Photoelectrochemical sensing for hydroquinone based on gold nanoparticle-modified indium tin oxide glass electrode

A light-driven photoelectrochemical sensor for highly selective detection of hydroquinone based on type-II heterojunction formed by carbon nanotubes immobilized in 3D honeycomb CdS/SnS2

The ecological environment and public safety are seriously threatened by the typical phenolic contaminant hydroquinone (HQ). Here, using a straightforward physical mixing technique, we created an n-n heterojunction by uniformly immobilizing cadmium sulfide (CdS) nanoparticles on the surface of a three-dimensionally layered, flower-like structure made of tin sulfide (SnS₂). Then, as photosensitizers, carbon nanotubes (CNTs) were added to the CdS/SnS₂ complex to create a type-II heterostructure of CdS/SnS₂/CNTs with synergistic effects. Subsequently, the detector HQ was bound to the modified photoelectrodes, which was accompanied by the hole oxidation of the bound HQ, leading to a significant increase in the photocurrent signal, thus allowing specific and sensitive detection of HQ. Under optimized detection conditions, the proposed photoelectrochemical sensor shows a wide detection range of 0.2 to 100 μM for HQ with a detection limit as low as 0.1 μM. The high accuracy of the sensor was demonstrated by comparison with the detection results of UV-vis spectrophotometry. In addition, the photoelectrochemical sensor exhibits good reproducibility, stability, selectivity, and specificity, providing a light-driven method to detect HQ.

Ecofriendly synthesized reduced graphene oxide embellished marsh marigold-like zinc oxide nanocomposite based on ultrasonication technique for the sensitive detection of environmental pollutant hydroquinone

A novel electrochemical sensor using reduced graphene oxide (RGO) decorated marsh marigold-like zinc oxide (ZnO) nanocomposite for the detection of hydroquinone (HQ) is detailed in this paper. We have adopted an ecofriendly preparation procedure for the synthesis of RGO and the synthesis of marsh marigold-like ZnO is carried out using aqueous solution method. The RGO/ZnO nanocomposite is prepared based on ultrasonication technique using a high-intensity ultrasonic bath DC200H (200 W/cm², 40 kHz) and is followed by its precise fabrication on glassy carbon electrode (GCE). Characterizations including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, and UV visible spectroscopy of ZnO nanoparticles, RGO, and RGO/ZnO nanocomposite are analyzed in this work. Different electrochemical studies were performed in this work to investigate performance of the proposed electrochemical sensor and cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques are used to achieve this. The oxidation and reduction peak currents of RGO/ZnO modified GCE exhibited sharp peaks at very low potential of 0.13 V and 0.06 V respectively. We have obtained a high sensitivity of 8.08 μA μM^-1 cm^-2, ultra-low limit of detection (LOD) value of 0.01 μM, and a broad linear range of 0.1-92 μM for the proposed sensor. Moreover, the fabricated sensor exhibited excellent selectivity, good reproducibility, stability, and repeatability revealing the high efficiency of the proposed sensor. Furthermore, experiments were conducted to examine the practical feasibility of the developed sensor. The electrochemical studies conducted as part of the work shows that RGO/ZnO nanocomposite is an apt material for the highly sensitive and efficient detection of HQ.