Effect of strain on the electronic structure and optical properties of Cr-doped monolayer MoS2

Electronic structure and optical properties of nitrogen-doped antimonene under biaxial strain: first-principles study

CONTENT

In this thesis, the role of N atom doping and biaxial strain in modulating the electronic structure and optical properties of antimonene has been deeply investigated using a first-principles approach based on density-functional theory. The results show that N doping significantly reduces the band gap of antimonene and introduces new electronic states, thus affecting its electronic structure. In terms of optical properties, N doping reduces the static permittivity of antimonene and alters its absorption, reflection, and energy loss properties. In addition, biaxial strain further enhanced the modulation effect of these properties. This study not only provides theoretical support for the application of antimonene in the field of high-performance two-dimensional electronic and optoelectronic devices, but also reveals strain and doping as an effective means to modulate the physical properties of two-dimensional materials.

METHODS

For the calculations, we used the DFT-based CASTEP software package for the simulation of the electronic structure. In order to more accurately characterize the weak interactions between two-dimensional materials, we specifically introduced the Van der Waals dispersion correction. We have chosen the Perdew-Burke-Ernzerhof (PBE) exchange-correlation generalization under the generalized gradient approximation (GGA) and combined it with the Van der Waals correction term in order to fully consider the electronic structure of antimonene. For the calculation parameter settings, we set the truncation energy to 400 eV to ensure the accuracy of the calculation. Meanwhile, we adopt a 6 × 6 × 1 k-point grid for Brillouin zone sampling to obtain more accurate energy band structure and density of states information. For the convergence settings, the convergence criteria for both the system energy and the interaction force between atoms were set to 1 × 10-5 eV and 0.01 eV/Å, respectively. We selected a 3 × 3 × 1 supercell model with 18 Sb atoms. A vacuum thickness of 18 Å was established in the Z direction, which is sufficient to avoid interactions between the two atomic layers above and below the periodic structure.

Effect of compressive strain on electronic and optical properties of Cr-doped monolayer WS2

CONTEXT

The electronic properties and optical properties of Cr-doped monolayer WS2 under uniaxial compressive deformation have been investigated based on density functional theory. In terms of electronic structure properties, both intrinsic and doped system bandgaps decrease with the increase of compression deformation, and the values of the bandgap under the same compression deformation after Cr doping are reduced compared with the corresponding intrinsic states. When the compressive deformation reaches 10%, both the intrinsic and doped system band gaps are close to zero. New electronic states and impurity energy levels appear in the WS2 system when doped with Cr atoms. For the optical properties, the calculation and analysis of the dielectric function under each deformation regime of monolayer WS2 show that the compression deformation affects the dielectric function, and when the compression deformation is 10%, the un-doped and Cr-doped regimes show a decrease in ε1(ω) compared to the compression deformation of 8%. For each deformation system, the peak reflections occur in the ultraviolet region. Near the position where the second peak of the absorption spectrum appears, it can be seen that the ability of each system to absorb light gradually decreases with the increase of the amount of deformation and appears to be red-shifted to varying degrees.

METHODS

This study follows the initial principles of the density functional theory framework and is based on the CASTEP module of Materials-Studio software GGA and PBE generalizations are used to perform computations such as geometry optimization of the model. We have calculated the energy band structure of monolayer WS2 with intrinsic and compressive deformations of 2% and 4% using PBE and HSE06, respectively. The band gap values calculated using PBE are 1.802 eV, 1.663 eV, and 1.353 eV, respectively, and the band gap values calculated with HSE06 are 2.267 eV, 2.034 eV, 1.751 eV. The results show that the bandgap values calculated by HSE06 are significantly higher than those calculated by PBE, but the bandgap variations calculated by the two methods have the same trend, and the shape characteristics of the energy band structure are also the same. However, it is worth noting that the computation time required for the HSE06 calculation is much longer than that of the PBE, which is far beyond the capability of our computer hardware, and the purpose of this paper is to investigate the change rule of the effect of deformation on the bandgap value, so to save the computational resources, the next calculations are all calculated using the PBE. The Monkhorst-Pack special K-point sampling method is used in the calculations. The cutoff energy for the plane wave expansion is 400 eV, and the K-point grid is assumed to be 5 × 5 × 1. Following geometric optimization, the iterative precision converges to a value of less than 0.03 eV/Å for all atomic forces and at least 1 × 10-5 eV/atom for the total energy of each atom. The vacuum layer's thickness was selected at 20 Å to mitigate the impact of the interlayer contact force.

First principle study of the effect of doping on the optoelectronic properties of Cr-adsorbed MoS2

CONTEXT

This study explores, for the first time, using first principles, the impact of substitutional doping with boron (B), carbon (C), and nitrogen (N) on the adsorption of chromium (Cr) on monolayer MoS2. The effects of doping on the Cr adsorption behavior of MoS2 were investigated using four MoS2 systems, namely, pure, boron (B)-doped, carbon (C)-doped, and nitrogen (N)-doped, in order to gain an in-depth understanding of the mechanism of the effects of doping on the electronic structure and optical properties of Cr adsorbed by MoS2, to optimize the properties of MoS2, to explore new areas of application, and to promote the development of materials science. Four MoS2 adsorption systems of Cr adsorption on pure, B-doped, C-doped, and N-doped MoS2 were optimized, and the optimized results showed that the stable adsorption location of Cr on both pure and doped MoS2 was the hollow location at the top of the folded hexagon. The findings reveal that pure MoS2 has an adsorption effect on Cr, and doped elements B, C, and N can promote the adsorption of Cr on MoS2, and the strong and weak order of this promotion is B > C > N.

METHODS

In this paper, we use the CASTEP module in the simulation software Materials Studio to perform simulation calculations and analyses to optimize the simulation of Cr adsorption by MoS2 doped with B, C, and N atoms using the generalized gradient approximation (GGA) plane-wave pseudo-potential method (Perdew et al. Phys Rev Lett 77(18):3865-3968, 1996), as well as Perdew-Burke-Ernzerhof (PBE) generalized functionals (Segall et al. J Phys: Condens Matter 14(11):2717-2744, 2022). The convergence test reveals that it is more reasonable to set the K-point network to 3 × 3 × 1 and the truncation energy to 400 eV. In this paper, a 3 × 3 × 1 supercell structure with 18 S atoms and 9 Mo atoms is selected. The convergence value of the iteration accuracy is 1.0e - 5eV/atom, and all the atomic forces are less than 0.02eV/Å. Additionally, to prevent MoS2 interlayer interaction, a vacuum layer with a thickness of 18 Å is set in the C direction. The geometrical optimization of the model is performed first, and then the corresponding adsorption energies of the model and the nature of the electronic structure are analyzed.