper filling of the canal space. The present study aimed to compare the efficacy of four obturation techniques: single cone (SC), GuttaCore (GC), cold lateral condensation (LC), and C Point system for RC filling of permanent teeth.

MATERIALS AND METHODS

76 extracted human mandibular first premolars were divided into four groups, with 19 teeth in each group (group A, obturation with SC technique; group B, obturation with GC; group C, obturation with LC; and group D, obturation with C Point system). The samples were marked at 4 mm and 8 mm from the root apex using a marker and calliper, sectioned horizontally, and analyzed under a stereomicroscope at 20x magnification. The mean percentage (%) of gutta-percha (GP)-filled area was compared using a two-way analysis of variance (ANOVA), followed by the Bonferroni post-hoc test.

RESULTS

The mean percentage of GP-filled area at a distance of 4 mm from the apex was highest in group B (0.86±0.04; 95% CI: 0.845-0.881), followed by group D (0.70±0.07; 95% CI: 0.664-0.736), group A (0.61±0.05; 95% CI: 0.595-0.642), and least in group C (0.58±0.09; 95% CI: 0.543-0.627), and the difference was statistically significant (p≤0.05). The post-hoc pairwise comparison of groups at 4 mm revealed that there were statistically significant differences between group D and groups B, C, and A (p ≤ 0.001). The mean percentage of the GP area at a distance of 8 mm from the apex was highest in group B (0.81±0.10; 95% CI: 0.761-0.861), followed by group D (0.75±0.07; 95% CI: 0.725-0.792), group A (0.69±0.07; 95% CI: 0.658-0.729), and lowest in group C (0.65±0.10; 95% CI: 0.607-0.709), and this difference was statistically significant (p≤0.05). Post-hoc pairwise comparison of groups at 8 mm revealed that there was a statistically significant difference between groups D and C (p=0.006), whereas no statistically significant differences were noted between groups D and B (p=0.473). Furthermore, no statistically significant differences were noted between groups C and A at 4 mm and 8 mm (p>0.05).

CONCLUSION

Obturation with the GC system provided the best results in terms of the percentage of GP-filled area at 4 mm. However, at 8 mm from the apical region, both the GC and C Point systems provided similar results.

Effect of the filling technique on the filling removal from oval-shaped canals

OBJECTIVES

This ex vivo study aimed to evaluate the influence of different filling techniques on the filling removal from oval root canals filled with bioceramic sealer.

METHODS

Thirty-six mandibular incisors with single oval canals were filled with bioceramic sealer following the techniques (n = 12): single-cone, modified McSpadden, or continuous wave of condensation, and scanned by micro-computed tomography (micro-CT). The filling was removed using the Clearsonic ultrasound tip and Reciproc system up to the R40 instrument, and the working time was recorded. The teeth were scanned again by micro-CT. Percentage of remnant volume (mm³) of the filling material, dentin thickness, and root canal transportation were measured. The data was analyzed using parametric and non-parametric tests with a significance level of 5%.

RESULTS

It took more time to remove the filling material using the continuous wave of condensation technique (p < 0.05), followed by the modified McSpadden and single-cone techniques. There was no difference (p > 0.05) when comparing the percentage of remaining filling material among the three groups, nor did it among the segments of each tooth. There was also no difference in the analysis of dentin thickness and transportation when comparing the groups (p > 0.05).

CONCLUSIONS

The filling technique did not influence the amount of remaining filling material, dentin thickness, and transportation. The working time was longer with thermoplastic filling techniques.

CLINICAL RELEVANCE

Endodontic retreatment in teeth filled with bioceramic sealers increases with their use. Several techniques are used to fill the root canals, thus, it is important to know whether the filling technique influences the non-surgical endodontic retreatment.

