Electrochemical properties of diphosphonate-bridged palladacycles and their reactivity in arene phosphonation

Recent advances in electrochemical C-H phosphorylation

The activation of C-H bond, and its direct one-step functionalization, is one of the key synthetic methodologies that provides direct access to a variety of practically significant compounds. Particular attention is focused on modifications obtained at the final stages of the synthesis of complicated molecules, which requires high tolerance to the presence of existing functional groups. Phosphorus is an indispensable element of life, and phosphorus chemistry is now experiencing a renaissance due to new emerging applications in medicinal chemistry, materials chemistry (polymers, flame retardants, organic electronics, and photonics), agricultural chemistry (herbicides, insecticides), catalysis (ligands) and other important areas of science and technology. In this regard, the search for new, more selective, low-waste synthetic routes become relevant. In this context, electrosynthesis has proven to be an eco-efficient and convenient approach in many respects, where the reagents are replaced by electrodes, where the reactants are replaced by electrodes, and the applied potential the applied potential determines their "oxidizing or reducing ability". An electrochemical approach to such processes is being developed rapidly and demonstrates some advantages over traditional classical methods of C-H phosphorylation. The main reasons for success are the exclusion of excess reagents from the reaction system: such as oxidants, reducing agents, and sometimes metal and/or other improvers, which challenge isolation, increase the wastes and reduce the yield due to frequent incompatibility with these functional groups. Ideal conditions include electron as a reactant (regulated by applied potential) and the by-products as hydrogen or hydrocarbon. The review summarizes and analyzes the achievements of electrochemical methods for the preparation of various phosphorus derivatives with carbon-phosphorus bonds, and collects data on the redox properties of the most commonly used phosphorus precursors. Electrochemically induced reactions both with and without catalyst metals, where competitive oxidation of precursors leads to either the activation of C-H bond or to the generation of phosphorus-centered radicals (radical cations) or metal high oxidation states will be examined. The review focuses on publications from the past 5 years.

Advances on the Merger of Electrochemistry and Transition Metal Catalysis for Organic Synthesis

Synthetic organic electrosynthesis has grown in the past few decades by achieving many valuable transformations for synthetic chemists. Although electrocatalysis has been popular for improving selectivity and efficiency in a wide variety of energy-related applications, in the last two decades, there has been much interest in electrocatalysis to develop conceptually novel transformations, selective functionalization, and sustainable reactions. This review discusses recent advances in the combination of electrochemistry and homogeneous transition-metal catalysis for organic synthesis. The enabling transformations, synthetic applications, and mechanistic studies are presented alongside advantages as well as future directions to address the challenges of metal-catalyzed electrosynthesis.

Recent advances in organic electrosynthesis employing transition metal complexes as electrocatalysts

Organic electrosynthesis has been widely used as an environmentally conscious alternative to conventional methods for redox reactions because it utilizes electric current as a traceless redox agent instead of chemical redox agents. Indirect electrolysis employing a redox catalyst has received tremendous attention, since it provides various advantages compared to direct electrolysis. With indirect electrolysis, overpotential of electron transfer can be avoided, which is inherently milder, thus wide functional group tolerance can be achieved. Additionally, chemoselectivity, regioselectivity, and stereoselectivity can be tuned by the redox catalysts used in indirect electrolysis. Furthermore, electrode passivation can be avoided by preventing the formation of polymer films on the electrode surface. Common redox catalysts include N-oxyl radicals, hypervalent iodine species, halides, amines, benzoquinones (such as DDQ and tetrachlorobenzoquinone), and transition metals. In recent years, great progress has been made in the field of indirect organic electrosynthesis using transition metals as redox catalysts for reaction classes including C-H functionalization, radical cyclization, and cross-coupling of aryl halides-each owing to the diverse reactivity and accessible oxidation states of transition metals. Although various reviews of organic electrosynthesis are available, there is a lack of articles that focus on recent research progress in the area of indirect electrolysis using transition metals, which is the impetus for this review.

