Anodic oxidation of the Ti–13Nb–13Zr alloy

Effect of the Synergistic Interaction of Micro- and Nanostructures with Silver Ions on the Biocompatibility and Antimicrobial Properties of Ti-15Mo-2.5Ag

Titanium and titanium alloys have the advantages of a low density and a close elastic modulus to natural bone, which can reduce the stress-shielding effect and become one of the first choices for human hard tissue replacement and repair. However, implant site infection is still one of the main reasons for implantation failure. In this paper, 2.5 wt % Ag element was added to Ti-15Mo to obtain a low modulus, and a surface anodization was applied to improve the surface biocompatibility. The elastic modulus, micromorphology, surface elemental valence, corrosion resistance, antimicrobial properties, and cytocompatibility were investigated by mechanical tests, scanning electron microscopy, X-ray photoelectron spectroscopy, electrochemical tests, inductively coupled plasma spectroscopy, plate counting method, and cellular tests. The experimental results showed that the anodized Ti-15Mo-2.5Ag sample exhibited an elastic modulus of 79 GPa, a strong corrosion resistance, a strong antimicrobial ability of ≥99.99%, and good biocompatibility. It was demonstrated that the formation of Ag2O on the surface and Ag ion release improved the antimicrobial properties and that the structural synergism of silver ions with micro- and nanostructures played an important role in promoting the early spreading of cells and improving the cytocompatibility.

Cubic Silver Nanoparticles Fixed on TiO2 Nanotubes as Simple and Efficient Substrates for Surface Enhanced Raman Scattering

In this work we show that ordered freestanding titanium oxide nanotubes (TiO₂ NT) may be used as substrates for the simple and efficient immobilization of anisotropic plasmonic nanoparticles. This is important because anisotropic plasmonic nanostructures usually give greater spectral enhancement than spherical nanoparticles. The size of the pores in a layer of titanium oxide nanotubes can be easily fitted to the size of many silver plasmonic nanoparticles highly active in SERS (surface-enhanced Raman scattering) spectroscopy (for example, silver nanocubes with an edge length of ca. 45 nm), and hence, the plasmonic nanoparticles deposited can be strongly anchored in such a titanium oxide substrate. The tubular morphology of the TiO₂ substrate used allows a specific arrangement of the silver plasmonic nanoparticles that may create many so-called SERS hot spots. The SERS activity of a layer of cubic Ag nanoparticles (AgCNPs) deposited on a tubular TiO₂ substrate (AgCNPs@TiO₂ NT) is about eight times higher than that of the standard electrochemically nanostructured surface of a silver electrode (produced by oxidation reduction cycling). Furthermore, a super hydrophilic character of the TiO₂ nanotubes surface allows for a uniform distribution of AgCNPs, which are deposited from an aqueous suspension. The new AgCNPs@TiO₂ NT hybrid layer ensures a good reproducibility of SERS measurements and exhibits a higher temporal stability of the achievable total SERS enhancement factor—one that is far better than standard SERS silver substrates. To characterize the morphology and chemical composition of such evidently improved SERS platforms thus received, we applied microscopic techniques (SEM, and scanning transmission electron microscopy (STEM)) and surface analytical techniques (Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS)).

Electrochemical Impedance and Polarization Corrosion Studies of Tantalum Surface Modified by DC Plasma Electrolytic Oxidation

Tantalum has recently become an actively researched biomaterial for the bone reconstruction applications because of its excellent corrosion resistance and successful clinical records. However, a bare Ta surface is not capable of directly bonding to the bone upon implantation and requires some method of bioactivation. In this study, this was realized by direct current (DC) plasma electrolytic oxidation (PEO). Susceptibility to corrosion is a major factor determining the service-life of an implant. Therefore, herein, the corrosion resistance of the PEO coatings on Ta was investigated in Ringer’s solution. The coatings were formed by galvanostatic anodization up to 200, 300 and 400 V, after which the treatment was conducted potentiostatically until the total process time amounted to 5 min. Three solutions containing Ca(H₂PO₂)₂, Ca(HCOO)₂ and Mg(CH₃COO)₂ were used in the treatment. For the corrosion characterization, electrochemical impedance spectroscopy and potentiodynamic polarization techniques were chosen. The coatings showed the best corrosion resistance at voltages low enough so that the intensive sparking was absent, which resulted in the formation of thin films. The impedance data were fitted to the equivalent electrical circuits with two time constants, namely R(Q[R(QR)]) and R(Q[R(Q[RW])]). The inclusion of W in the circuit helped to fit the low-frequency part of the samples PEO-ed at 400 V, hinting at the important role of diffusion in the corrosion resistance of the PEO coatings described in the research.