Present status and perspectives of bioartificial kidneys

A Fibrin-Based Tissue-Engineered Renal Proximal Tubule for Bioartificial Kidney Devices: Development, Characterization and In Vitro Transport Study

A bioartificial renal proximal tubule is successfully engineered as a first step towards a bioartificial kidney for improved renal substitution therapy. To engineer the tubule, a tunable hollow fiber membrane with an exterior skin layer that provides immunoprotection for the cells from extracapillary blood flow and a coarse inner surface that facilitates a hydrogel coating for cell attachment was embedded in a “lab-on-a-chip” model for the small-scale exploratory testing under flow conditions. Fibrin was coated onto the inner surface of the hollow fiber, and human renal proximal tubule epithelial cells were then seeded. Using this model, we successfully cultured a confluent monolayer, as ascertained by immunofluorescence staining for ZO-1 tight junctions and other proximal tubule markers, scanning electron microscopy, and FITC-inulin recovery studies. Furthermore, the inulin studies, combined with the creatinine and glucose transport profiles, suggested that the confluent monolayer exhibits functional transport capabilities. The novel approaches here may eventually improve current renal substitution technology for renal failure patients.

Stem cells as a therapeutic approach to chronic kidney diseases

Much attention recently has been focused on stem cell technology as a possible alternative modality of treatment of a variety of diseases. Chronic kidney disease is a serious health problem and most chronic kidney diseases share in common the presence of interstitial and glomerular fibrosis, regardless of the underlying cause. To date there are no specific therapies aimed at treating fibrosis in the kidney. In a novel effort to address the underlying pathology in kidney disease, researchers are demonstrating that stem cell therapy can attenuate fibrosis in chronic kidney disease in animal models. This review will focus on the recent developments in stem cell research and their possible implications to treat chronic kidney disease.

Surface characteristics of acrylic modified polysulfone membranes improves renal proximal tubule cell adhesion and spreading

Current polyvinylpyrrolidone-modified polysulfone (PVP-PSU) membranes in haemodialysers do not facilitate the attachment and proliferation of renal proximal tubule cells (RPTCs). For bioartificial kidney (BAK) development expensive extracellular matrices are employed to ensure the PVP-PSU membranes can serve as a substrate for RPTCs. In this study we modified PSU using an acrylic monomer (am-PSU) and polymerization using ultraviolet irradiation. We demonstrated that on adjusting the PSU or acrylic content of the membranes the wettability and surface chemistry were altered, and this affected the amount of fibronectin (Fn) that was adsorbed onto the membranes. Using an integrin blocking assay we ascertained that Fn is an important extracellular matrix component that mediates RPTC attachment. The amount of Fn adsorbed also led to different bioresponses of RPTCs, which were evaluated using attachment and proliferation assays and qualitative quantification of vinculin, focal adhesion kinase, zonula occludens and Na(+)/K(+) ATPase. Our optimized membrane, am-PSU1 (21.4% C-O groups, 19.1% PVP-PSU; contact angle 71.5-80.80, PVP-PSU: 52.4-67.50), supports a confluent monolayer of RPTCs and prevents creatinine and inulin diffusion from the apical to the basal side, meeting the requirements for application in BAKs. However, further in vivo evaluation to assess the full functionality of RPTCs on am-PSU1 is required.

Development of bioartificial renal tubule devices with lifespan-extended human renal proximal tubular epithelial cells

BACKGROUND

The bioartificial renal tubule device is a cell therapy system for renal failure. The major obstacle in the development of the bioartificial renal tubule device is the obtainment of a large number of viable renal tubule cells to seed on the inner surface of hollow fibers. Although our previous studies had used a transformed cell line, they may be dangerous for clinical uses. Therefore, different approaches to amplify renal proximal tubular epithelial cells (RPTEC) in culture without oncogenes, vectors and carcinogens have been required.

METHODS

The limitation of the replicative lifespan of human RPTEC, which is ∼12 population doublings (PDs), was extended by invalidating messenger RNA of cell cycle-related genes with antisense oligonucleotide or small interfering RNA (siRNA).

RESULTS

Periodic transfection of siRNA to a tumor suppressor p53 or a cyclin-dependent kinase inhibitor p16(INK4a) extended the lifespan by 33 and 63 PDs, respectively, in 3 months of culture. The siRNA-mediated lifespan extension was controllable because cell division ceased within 2 weeks after the transfection was discontinued. Expressions of γ-glutamyltransferase 1 and glucose transporter 1 were recovered in siRNA-transfected RPTEC cultured on porous membranes. Bioartificial renal tubule devices (0.8 m(2)) constructed with these cells showed reabsorption of water (122.3 ± 4.2 mL/30 min), sodium (18.1 ± 0.7 mEq/30 min) and glucose (121.7 ± 4.4 mg/30 min) after 1 week of circulation. Furthermore, β2-microglobulin and pentosidine were metabolized by RPTEC in mini-devices (65 cm(2)) within 48 h of circulation.

CONCLUSIONS

These approaches enabled us to yield a high enough number of RPTEC for construction of bioartificial renal tubule devices repeatedly. Lifespan-extended RPTEC could recover their specific characteristics by culturing on porous membranes, and bioartificial renal tubule devices constructed with these cells showed good performances of reabsorption and metabolism.

SUMMARY

A large number of human renal tubular cells required for construction of the bioartificial renal tubule device were prepared by extending the lifespan of the primary cells by invalidating mRNA of cell cycle-related genes. Constructed bioartificial renal tubule devices with lifespan-extended cells showed good performances of in vitro examination of reabsorption and metabolism. Requiring no oncogenes, vectors or cell cloning, the RNAi-mediated lifespan extension can help advance tissue-replacement therapy as well as basic research.

