Electrochemically formed fullerene-based polymeric films

Investigation of Magnetic Electrodes in Conducting Polymeric Materials: Electrochemical Properties of a Fullerene[C60 ]-Pd Polymer and Iron Oxide Magnetic Nanocomposite

A composite of iron oxide magnetic nanoparticles and coordination fullerene polymer (C60 Pd3 )n is formed by chemical deposition of spherical polymer nanoparticles on iron oxide magnetic nanoparticles in benzene containing C60 and Pd(0) complex. The composition of the composite can be controlled by the amount of magnetite and concentration of polymerization precursors as well as the time of polymerization. The magnetic composite material Fe3 O4 -γFe2 O3 /(C60 Pd3 )n is used as a model system to investigate its deposition on a magnetic electrode and its electrochemical properties. The iron oxide magnetic nanoparticles ensure both the magnetic activity of the composite and its nanostructured morphology. Both of these factors are responsible for the enhancement of the electrochemical activity of the polymer phase forming the composite in comparison to the pure polymer material deposited on the same magnetic electrode. In the magnetic field of the electrode, the composite undergoes permanent and strong bonding with the surface of the electrode. The nanostructured morphology of the Fe3 O4 -γFe2 O3 /(C60 Pd3 )n composite also provides very good capacitive properties.

[2 + 1] Cycloaddition reactions of fullerene C60 based on diazo compounds

The most common variant of fullerene core functionalization is the [2 + 1] cycloaddition process. Of these, reactions leading to methanofullerenes are the most promising. They are synthesized in two main reactions: nucleophilic cyclopropanation according to the Bingel method and thermal addition of diazo compounds. This present review summarizes the material on the synthesis of monofunctionalized methanofullerenes - analogues of [60]PCBM - based on various diazo compounds. The main cyclopropanating agents for the synthesis of monosubstituted methanofullerenes, the optimal conditions and the mechanism of the [2 + 1] cycloaddition, as well as the practical application of the target products are analyzed.

Application of Zero-Dimensional Nanomaterials in Biosensing

Zero-dimensional (0D) nanomaterials, including graphene quantum dots (GQDs), carbon quantum dots (CQDs), fullerenes, inorganic quantum dots (QDs), magnetic nanoparticles (MNPs), noble metal nanoparticles, upconversion nanoparticles (UCNPs) and polymer dots (Pdots), have attracted extensive research interest in the field of biosensing in recent years. Benefiting from the ultra-small size, quantum confinement effect, excellent physical and chemical properties and good biocompatibility, 0D nanomaterials have shown great potential in ion detection, biomolecular recognition, disease diagnosis and pathogen detection. Here we first introduce the structures and properties of different 0D nanomaterials. On this basis, recent progress and application examples of 0D nanomaterials in the field of biosensing are discussed. In the last part, we summarize the research status of 0D nanomaterials in the field of biosensing and anticipate the development prospects and future challenges in this field.

Nucleophilic cyclopropanation of [60]fullerene by the addition–elimination mechanism

Information on the synthesis of monofunctionalized methanofullerenes C₆₀ obtained by the addition–elimination mechanism is generalized. The main reagents for cyclopropanation, mechanisms and optimal conditions for the processes, and the prospects for practical application of the products are considered.

Generalized material on the synthesis of monosubstituted methanofullerenes C₆₀, obtained by the addition–elimination mechanism.

Fullerene derived molecularly imprinted polymer for chemosensing of adenosine-5'-triphosphate (ATP)

For molecular imprinting of oxidatively electroactive analytes by electropolymerization, we used herein reductively electroactive functional monomers. As a proof of concept, we applied C60 fullerene adducts as such for the first time. For that, we derivatized C60 to bear either an uracil or an amide, or a carboxy addend for recognition of the adenosine-5'-triphosphate (ATP) oxidizable analyte with the ATP-templated molecularly imprinted polymer (MIP-ATP). Accordingly, the ATP complex with all of the functional monomers formed in solution was potentiodynamically electropolymerized to deposit an MIP-ATP film either on an Au electrode of the quartz crystal resonator or on a Pt disk electrode for the piezoelectric microgravimetry (PM) or capacitive impedimetry (CI) determination of ATP, respectively, under the flow-injection analysis (FIA) conditions. The apparent imprinting factor for ATP was ∼4.0. After extraction of the ATP template, analytical performance of the resulting chemosensors, including detectability, sensitivity, and selectivity, was characterized. The limit of detection was 0.3 and 0.03mM ATP for the PM and CI chemosensor, respectively. The MIP-ATP film discriminated structural analogues of ATP quite well. The Langmuir, Freundlich, and Langmuir-Freundlich isotherms were fitted to the experimental data of the ATP sorption and sorption stability constants appeared to be nearly independent of the adopted sorption model.

Metal-containing polymers via electropolymerization

Electropolymerization represents a suitable and well-established approach for the assembly of polymer structures, in particular with regard to the formation of thin, insoluble films. Utilization of monomers that are functionalized with metal complex units allows the combination of structural and functional benefits of polymers and metal moieties. Since a broad range of both electropolymerizable monomers and metal complexes are available, various structures and, thus, applications are possible. Recent developments in the field of synthesis and potential applications of metal-functionalized polymers obtained via electropolymerization are presented, highlighting the significant advances in this field of research.

Metallocene-containing conjugated polymers

The paper gives a review of publications on polymers with conjugated matrices (PPy, PTh, PAni, hydrocarbon or mixed chains...) which incorporate metallocene complexes (Fe, Ru, Co; Ni, Ti, Zr, Ta) with two cyclopentadienyl ligands (Cp) and their derivatives, in particular with methylated cyclopentadienyl rings (Cp*), as well as hemi-metallocene complexes (Fe, Ru, Co, Mn), as pendant groups or inside the principal chain (part B). The information on related short-chain systems, monomers and oligomers, is also included. In part A, a brief overview of various conjugated polymer materials is presented, with their classification in accordance with the conductivity mechanism (ionic, electronic or mixed conductors) or with the structural type (linear-chain organic or mixed polymers, derivatization, metallopolymers, multi-dimensional structures, alternating and block copolymers with organic or mixed units, hybrid materials with a mixture of conjugated and inert polymers, polymers inside a solid matrix, conjugated polymers with incorporated nanoelements of transition metals, carbon, semiconductors etc.