Development of a novel nitrite amperometric sensor based on poly(toluidine blue) film electrode

Electrochemical Sensors Based on Conducting Polymers for the Aqueous Detection of Biologically Relevant Molecules

Electrochemical sensors appear as low-cost, rapid, easy to use, and in situ devices for determination of diverse analytes in a liquid solution. In that context, conducting polymers are much-explored sensor building materials because of their semiconductivity, structural versatility, multiple synthetic pathways, and stability in environmental conditions. In this state-of-the-art review, synthetic processes, morphological characterization, and nanostructure formation are analyzed for relevant literature about electrochemical sensors based on conducting polymers for the determination of molecules that (i) have a fundamental role in the human body function regulation, and (ii) are considered as water emergent pollutants. Special focus is put on the different types of micro- and nanostructures generated for the polymer itself or the combination with different materials in a composite, and how the rough morphology of the conducting polymers based electrochemical sensors affect their limit of detection. Polypyrroles, polyanilines, and polythiophenes appear as the most recurrent conducting polymers for the construction of electrochemical sensors. These conducting polymers are usually built starting from bifunctional precursor monomers resulting in linear and branched polymer structures; however, opportunities for sensitivity enhancement in electrochemical sensors have been recently reported by using conjugated microporous polymers synthesized from multifunctional monomers.

Preparation of Free-Standing and Flexible Graphene/Ag Nanoparticles/Poly(pyronin Y) Hybrid Paper Electrode for Amperometric Determination of Nitrite

A flexible and free-standing graphene-based hybrid paper was successfully fabricated by successive applications of vacuum filtration and electropolymerization. First, a suspension including graphene oxide (GO) and silver nanoparticles (AgNPs) was prepared, and GO/AgNPs paper was obtained by vacuum-filtration of this suspension through a membrane. This GO/AgNPs paper was transformed to rGO/AgNPs paper by using both chemical reduction with HI and thermal annealing procedures. rGO/AgNPs/poly(PyY) hybrid paper electrode was formed by electropolymerization of Pyronin Y (PyY) on rGO/AgNPs paper electrode from a PyY monomer-containing (pH 1.0) solution. Structural, chemical, and morphological characterization of this hybrid paper was carried out by scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Raman spectroscopy, infrared spectroscopy, UV-vis absorption spectroscopy, four-point probe conductivity measurement, and cyclic voltammetry techniques. Electrooxidation of nitrite on rGO/AgNPs/poly(PyY) hybrid paper electrode has been achieved at 860 mV with a linear range of 0.1-1000 μM, sensitivity of 13.5 μAμM(-1)cm(-2), and a detection limit of 0.012 μM. Amperometry studies have shown that the hybrid paper electrode is suitable for amperometric determination of nitrite in both standard laboratory samples and real samples. Moreover, this paper electrode selectively detects nitrite even in the presence of 100-fold common ions and exhibits an excellent operational stability and good flexibility.

A non-covalent interaction of Schiff base copper alanine complex with green synthesized reduced graphene oxide for highly selective electrochemical detection of nitrite

A novel and selective nitrite sensor based on non-covalent interaction of Schiff base copper complex [Cu(sal-ala)(phen)] with reduced graphene oxide (RGO) was developed by simple eco-friendly approach.

An electropolymerized Nile Blue sensing film-based nitrite sensor and application in food analysis

This paper reports a poly-Nile Blue (PNB) sensing film based electrochemical sensor and the application in food analysis as a possible alternative for electrochemical detection of nitrite. The PNB-modified electrode in the sensor was prepared by in situ electropolymerization of Nile Blue at a prepolarized glassy carbon (GC) electrode and then characterized by cyclic voltammetry (CV) and pulse voltammetry in phosphate buffer (pH 7.1). Several key operational parameters affecting the electrochemical response of PNB sensing film were examined and optimized, such as polarization time, PNB film thickness and electrolyte pH values. As the electroactive PNB sensing film provides plenty of active sites for anodic oxidation of nitrite, the nitrite sensor exhibited high performance including high sensitivity, low detection limit, simple operation and good stability at the optimized conditions. The nitrite sensor revealed good linear behavior in the concentration range from 5.0x10(-7) mol L(-1) to 1.0x10(-4) mol L(-1) for the quantitative analysis of nitrite anion with a limit of detection of 1.0x10(-7) mol L(-1). Finally, the application in food analysis using sausage as testing samples was investigated and the results were consistent with those obtained by standard spectrophotometric method.