Endodontic Treatment of a Dilacerated Maxillary Second Premolar With a Severely Curved Root Canal: A Case Report and Literature Review

Dilaceration is a developmental anomaly characterized by a sharp change in the axial inclination between the crown and the root of a tooth. Severe root curvature in a dilacerated tooth can greatly complicate root canal treatment. This case report details the successful endodontic treatment of a dilacerated maxillary second premolar with significant root curvature. It highlights the importance of a thorough understanding of root canal anatomy and demonstrates the effectiveness of using pre-curved hand files along with heat-treated nickel-titanium rotary instruments in navigating complex root structures to achieve successful treatment outcomes.

ProTaper universal retreatment retreatment potential in oval-shaped canals filled with different obturation techniques-A micro-computed tomography study

Aim

The objective of this in vitro micro-computed tomography investigation is to assess the efficacy of the ProTaper Universal Retreatment System in retreating oval-shaped root canals filled with three obturation procedures.

Materials and Methods

Thirty-six lower incisors with a single oval root canal were prepared using XP-Endo Shaper up to size 30/0.04, and allocated into three equal groups based on the filling technique: Group 1: Warm vertical condensation technique; Group 2: GuttaCore obturators; Group 3: Cold lateral condensation technique. All samples were further retreated using the ProTaper Universal Retreatment system. Micro-CT analysis was performed before and after the retreatment procedure. Statistical analysis was performed with a significance level of 0.05. Data analysis was conducted using the Kolmogorov-Smirnov and Kruskal-Wallis H tests.

Results

The best performance of the files was achieved when the removal of the filling in the entire canal was considered. However, this outcome was not statistically significant when compared with the other observed root canal levels. The retreatment procedure could not ensure thorough cleanliness of the canal walls from filling remnants, regardless of the obturation technique and observational level.

Conclusions

The ProTaper Universal Retreatment system used for the removal of gutta-percha and sealer in oval-shaped root canals demonstrated equal effectiveness, regardless of the obturation technique used.

Retreatability of NeoSEALER Flo obturated with warm vertical compaction versus single-cone technique using two different retreatment systems

Aim

The aim of this study was to compare the retreatability of NeoSEALER Flo obturated with warm vertical compaction (WVC) and single-cone (SC) techniques using two different retreatment systems.

Materials and Methods

Thirty-two root canals were shaped and obturated with NeoSEALER Flo either in an SC obturation technique or a WVC technique. Samples were retreated using ProTaper retreatment or EdgeFile XR retreatment system. The percentage of remaining debris after retreatment was analyzed under a scanning electron microscope using ImageJ software. The time taken to reach full working length (WL) and induce patency was recorded.

Statistical Analysis

Statistical analysis was performed using an unpaired t-test and a one-way analysis of variance test.

Results

The percentage of remaining debris after retreatment was significantly higher in the SC technique than in the WVC technique, regardless of the retreatment system used. EdgeFile XR system removed more filling material than the ProTaper retreatment system, regardless of the obturation technique. The apical region showed significantly higher remaining debris than other regions in all groups. The WL and patency were achieved faster in the SC group, while in the WVC group, the EdgeFile XR system was faster.

Conclusions

The WVC technique showed better retrieval of the filling material; however, a longer time was taken for retreatment. EdgeFile XR system performed better in removing filling materials from inside the canals.

Effectiveness of different supplementary protocols for remaining filling material removal in endodontic reintervention: an integrative review

The aim of this study was to perform an integrative review to identify the most effective supplementary protocols used after filling material (FM) removal and root canal reinstrumentation, during endodontic reintervention. The literature search was performed on the electronic databases PubMed and Latin American and Caribbean Health Sciences Literature (LILACS), using a combination of specific scientific descriptors. Selection criteria accepted articles published in English, Spanish and Portuguese languages, up to August 2021, involving in vitro and ex vivo studies. After applying the eligibility criteria, 46 articles were included for qualitative analysis. The tool for qualitative analysis of quasi-experimental studies of the Joanna Briggs Institute was used to determine the risk of bias of the included articles. The selected articles provided important data regarding the following supplementary protocols: sonic and ultrasonic activation of the irrigating solution; the use of ultrasonic inserts, XP-endo system instruments, and photon-induced photoacoustic streaming for mechanical debridement; and new devices as GentleWave system, and the self-adjusting file. Overall, all supplementary protocols demonstrated efficacy in removing the remaining FM. The implementation of various supplementary protocols can effectively remove the remaining FM from the root canal walls, although complete removal is not always achieved. However, it was not possible to determine the most effective protocol. Conversely, their association can enhance remaining FM removal. Remaining FM attached to root canal walls hinders proper chemical-mechanical preparation during endodontic reintervention. Supplementary protocols optimize the remaining FM removal, enhancing cleaning and disinfection of root canal.