A Water-Soluble Sodium Pectate Complex with Copper as an Electrochemical Catalyst for Carbon Dioxide Reduction

A selective noble-metal-free molecular catalyst has emerged as a fruitful approach in the quest for designing efficient and stable catalytic materials for CO2 reduction. In this work, we report that a sodium pectate complex of copper (PG-NaCu) proved to be highly active in the electrocatalytic conversion of CO2 to CH4 in water. Stability and selectivity of conversion of CO2 to CH4 as a product at a glassy carbon electrode were discovered. The copper complex PG-NaCu was synthesized and characterized by physicochemical methods. The electrochemical CO2 reduction reaction (CO2RR) proceeds at -1.5 V vs. Ag/AgCl at ~10 mA/cm2 current densities in the presence of the catalyst. The current density decreases by less than 20% within 12 h of electrolysis (the main decrease occurs in the first 3 h of electrolysis in the presence of CO2). This copper pectate complex (PG-NaCu) combines the advantages of heterogeneous and homogeneous catalysts, the stability of heterogeneous solid materials and the performance (high activity and selectivity) of molecular catalysts.

Electrochemical Insight into Mechanisms and Metallocyclic Intermediates of C-H Functionalization

Transition metal-catalyzed C-H activation has emerged as a powerful tool in organic synthesis and electrosynthesis as well as in the development of new methodologies for producing fine chemicals. In order to achieve efficient and selective C-H functionalization, different strategies have been used to accelerate the C-H activation step, including the incorporation of directing groups in the substrate that facilitate coordination to the catalyst. In this review, we try to underscore that the understanding the mechanisms of the catalytic cycle and the reactivity or redox activity of the key metal cyclic intermediates in these reactions is the basis for controlling the selectivity of synthesis and electrosynthesis. Combination of the electrosynthesis and voltammetry with traditional synthetic and physico-chemical methods allows one to achieve selective transformation of C-H bonds to functionalized C-C or C-X (X=heteroatom or halogen) bonds which may encourage organic chemists to use it in the future more often. The possibilities and the benefits of electrochemical techniques are analyzed and summarized.

Site-Selective C-H Functionalization via Synergistic Use of Electrochemistry and Transition Metal Catalysis

Electrochemical synthesis of organic compounds has emerged as an attractive and environmentally benign alternative to conventional approaches for oxidation and reduction of organic compounds that utilizes electric current instead of chemical oxidants and reductants. As such, many useful transformations have been developed, including the Kolbe reaction, the Simons fluorination process, the Monsanto adiponitrile process, and the Shono oxidation, to name a few. Electrochemical C-H functionalization represents one of the most promising reaction types among many electrochemical transformations, since this process avoids prefunctionalization of substrates and provides novel retrosynthetic disconnections. However, site-selective anodic oxidation of C-H bonds is still a fundamental challenge due to the high oxidation potentials of C-H bonds compared to organic solvents and common functional groups. To overcome this issue, indirect electrolysis via the action of a mediator (a redox catalyst) is regularly employed, by which the selectivity can be controlled following reaction of said mediator with the substrate. Since the redox potentials of transition metal complexes can be easily tuned by modification of the ligand, the synergistic use of electrochemistry and transition metal catalysis to achieve site-selective C-H functionalization is an attractive strategy. In this Account, we summarize and contextualize our recent efforts toward transition metal-catalyzed electrochemical C-H functionalization proximal to a suitable directing group. We have developed C-H oxygenation, acylation, alkylation, and halogenation reactions in which a Pd(II) species is oxidized to a Pd(III) or Pd(IV) intermediate by anodic oxidation, followed by reductive elimination to form the corresponding C-O, C-C, and C-X bonds. Importantly, improved monofunctionalization selectivity is achieved in the Pd-catalyzed C(sp³)-H oxygenation compared to conventional approaches using PhI(OAc)₂ as the chemical oxidant. Physical separators are sometimes used to prevent the electrochemical deposition of Pd black on the cathode resulting from reduction of high valent Pd species. We skirted this issue through the development a Cu-catalyzed electrochemical C(sp²)-H amination using n-Bu₄NI as a redox cocatalyst in an undivided cell. In addition, we developed Ir-catalyzed electrochemical vinylic C-H functionalization of acrylic acids with alkynes in an undivided cell, affording various substituted α-pyrones in good to excellent yield. More importantly, chemical oxidants, including Ag₂CO₃, Cu(OAc)₂, and PhI(OAc)₂, resulted in much lower yields in the absence of electrical current under otherwise identical conditions. As elaborated below, progress in the area of electrochemical transition metal-catalyzed synthesis provides an effective platform for environmentally friendly and sustainable selective chemical transformations.

