Fabrication and the electrochemical activation of network-like MnO2 nanoflakes as a flexible and large-area supercapacitor electrode

Wide-Spectrum Modulated Electrochromic Smart Windows Based on MnO2/PB Films

Inorganic materials have been extensively studied for visible electrochromism in the past few decades. However, the single inorganic electrochromic (EC) material commonly exhibits a single color change, leading to a narrow spectrum of modulation, which offsets or limits the maximally energy-saving ability. Here, we present a wide-spectrum modulated EC device designed by combining the complementary EC nanocomposite of manganese dioxide (MnO₂) and Prussian blue (PB) for enhanced energy savings. Porous MnO₂ nanostructures serve as host frameworks for the templated growth of PB, resulting in MnO₂/PB nanocomposites. The complementary optical modulation ranges of MnO₂ and PB enable a widen-spectrum modulation across the solar region with the development of the MnO₂/PB nanocomposite. The colored MnO₂/PB device exhibited an optical modulation of 32.1% in the wide solar spectrum range of 320-1100 nm and blocked 72.0% of the solar irradiance. Furthermore, fast switching responses (2.7 s for coloration and 2.1 s for bleaching) and a high coloration efficiency (83.1 cm²·C^-1) of the MnO₂/PB EC device are also achieved. The high EC performance of the MnO₂/PB nanocomposite device provides a new strategy for the design of high-performance energy-saving EC smart windows.

Enhanced Supercapacitor Performance Using a Co3 O4 @Co3 S4 Nanocomposite on Reduced Graphene Oxide/Ni Foam Electrodes

To avoid an enormous energy crisis in the not-too-distant future, it be emergent to establish high-performance energy storage devices such as supercapacitors. For this purpose, a three-dimensional (3D) heterostructure of Co₃ O₄ and Co₃ S₄ on nickel foam (NF) that is covered by reduced graphene oxide (rGO) has been prepared by following a facile multistep method. At first, rGO nanosheets are deposited on NF under mild hydrothermal conditions to increase the surface area. Subsequently, nanowalls of cobalt oxide are electro-deposited on rGO/Ni foam by applying cyclic-voltammetry (CV) under optimized conditions. Finally, for the synthesis of Co₃ O₄ @Co₃ S₄ nanocomposite, the nanostructure of Co₃ S₄ was fabricated from Co₃ O₄ nanowalls on rGO/NF by following an ordinary hydrothermal process through the sulfurization for the electrochemical application. The samples are characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The obtained sample delivers a high capacitance of 13.34 F cm^-2 (5651.24 F g^-1 ) at a current density of 6 mA cm^-2 compared to the Co₃ O₄ /rGO/NF electrode with a capacitance of 3.06 F cm^-2 (1230.77 F g^-1 ) at the same current density. The proposed electrode illustrates the superior electrochemical performance such as excellent specific energy density of 85.68 W h Kg^-1 , specific power density of 6048.03 W kg^-1 and a superior cycling performance (86% after 1000 charge/discharge cycles at a scan rate of 5 mV s^-1 ). Finally, by using Co₃ O₄ @Co₃ S₄ /rGO/NF and the activated carbon-based electrode as positive and negative electrodes, respectively, an asymmetric supercapacitor (ASC) device was assembled. The fabricated ASC provides an appropriate specific capacitance of 79.15 mF cm^-2 at the applied current density of 1 mA cm^-2 , and delivered an energy density of 0.143 Wh kg^-1 at the power density of 5.42 W kg^-1 .