[The FAMI screw for temporary intermaxillary fixation. Report of experiences for extending indications]

The Use of MMF Screws: Surgical Technique, Indications, Contraindications, and Common Problems in Review of the Literature

Mandibulo-maxillary fixation (MMF) screws are inserted into the bony base of both jaws in the process of fracture realignment and immobilisation. The screw heads act as anchor points to fasten wire loops or rubber bands connecting the mandible to the maxilla. Traditional interdental chain-linked wiring or arch bar techniques provide the anchorage by attached cleats, hooks, or eyelets. In comparison to these tooth-borne appliances MMF screws facilitate and shorten the way to achieve intermaxillary fixation considerably. In addition, MMF screws help to reduce the hazards of glove perforation and wire stick injuries. On the downside, MMF screws are attributed with the risk of tooth root damage and a lack of versatility beyond the pure maintenance of occlusion such as stabilizing loose teeth or splinting fragments of the alveolar process. The surgical technique of MMF screws as well as the pros and cons of the clinical application are reviewed. The adequate screw placement to prevent serious tooth root injuries is still an issue to rethink and modify conceptual guidelines.

Biomechanical comparison of four different miniscrew types for skeletal anchorage in the mandibulo-maxillary area

This study compared four miniscrew types for skeletal anchorage (Aarhus, FAMI, Dual Top and Spider) regarding their biomechanical properties contributing to primary stability. Insertion torque measurements and pull-out tests in axial (0 degrees ) as well as in the 20 degrees and 40 degrees direction were performed. Stiffness of the screw-bone construct was calculated from the load-displacement curve. Conic FAMI and Dual Top screws had higher insertion torques. Insertion torques were raised by drill-free insertion of FAMI and Dual Top screws. Statistically significant differences were found between the 4 screw types in pull-out tests. The highly significant differences between the four screws for peak load in the axial (0 degrees ) and 20 degrees direction were not apparent in 40 degrees angular loads. For the conical screws, peak load values increased in angular compared with axial load. The Dual Top screw achieved the highest values for peak load and stiffness. 12 Dual Top and 1 Spider screw heads fractured in the pull-out tests. A conical drill-free screw design achieves higher primary stability compared with cylindrical self-tapping screws. This effect was more obvious in insertion torque estimations rather than in pull-out tests. The Dual Top screws, although biomechanically superior to other screw types, were most prone to fractures.