Investigation of Pr2NiMnO6‐Ce0.9Gd0.1O1.95 composite cathode for intermediate-temperature solid oxide fuel cells

Synthesis, Structural Characterization, and Infrared Analysis of Double Perovskites Pr2NiMnO6, Gd2NiMnO6, and Er2NiMnO6 Functional Nano-Ceramics

We synthesized Pr2NiMnO6, Gd2NiMnO6, and Er2NiMnO6 double perovskites in a nano-ceramic form by a sol-gel method. By means of room-temperature X-ray powder diffraction measurements, we determined the crystal structure of the three compounds, which is monoclinic, corresponding to a double perovskite structure, described by space group P21/n structure. From the determined structures, the bulk moduli were estimated to be 173-179 GPa. The average size particle of nanoparticles was determined from X-ray diffraction by the Langford method plot and by the Scherrer formula. The morphology and homogeneity of nanoparticles were analyzed by scanning electron microscopy. We found that they form compact agglomerations of approximately 200 nm in diameter. Fourier transform infrared spectroscopy measurements were performed, determining the absorption spectrum. The assignment of the measured infrared absorption bands is discussed.

Effect of sintering temperature on electrochemical performance of porous SrTi1-xFexO3-δ (x = 0.35, 0.5, 0.7) oxygen electrodes for solid oxide cells

This work evaluates the effects of the sintering temperature (800 °C, 900 °C, 1000 °C) of SrTi1-xFexO3-δ (x = 0.35, 0.5, 0.7) porous electrodes on their electrochemical performance as potential oxygen electrode materials of solid oxide cells. The materials were prepared by a solid-state reaction method and revealed the expected cubic perovskite structure. After milling, the powders were characterised by a sub-micrometre particle size with high sinter-activity. It was shown that the lowest area specific resistance was achieved after sintering SrTi0.65Fe0.35O3 electrodes at 1000 °C, and SrTi0.5Fe0.5O3 and SrTi0.30Fe0.70O3 electrodes at 800 °C, which can be considered to be a relatively low temperature. In general, EIS measurements showed that increasing the Fe content results in lowered electrode polarisation and a decrease of the series resistance. Even though the studied materials have much lower total conductivities than state-of-the-art electrode materials (e.g. (La,Sr)(Co,Fe)O3), the polarisation resistances obtained in this work can be considered low.