Endodontic Retreatment of a Mandibular Second Molar With a C-shaped Root Canal Configuration: A Case Report

Root canal retreatment in mandibular second molars with C-shaped root canal configurations presents notable challenges. This article presents a case of successful root canal retreatment in a mandibular second molar exhibiting this complex configuration. Achieving a successful endodontic outcome in such cases necessitates a comprehensive understanding of the unique root canal anatomy. Moreover, the employment of advanced instruments and techniques is crucial to effectively address the intricacies of the C-shaped root canal system.

Locating and Treating Three Calcified Canals in a Mandibular First Molar With Radix Entomolaris and Five Canals: A Case Report

The success of root canal treatment is highly contingent on the comprehensive shaping, cleaning, and filling of the entire root canal system. Failure to address one or more canals often results in an increased likelihood of post-treatment apical periodontitis. Typically, mandibular first molars feature two roots and three canals, but they may also exhibit anatomical variations, such as a mesial middle canal or radix entomolaris (RE). This article presents a case where three calcified canals in a mandibular first molar with RE and five canals were successfully located and treated.

Biocompatibility analysis in subcutaneous tissue and physico-chemical analysis of pre-mixed calcium silicate–based sealers

OBJECTIVES

To evaluate the biocompatibility, physical and chemical properties of three pre-mixed calcium silicate-based sealers and an epoxy resin-based material were assessed. Pre-mixed sealers supposedly obtain water from the root canal moist to hydrate and set.

MATERIALS AND METHODS

Polyethylene tubes were filled with the materials Bio-C Sealer Ion+, Bio-C Sealer, EndoSequence BC Sealer and AH Plus Jet, or left empty and surgically implanted in the subcutaneous tissue of Wistar rats. The animals were euthanised and the tubes and tissue were removed for histological analysis and scanning electron microscopy (SEM) coupled with energy-dispersive spectrometry (EDS). Materials' surface chemical characterisation was assessed using Raman spectroscopy and SEM/EDS. Flow, setting time (in two conditions), solubility, radiopacity and pH were also analysed. ANOVA and Bonferroni correction were performed for comparisons (P < 0.05).

RESULTS

Inflammatory response observed in the tissues subsided from 7 to 30 days. Tungsten migration could be detected in the surrounding tissue following AH Plus Jet implantation. All calcium silicate-based sealers exhibited zirconium oxide (radiopacifier) and tricalcium silicate peaks before and after implantation. All materials exhibited flow values above 17 mm. An approximately tenfold difference was observed between the plaster- and metal-mould setting times of the calcium silicate cements indicating its sensitivity to moist variations and solubility above 8% was also observed for these materials.

CONCLUSIONS

Pre-mixed materials exhibited variable setting time and solubility with a decreasing inflammatory response.

CLINICAL RELEVANCE

The variable moist-dependant setting time with high solubility poses a concern for the clinical use of these pre-mixed sealers.

Influence of the root canal filling technique on the success rate of primary endodontic treatments: a systematic review

Objectives

This study aimed to investigate the influence of different obturation techniques compared to cold lateral compaction on the success rate of primary non-surgical endodontic treatments.

