Characterization of Sphingomonas sp. JB13 exo-inulinase: a novel detergent-, salt-, and protease-tolerant exo-inulinase

Deletion of the Loop Linking Two Domains of Exo-Inulinase InuAMN8 Diminished the Enzymatic Thermo-Halo-Alcohol Tolerance

Inulin is the rich water-soluble storage polysaccharide after starch in nature, and utilization of inulin through hydrolysis of exo-inulinases has attracted much attention. Thermo-halo-alcohol tolerance is essential for exo-inulinase applications, while no report reveals the molecular basis involved in halo-alcohol tolerance of exo-inulinases via experimental data. In this study, two loops of exo-inulinase InuAMN8, including the loop built with ³⁶⁰GHVRLGPQP³⁶⁸ linking domains of Glyco_hydro_32N and Glyco_hydro_32C and another loop built with ¹⁶⁹GGAG¹⁷² in the catalytic domain, were deleted to generate mutants MutG360Δ9 and MutG169Δ4, respectively. After heterologous expression, purification, and dialysis, InuAMN8, MutG169Δ4, and MutG360Δ9 showed half-lives of 144, 151, and 7 min at 50°C, respectively. InuAMN8 and MutG169Δ4 were very stable, while MutG360Δ9 showed a half-life of approximately 60 min in 5.0% (w/v) NaCl, and they showed half-lives of approximately 60 min in 25.0, 25.0, and 5.0% (w/v) ethanol, respectively. Structural analysis indicated that two cation-π bonds, which contributed to thermal properties of InuAMN8 at high temperatures, broke in MutG360Δ9. Four basic amino acid residues were exposed to the structural surface of MutG360Δ9 and formed positive and neutral electrostatic potential that caused detrimental effects on halo-alcohol tolerance. The study may provide a better understanding of the loop-function relationships that are involved in thermo-halo-alcohol adaptation of enzymes in extreme environment.

Efficient production of inulo-oligosaccharides from inulin by exo- and endo-inulinase co-immobilized onto a self-assembling protein scaffold

Inulin can be hydrolyzed by inulinases to yield inulo-oligosaccharides (IOSs), which have great application potential in the food and nutraceutical industries. However, conventional enzymatic production of IOSs is limited by long hydrolysis times and poor thermo-stability of inulinases. Here, the self-assembling protein scaffold EutM was engineered to co-immobilize exo-inulinase (EXINU) and endo-inulinase (ENINU) for synergistic hydrolysis of inulin to produce IOSs with 3 to 5 monosaccharide units (DP3-5 IOSs). The immobilization of EXINU/ENINU onto the EutM scaffold resulted in an increase of catalytic efficiency, a 65% increase of the V_max of ENINU, as well as an increase of thermo-stability, with 4.26-fold higher residual activity of EXINU after 22 h-incubation at 50 °C. After optimization, two efficient production protocols were obtained, in which the yield and productivity of DP3-5 IOSs reached 80.38% and 70.86 g·(L·h)^-1, respectively, which were at a high level in similar studies. Overall, this study provides an attractive self-assembling protein platform for the co-immobilization of inulinases, as well as optimized bioprocesses with great promise for the industrial production of DP3-5 IOSs.

Evaluation of carbon sources for the production of inulinase by Aspergillus niger A42 and its characterization

Inulinases are used for the production of high-fructose syrup and fructooligosaccharides, and are widely utilized in food and pharmaceutical industries. In this study, different carbon sources were screened for inulinase production by Aspergillus niger in shake flask fermentation. Optimum working conditions of the enzyme were determined. Additionally, some properties of produced enzyme were determined [activation (E_a)/inactivation (E_ia) energies, Q₁₀ value, inactivation rate constant (k_d), half-life (t_1/2), D value, Z value, enthalpy (ΔH), free energy (ΔG), and entropy (ΔS)]. Results showed that sugar beet molasses (SBM) was the best in the production of inulinase, which gave 383.73 U/mL activity at 30 °C, 200 rpm and initial pH 5.0 for 10 days with 2% (v/v) of the prepared spore solution. Optimum working conditions were 4.8 pH, 60 °C, and 10 min, which yielded 604.23 U/mL, 1.09 inulinase/sucrase ratio, and 2924.39 U/mg. Additionally, E_a and E_ia of inulinase reaction were 37.30 and 112.86 kJ/mol, respectively. Beyond 60 °C, Q₁₀ values of inulinase dropped below one. At 70 and 80 °C, t_1/2 of inulinase was 33.6 and 7.2 min; therefore, inulinase is unstable at high temperatures, respectively. Additionally, t_1/2, D, ΔH, ΔG values of inulinase decreased with the increase in temperature. Z values of inulinase were 7.21 °C. Negative values of ΔS showed that enzymes underwent a significant process of aggregation during denaturation. Consequently, SBM is a promising carbon source for inulinase production by A. niger. Also, this is the first report on the determination of some properties of A. niger A42 (ATCC 204,447) inulinase.

