Oxygen electroreduction on polycrystalline gold electrodes and on gold nanoparticle-modified glassy carbon electrodes

Evaluation of electrodeposition synthesis of gold nanodendrite on screen-printed carbon electrode for nonenzymatic ascorbic acid sensor

Gold nanodendrite (AuND) is a type of gold nanoparticles with dendritic or branching structures that offers advantages such as large surface area and high conductivity to improve electrocatalytic performance of electrochemical sensors. AuND structures can be synthesized using electrodeposition method utilizing cysteine as growth directing agent. This method can simultaneously synthesize and integrate the gold nanostructures on the surface of the electrode. We conducted a comprehensive study on the synthesis of AuND on screen-printed carbon electrode (SPCE)-based working electrode, focusing on the optimization of electrodeposition parameters, such as applied potential, precursor solution concentration, and deposition time. The measured surface oxide reduction peak current and electrochemical surface area from cyclic voltammogram were used as the optimization indicators. We confirmed the growth of dendritic gold nanostructures across the carbon electrode surface based on FESEM, EDS, and XRD characterizations. We applied the SPCE/AuND electrode as a nonenzymatic sensor on ascorbic acid (AA) and obtained detection limit of 16.8 μM, quantification limit of 51.0 μM, sensitivity of 0.0629 μA μM-1, and linear range of 180-2700 μM (R2 value = 0.9909). Selectivity test of this electrode against several interferences, such as uric acid, dopamine, glucose, and urea, also shows good response in AA detection.

Innovative and efficient electroanalytical approach for determining persulfate in aqueous solutions using a gold electrode

Persulfate (PDS), peroxodisulfate, peroxydisulfate, peroxodisulfuric acid, is an oxidant that can be generated by direct oxidation of sulfate ions or indirectly via reaction with hydroxyl radicals in anodes with high oxygen overpotential. Quantitative methods for determining/quantifying PDS in the presence of other strong oxidants or other anions in eco-friendly applications do not give reliable results because of these interferents. Therefore, an additional method is needed to improve the efficacy to determine/quantify the PDS concentration in oxidative environments. In this frame, an alternative sensing approach was developed based on the electroreduction of PDS in the polycrystalline gold electrode using the square wave voltammetry (SWV) technique for its detection and quantification. Then, the procedure was evaluated in terms of its effectiveness for determining PDS in complex matrices, such as in the electrolysis of sulfate ion precursor solutions using anodes with high oxygen overpotential (e.g.: diamond electrode) capable of generating other strong oxidants. Based on the results obtained, it was confirmed that only the direct electron transfer step is attained when PDS is electrochemically synthetized at the surface of the polycrystalline gold electrode, contributing to its detection and quantification by SWV. It was also observed that at acidic conditions, the PDS electroreduction process is controlled by mass transfer while that the sensitivity for PDS detection is improved, achieving detection limits of about 14 and 19 μM for perchloric and sulfuric acids medium, respectively. When the electrolysis of sulfate-based solution at acidic conditions was performed to determine the electrochemical production of PDS by SWV approach with Au sensor, the concentration of PDS was effectively determined and no interferences were assessed by other strong oxidants generated during the electrolysis. Conversely, the spectrophotometric method showed that, the results of the PDS concentration were overestimated and other strong oxidants significantly interfere with its determination during the electrolysis of sulfuric acid solutions. Therefore, the electroanalytical method presented here is a suitable alternative for determining PDS during the applicability of the environmental-electrochemical technologies.

Surface Requirements for Optimal Biosensing with Disposable Gold Electrodes

Electrochemical biosensors are promising technologies for detection and monitoring in low-resource settings due to their potential for easy use and low-cost instrumentation. Disposable gold screen-printed electrodes (SPEs) are popular substrates for these biosensors, but necessary dopants in the ink used for their production can interfere with biosensor function and contribute to the heterogeneity of these electrodes. We recently reported an alternative disposable gold electrode made from gold leaf generated using low-cost, equipment-free fabrication. We have directly compared the surface topology, biorecognition element deposition, and functional performance of three disposable gold electrodes: our gold leaf electrodes and two commercial SPEs. Our leaf electrodes significantly outperformed the SPEs for reproducible and effective biosensing in a DNase I assay and are nearly an order of magnitude less expensive than the SPEs. Therefore, these electrodes are promising for further development as point-of-care diagnostics, especially in low-resource settings.

Nanostructured gold electrodes promote neural maturation and network connectivity

Progress in the clinical application of recording and stimulation devices for neural diseases is still limited, mainly because of suboptimal material engineering and unfavorable interactions with biological entities. Nanotechnology is providing upgraded designs of materials to better mimic the native extracellular environment and attain more intimate contacts with individual neurons, besides allowing for the miniaturization of the electrodes. However, little progress has been done to date on the understanding of the biological impact that such neural interfaces have on neural network maturation and functionality. In this work, we elucidate the effect of a gold (Au) highly ordered nanostructure on the morphological and functional interactions with neural cells and tissues. Alumina-templated Au nanostructured electrodes composed of parallel nanowires of 160 nm in diameter and 1.2 μm in length (Au-NWs), with 320 nm of pitch, are designed and characterized. Equivalent non-structured Au electrodes (Au-Flat) are used for comparison. By using diverse techniques in in vitro cell cultures including live calcium imaging, we found that Au-NWs interfaced with primary neural cortical cells for up to 14 days allow neural networks growth and increase spontaneous activity and ability of neuronal synchronization, thus indicating that nanostructured features favor neuronal network. The enhancement in the number of glial cells found is hypothesized to be behind these beneficial functional effects. The in vivo effect of the implantation of these nanostructured electrodes and its potential relevance for future clinical applicability has been explored in an experimental model of rat spinal cord injury. Subacute responses to implanted Au-NWs show no overt reactive or toxic biological reactions besides those triggered by the injury itself. These results highlight the translational potential of Au-NWs electrodes for in vivo applications as neural interfaces in contact with central nervous tissues including the injured spinal cord.

Effect of Particle Size on the Corrosion Behaviour of Gold in the Presence of Chloride Impurities: An EFC-ICP-MS Potentiodynamic Study

A profound understanding of the Au dissolution process is a prerequisite for optimal utilization of Au-based materials. This goes for either increasing the corrosion stability of materials in the sectors where the long-term functionality of Au is needed or decreasing the corrosion stability where the recovery of the Au component is crucial. By employing an extremely sensitive online analytical system, consisting of an electrochemical flow cell coupled to an inductively coupled plasma mass spectrometry, in situ potential-resolved dissolution of Au in the ppb range is enabled. A comparative study of two Au based materials, (i) a polycrystalline Au disk and (ii) carbon-supported Au nanoparticles, is presented. As a probe, chloride ions were used to elucidate the distinct differences in the corrosion behavior of the two analogues.