Materials and Methods

Systematic searches were performed for studies published up to May 17th, 2022 in MEDLINE/PubMed, Cochrane Library, Web of Science, Scopus, EMBASE, and Grey Literature Reports. Randomized clinical trials and nonrandomized (nonrandomized clinical trials, prospective or retrospective) studies that evaluated the success rate of primary non-surgical endodontic treatments obturated with the cold lateral compaction (control) and other obturation techniques were included. The revised Cochrane risk of bias tools for randomized trials (RoB 2) and nonrandomized studies of interventions (ROBINS-I) were used to evaluate the risk of bias. The Grading of Recommendations Assessment, Development, and Evaluation (GRADE) tool was used to evaluate the certainty of evidence.

Results

Eleven studies (4 randomized clinical trials (RCTs), 4 prospective, and 3 retrospectives) were included. Two RCTs were classified as having some concerns risk of bias and 2 as a low risk of bias. Two nonrandomized studies were classified as having a critical risk of bias and 5 as having a moderate risk of bias. The GRADE analysis demonstrated a very low to moderate certainty of evidence.

Conclusions

This systematic review generally evidenced no differences in the success rate of primary non-surgical endodontic treatments when the cold lateral compaction technique and other obturation techniques are performed. Further well-designed studies are still necessary.

Immediate and Long-Term Radiopacity and Surface Morphology of Hydraulic Calcium Silicate-Based Materials

The present study aimed to evaluate and compare the radiopacity and surface morphology of AH Plus Bioceramic Sealer (AHPB), Bio-C Sealer (BIOC), Biodentine (BD), BioRoot RCS (BR), Grey-MTAFlow (GMF), White-MTAFlow (WMF), TotalFill BC Sealer (TF), and TotalFill BC Sealer HiFlow (TFHF) at different time moments—30 min, 24 h, and 28 days. Ten specimens of each material were prepared according to the ISO-6876:2012 standard and radiographed next to an aluminum step wedge using a digital sensor. The specimens were stored in a gelatinized Hank’s balanced salt solution at 37 °C between assessments. The mean grayscale values of each specimen were converted into equivalent aluminum thickness by a linear regression model. Characterization of the surface morphology was performed by using a scanning electron microscope at ×4.0k and ×10.0k magnifications. The radiographic analysis revealed that all the tested materials exceeded the ISO-specified limit of 3 mm Al, with the highest radiopacity presented by AHPB and the lowest by BD. None of the tested materials demonstrated considerable variances between the 30 min and the 24 h radiopacity level (p < 0.05), and statistically significant long-term radiopacity changes were exhibited by BR, TFHF, and TF (p > 0.05). All the specimens demonstrated a common feature of limited precipitate formation, with numerous unreacted particles still presented on the surface after 24 h, whereas the particle rearrangement and the deposition of precipitates were clearly observed after 28 days.

Biocompatibility of a New Calcium Silicate-Based Root Canal Sealer Mediated via the Modulation of Macrophage Polarization in a Rat Model

(1) Background: The EndoSequence BC Sealer HiFlow (Brasseler, Savannah, GA, USA) has recently been introduced in clinical applications. Thus, the aims of the present study are to determine its biocompatibility in vivo and to examine its ability to drive macrophage polarization in vitro and in vivo. (2) Methods: HiFlow was implanted into rat connective tissue for 7, 30 and 150 days. The microstructures and elemental compositions were determined by scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX). Hematoxylin–eosin, immunofluorescence, RT–qPCR and flow cytometry were used to elucidate the effects on inflammatory responses and macrophage polarization. (3) Results: SEM-EDX revealed the formation of surface hydroxyapatite crystal layers. Histological evaluation showed that HiFlow exhibited long-term biocompatibility because it decreased inflammatory responses and reduced the number of macrophages over time; however, tissue necrosis was observed in all the groups. RT–qPCR verified that HiFlow regulated the expression of inflammatory factors to inhibit the inflammatory response. Immunofluorescence analysis performed on in vivo samples revealed that HiFlow promoted M2-like macrophage polarization, and these results were confirmed by flow cytometry in vitro. (4) Conclusion: After 150 days of investigation, HiFlow was considered biologically acceptable, and the formation of apatite crystal layers and the promotion of M2-like macrophage polarization may contribute to its favorable biocompatibility.