Glycoside Hydrolase Family 39 β-Xylosidase of Sphingomonas Showing Salt/Ethanol/Trypsin Tolerance, Low-pH/Low-Temperature Activity, and Transxylosylation Activity

Mining for novel enzymes from new microorganisms is a way to obtain β-xylosidases with promising applications. A Sphingomonas β-xylosidase was expressed in Escherichia coli. The purified recombinant enzyme (rJB13GH39) was most active at pH 4.5 and 50 °C, retaining 10%-50% of its maximum activity at 0-20 °C. Most salts and chemical reagents including 3.0%-20.0% (w/v) NaCl showed little or no effect on the enzymatic activity. rJB13GH39 exhibited 71.9% and 55.2% activity in 10.0% and 15.0% (v/v) ethanol, respectively. rJB13GH39 was stable below 60 °C in 3.0%-30.0% (w/v) NaCl, 3.0%-20.0% (v/v) ethanol, and 2.2-87.0 mg/mL trypsin. The enzyme transferred one xylosyl moiety to certain sugars and alcohols. The salt/ethanol tolerance and low-temperature activity of the enzyme may be attributed to its high structural flexibility caused by high proportions of small amino acids ACDGNSTV and random coils.

Partial purification and characterization of exoinulinase produced from Bacillus sp

Inulinase are industrial food enzymes which have gained much attention in recent scenario. In this study, Inulinase producing eight bacterial colonies were isolated and screened from three different plant root tubers soil sample. Among 8 inulinase producing colonies, the higher yielding colony was selected with 25.10 U/mL for further studies. The best inulinase producing colony was identified by partial 16S rRNA gene sequence as Bacillus sp. The crude inulinase was purified by using ammonium sulphate precipitation, dialysis and ion exchange chromatography on DEAE – sephacel and obtained 1.9 purification fold with total activity 293 U. The purified enzyme was subjected to characterization studies and it was found to be stable at 30–60 °C and optimum temperature was at 55 °C. The enzyme was stable at pH 3.0–7.0 and optimum pH was at 6.5. The K_m and V_max value for inulinase was found to be 0.117 mg/mL and 4.45 μmol min mg⁻¹ respectively, demonstrate its greater affinity. Hence, this enzyme can be widely used for the production of fructose, and fructooligosaccharides, which are important ingredients in food and pharmaceutical industry.

Distinctive molecular and biochemical characteristics of a glycoside hydrolase family 20 β-N-acetylglucosaminidase and salt tolerance

Background

Enzymatic degradation of chitin has attracted substantial attention because chitin is an abundant renewable natural resource, second only to lignocellulose, and because of the promising applications of N-acetylglucosamine in the bioethanol, food and pharmaceutical industries. However, the low activity and poor tolerance to salts and N-acetylglucosamine of most reported β-N-acetylglucosaminidases limit their applications. Mining for novel enzymes from new microorganisms is one way to address this problem.

Results

A glycoside hydrolase family 20 (GH 20) β-N-acetylglucosaminidase (GlcNAcase) was identified from Microbacterium sp. HJ5 harboured in the saline soil of an abandoned salt mine and was expressed in Escherichia coli. The purified recombinant enzyme showed specific activities of 1773.1 ± 1.1 and 481.4 ± 2.3 μmol min⁻¹ mg⁻¹ towards p-nitrophenyl β-N-acetylglucosaminide and N,N'-diacetyl chitobiose, respectively, a V_max of 3097 ± 124 μmol min⁻¹ mg⁻¹ towards p-nitrophenyl β-N-acetylglucosaminide and a K_i of 14.59 mM for N-acetylglucosamine inhibition. Most metal ions and chemical reagents at final concentrations of 1.0 and 10.0 mM or 0.5 and 1.0% (v/v) had little or no effect (retaining 84.5 − 131.5% activity) on the enzyme activity. The enzyme can retain more than 53.6% activity and good stability in 3.0–20.0% (w/v) NaCl. Compared with most GlcNAcases, the activity of the enzyme is considerably higher and the tolerance to salts and N-acetylglucosamine is much better. Furthermore, the enzyme had higher proportions of aspartic acid, glutamic acid, alanine, glycine, random coils and negatively charged surfaces but lower proportions of cysteine, lysine, α-helices and positively charged surfaces than its homologs. These molecular characteristics were hypothesised as potential factors in the adaptation for salt tolerance and high activity of the GH 20 GlcNAcase.

Conclusions

Biochemical characterization revealed that the GlcNAcase had novel salt–GlcNAc tolerance and high activity. These characteristics suggest that the enzyme has versatile potential in biotechnological applications, such as bioconversion of chitin waste and the processing of marine materials and saline foods. Molecular characterization provided an understanding of the molecular–function relationships for the salt tolerance and high activity of the GH 20 GlcNAcase.