Electrochemical Transition-Metal-Catalyzed C-H Bond Functionalization: Electricity as Clean Surrogates of Chemical Oxidants

Transition-metal-catalyzed C-H activation has attracted much attention from the organic synthetic community because it obviates the need to prefunctionalize substrates. However, superstoichiometric chemical oxidants, such as copper- or silver-based metal oxidants, benzoquinones, organic peroxides, K₂ S₂ O₈ , hypervalent iodine, and O₂ , are required for most of the reactions. Thus, the development of environmentally benign and user-friendly C-H bond activation protocols, in the absence of chemical oxidants, are urgently desired. The inherent advantages and unique characteristics of organic electrosynthesis make fill this gap. Herein, recent progress in this area (until the end of September 2018) is summarized for different transition metals to highlight the potential sustainability of electro-organic chemistry.

Zn and Co redox active coordination polymers as efficient electrocatalysts

New redox active 1D helical coordination polymers M(fcdHp) (M(ii) = Zn(1), Co(2)) have been obtained.

Opportunities and challenges for combining electro- and organometallic catalysis in C(sp2)-H phosphonation

The chemistry of organoelemental compounds including carbon-phosphorus derivatives is now one of the most rapidly developing fields of research, regarding both fundamental science and solution of applied problems. Extensive opportunities for the synthesis of organophosphorus compounds are opened up by the use of unconventional methods, first of all, electrochemical ones, which combine the benefits of usual homogeneous chemistry in solution and electrochemistry, where reactants are generated at the electrodes directly in the reaction system. The interest in the organic electrosynthesis is caused by several factors, including mild conditions (room temperature, atmospheric pressure), the possibility of conducting reactions in a closed system with a low concentration of the catalyst, which is readily regenerated. This mini-review generalizes the achievements in the field of development of new electrochemical, efficient and atom-economical, catalytic methods for the formation of aromatic carbon – phosphorus bonds and some historical background of these approaches.

Ferrocene-Containing Sterically Hindered Phosphonium Salts

The synthesis and physical properties of the series of the ferrocenyl-containing sterically hindered phosphonium salts based on di(tert-butyl)ferrocenylphosphine is reported. Analysis of voltamogramms of the obtained compounds revealed some correlations between their structures and electrochemical properties. The elongation of the alkyl chain at the P atom as well as replacement of the Br⁻ anion by [BF₄]⁻ shifts the ferrocene/ferrocenium transition of the resulting salts into the positive region. DFT results shows that in the former case, the Br⁻ anion destabilizes the corresponding ion pair, making its oxidation easier due to increased highest occupied molecular orbital (HOMO) energy. Increased HOMO energy for ion pairs with the Br⁻ ion compared to BF₄⁻ are caused by contribution of bromide atomic orbitals to the HOMO. The observed correlations can be used for fine-tuning the properties of the salts making them attractive for applications in multicomponent batteries and capacitors.

Copper-Catalyzed Electrochemical C-H Amination of Arenes with Secondary Amines

Electrochemical oxidation represents an environmentally friendly solution to conventional methods that require caustic stoichiometric chemical oxidants. However, C-H functionalizations merging transition-metal catalysis and electrochemical techniques are, to date, largely confined to the use of precious metals and divided cells. Herein, we report the first examples of copper-catalyzed electrochemical C-H aminations of arenes at room temperature using undivided electrochemical cells, thereby providing a practical solution for the construction of arylamines. The use of n-Bu₄NI as a redox mediator is crucial for this transformation. On the basis of mechanistic studies including kinetic profiles, isotope effects, cyclic voltammetric analyses, and radical inhibition experiments, the reaction appears to proceed via a single-electron-transfer (SET) process, and a high valent Cu(III) species is likely involved. These findings provide a new avenue for transition-metal-catalyzed electrochemical C-H functionalization reactions using redox mediators.