Electronic supplementary material

The online version of this article (doi:10.1186/s12896-017-0358-1) contains supplementary material, which is available to authorized users.

A panorama of bacterial inulinases: Production, purification, characterization and industrial applications

Inulinases are important hydrolysing enzymes which specifically act on β-2, 1 linkages of inulin to produce fructose or fructooligosaccharides. Fungi, yeasts and bacteria are the potent microbial sources of inulinases. The data on bacterial inulinases is scarce as compared to other microbial sources. Inulinases yield from bacteria is very less as compared to fungal and yeast sources of inulinases. Submerged fermentation (SmF) is the method of choice for the production of inulinases from bacterial sources. Moreover, inulin is a potent substrate for the production of inulinases in SmF. Many bacterial inulinases have been reported to display magnificent environment abiding features and variability in their biophysical and biochemical properties. These properties have attracted intention of many researchers towards exploring adverse ecological niches for more distinctive inulinase producing bacterial strains. Inulinases are substantially important in current biotechnological era due to their numerous industrial applications. High fructose syrup and fructooligosaccharides are two major industrial applications of inulinases. Additionally, there are many reports on the production of various metabolites like citric acid, lactic acid, ethanol, biofuels, butanediol etc. using mixed cultures of inulinase producing organisms with other microorganisms. The present review mainly envisages inulinase producing bacterial sources, inulinase production, purification, characterization and their applications.

Expression of exo-inulinase gene from Aspergillus niger 12 in E. coli strain Rosetta-gami B (DE3) and its characterization

Inulin is a linear carbohydrate polymer of fructose subunits (2-60) with terminal glucose units, produced as carbon storage in selected plants. It cannot directly be taken up by most microorganisms due to its large size, unless prior hydrolysis through inulinase enzymes occurs. The hydrolyzed inulin can be taken up by microbes and/or recovered and used industrially for the production of high fructose syrup, inulo-oligosaccharides, biofuel, and nutraceuticals. Cell-free enzymatic hydrolysis would be desirable for industrial applications, hence the recombinant expression, purification and characterization of an Aspergillus niger derived exo-inulinase was investigated in this study. The eukaroyototic exo-inulinase of Aspergillus niger 12 has been expressed, for the first time, in an E. coli strain [Rosetta-gami B (DE3)]. The molecular weight of recombinant exo-inulinase was estimated to be ∼81 kDa. The values of Km and Vmax of the recombinant exo-inulinase toward inulin were 5.3 ± 1.1 mM and 402.1 ± 53.1 µmol min(-1)  mg(-1) protein, respectively. Towards sucrose the corresponding values were 12.20 ± 1.6 mM and 902.8 ± 40.2 µmol min(-1)  mg(-1) protein towards sucrose. The S/I ratio was 2.24 ± 0.7, which is in the range of native inulinase. The optimum temperature and pH of the recombinant exo-inulinase towards inulin was 55°C and 5.0, while they were 50°C and 5.5 towards sucrose. The recombinant exo-inulinase activity towards inulin was enhanced by Cu(2+) and reduced by Fe(2+) , while its activity towards sucrose was enhanced by Co(2+) and reduced by Zn(2+) . © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:629-637, 2016.

Sphingomonas panacis sp. nov., isolated from rhizosphere of rusty ginseng

The type strain DCY99(T) was isolated from soil collected from a ginseng field in Hwacheon, Republic of Korea. Strain DCY99(T) is Gram-negative, non-spore forming, motile, rod-shaped, and strictly aerobic. The bacteria grow optimally at 25-30 °C and pH 6.0-6.5. Phylogenetically, strain DCY99(T) is most closely related to Sphingomonas oligophenolica JCM 12082(T), followed by Sphingomonas asaccharolytica KCTC 2825(T), Sphingomonas mali KCTC 2826(T), Sphingomonas cynarae JCM17498(T), Sphingomonas pruni KCTC 2824(T), and Sphingomonas glacialis DSM 22294(T). The DNA-DNA relatedness between strain DCY99(T) and S. oligophenolica JCM 12082(T) was 15.6 ± 0.4 %, and the DNA G+C content of strain DCY99(T) was 64.4 mol%. An isoprenoid quinone was detected and identified as ubiquinone Q-10, and sym-homospermidine was identified as the major polyamine of DCY99(T). The major polar lipids were identified as sphingoglycolipid, diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylglycerol, and phosphatidylcholine. C14:02OH, C16:0, and summed feature 8 (C18:1 ω7c:/C18:1 ω6c) were identified as the major fatty acids present in DCY99(T). The results of physiological and biochemical tests allowed strain DCY99(T) to be differentiated phenotypically from other recognized species belonging to the genus Sphingomonas. Therefore, it is suggested that the newly isolated organism represents a novel species, for which the name Sphingomonas panacis sp. nov. is proposed with the type strain designated as DCY99(T) (=JCM 30806(T) =KCTC 42347(T)).