A Ni(iii) complex stabilized by silica nanoparticles as an efficient nanoheterogeneous catalyst for oxidative C-H fluoroalkylation

We have developed Ni(III)-doped silica nanoparticles ([(bpy)xNi(III)]@SiO2) as a recyclable, low-leaching, and efficient oxidative functionalization nanocatalyst for aromatic C-H bonds. The catalyst is obtained by doping the complex [(bpy)3Ni(II)] on silica nanoparticles along with its subsequent electrooxidation to [(bpy)xNi(III)] without an additional oxidant. The coupling reaction of arenes with perfluoroheptanoic acid occurs with 100% conversion of reactants in a single step at room temperature under nanoheterogeneous conditions. The catalyst content is only 1% with respect to the substrates under electrochemical regeneration conditions. The catalyst can be easily separated from the reaction mixture and reused a minimum of five times. The results emphasize immobilization on the silica support and the electrochemical regeneration of Ni(III) complexes as a facile route for developing an efficient nanocatalyst for oxidative functionalization.

External oxidant-free cross-coupling: electrochemically induced aromatic C–H phosphonation of azoles with dialkyl-H-phosphonates under silver catalysis

A convenient external oxidant-free method of azole derivatives phosphorylation by dialkyl-H-phosphonates through electrochemical catalytic oxidation in the presence of silver salts (1%) is proposed.

Electrooxidative CH/PH functionalization as a novel way to synthesize benzo[b]phosphole oxides mediated by catalytic amounts of silver acetate

Electrochemical oxidation synthesis of benzo[b]phosphole oxides has been performed at room temperature with catalytic amounts of AgOAc.

Palladium-Catalyzed C(sp2)-H Acetoxylation via Electrochemical Oxidation

Palladium-catalyzed arene C(sp²)-H acetoxylation has emerged as a powerful tool to construct a carbon-oxygen (C-O) bond. However, the requirement of stoichiometric chemical oxidants for this transformation possesses a significant disadvantage. To solve this fundamental problem, we now report an anodic oxidation strategy to achieve arene C(sp²)-H acetoxylation.

Eco-efficient electrocatalytic C–P bond formation

The development of practical, efficient and atom-economical methods of formation of carbon-phosphorus bonds remains a topic of considerable interest for the current synthetic organic chemistry and electrochemistry. This review summarizes selected topics from the recent publications with particular emphasis on phosphine and phosphine oxides formation from white phosphorus, chlorophosphines in electrocatalytic processes using aryl, hetaryl or perfluoroalkyl halides as reagents. This review includes selected highlights concerning recent progress in modification of catalytic systems for aromatic C–H bonds phosphonation involving metal-catalyzed ligand directed or metal-induced oxidative processes. Furthermore, a part of this review is devoted to phosphorylation of olefins with white phosphorus under reductive conditions in water-organic media. Finally, we have also documented recent advances in ferrocene C–H activation and phosphorylation.

Palladium-Catalyzed C(sp3)-H Oxygenation via Electrochemical Oxidation

Palladium-catalyzed C-H activation/C-O bond-forming reactions have emerged as attractive tools for organic synthesis. Typically, these reactions require strong chemical oxidants, which convert organopalladium(II) intermediates into the Pd^III or Pd^IV oxidation state to promote otherwise challenging C-O reductive elimination. However, previously reported oxidants possess significant disadvantages, including poor atom economy, high cost, and the formation of undesired byproducts. To overcome these issues, we report an electrochemical strategy that takes advantage of anodic oxidation of Pd^II to induce selective C-O reductive elimination with a variety of oxyanion coupling partners.

Redox trends in cyclometalated palladium(ii) complexes

Electrochemical and DFT studies on palladacycles revealed an increase in the metal–metal distance in the complexes leads to higher oxidation potentials.

One-stage synthesis of FcP(O)(OC2H5)2from ferrocene and α-hydroxyethylphosphonate

A new approach is proposed for ferrocene phosphorylation using α-hydroxylalkylphosphonate as a “masked” phosphorylating agent, by electrochemical reduction of a ferrocene and (Me)₂C(OH)P(O)(OC₂H₅)₂mixture at −50 °C.