Present status and future perspectives on the development of bioartificial kidneys for the treatment of acute and chronic renal failure patients

A bioartificial renal tubule device (BTD) consisting of a hollow-fiber module and human proximal tubular epithelial cells has been completed technically by Humes and colleagues and a few other groups. Humes and colleagues developed BTD, treated acute kidney injury patients with multiorgan failure by continuous hemofiltration (CHF) in conjunction with BTD, and reported a significantly higher survival rate than that by CHF with BTD without cells in the Food and Drug Administration phase IIa trial. However, BTD has never been approved by the US Government, as the CHF+BTD treatment did not show a significant difference from the control group in the phase IIb trial. Human proximal tubular epithelial cells were confirmed to be overgrown on artificial membrane, which resulted in the inhibition of active transports and the metabolism of essential substances. Function of the BTD could be maintained in a U0126-contained medium, even if the BTD had to have been waited by a new acute kidney injury patient for several weeks. For wearable kidneys, heparin-covalently bound membrane or methacryloyloxyethyl phosphorylcholine (MPC) polymer-coated membranes are candidates for antithrombogenic hemofilters, while endothelial progenitor cells from a cord blood, CD133(+) cells-attached hemofilter in which the permeability of the cells was enhanced by the enlarged diameter of fenestrae by treating with cytochalasin B are another candidate. The MPC blend membrane containing 1% of the MPC polymer in polysulfone was developed as a BTD module. MPC was 7 times larger at the sponge layer than at the skin layer of the membrane, resulting in hemocompatibility at the sponge layer and cytocompatibility at the skin layer.

Achievements and challenges in bioartificial kidney development

Bioartificial kidneys (BAKs) combine a conventional hemofilter in series with a bioreactor unit containing renal epithelial cells. The epithelial cells derived from the renal tubule should provide transport, metabolic, endocrinologic and immunomodulatory functions. Currently, primary human renal proximal tubule cells are most relevant for clinical applications. However, the use of human primary cells is associated with many obstacles, and the development of alternatives and an unlimited cell source is one of the most urgent challenges. BAKs have been applied in Phase I/II and Phase II clinical trials for the treatment of critically ill patients with acute renal failure. Significant effects on cytokine concentrations and long-term survival were observed. A subsequent Phase IIb clinical trial was discontinued after an interim analysis, and these results showed that further intense research on BAK-based therapies for acute renal failure was required. Development of BAK-based therapies for the treatment of patients suffering from end-stage renal disease is even more challenging, and related problems and research approaches are discussed herein, along with the development of mobile, portable, wearable and implantable devices.

Generation of easily accessible human kidney tubules on two-dimensional surfaces in vitro

The generation of tissue-like structures in vitro is of major interest for various fields of research including in vitro toxicology, regenerative therapies and tissue engineering. Usually 3D matrices are used to engineer tissue-like structures in vitro, and for the generation of kidney tubules, 3D gels are employed. Kidney tubules embedded within 3D gels are difficult to access for manipulations and imaging. Here we show how large and functional human kidney tubules can be generated in vitro on 2D surfaces, without the use of 3D matrices. The mechanism used by human primary renal proximal tubule cells for tubulogenesis on 2D surfaces appears to be distinct from the mechanism employed in 3D gels, and tubulogenesis on 2D surfaces involves interactions between epithelial and mesenchymal cells. The process is induced by transforming growth factor-β₁, and enhanced by a 3D substrate architecture. However, after triggering the process, the formation of renal tubules occurs with remarkable independence from the substrate architecture. Human proximal tubules generated on 2D surfaces typically have a length of several millimetres, and are easily accessible for manipulations and imaging, which makes them attractive for basic research and in vitro nephrotoxicology. The experimental system described also allows for in vitro studies on how primary human kidney cells regenerate renal structures after organ disruption. The finding that human kidney cells organize tissue-like structures independently from the substrate architecture has important consequences for kidney tissue engineering, and it will be important, for instance, to inhibit the process of tubulogenesis on 2D surfaces in bioartificial kidneys.

Use of preconditioned human phagocytes for extracorporeal adsorption of viruses

Conventional treatment of severe viral disease is limited by the narrow choice as well as the often-significant side effects or lack of clear efficacy of antiviral chemotherapy. At the same time, however, it is known that a reduction in viral load leads to significant clinical improvement in a number of important viral diseases. In this paper we discuss the possibility of using preconditioned human phagocytes in an extracorporeal biohybrid system for adsorption of viral pathogens. We present data from in vitro experiments testing adsorption of an enterovirus and of hepatitis B virus (HBV) by a preconditioned human promyelocytic cell line. While no clearance of HBV could be detected, the results revealed a near elimination of enterovirus with the cell line displaying robust viability. Enterovirus titers of 1000 (reciprocal) were reduced to a mean titer of 10(0.6) CCID(50) with no virus detectable after adsorption in two out of five samples. Titers of 10000 (reciprocal) were in turn reduced to a mean of 10(1.4) CCID(50). The kinetics of the process was remarkable with this near elimination of the pathogen occurring within only 15min. Extracorporeal viral adsorption by a cellular biohybrid system appears feasible. Pairing target pathogens with suitable cell lines may offer a versatile antiviral technology.

Construction of bioartificial renal tubule assist device in vitro and its function of transporting sodium and glucose

To explore a new way of constructing bioartificial renal tubule assist device (RAD) in vitro and its function of transporting sodium (Na(+)) and glucose and to evaluate the application of atomic force microscope in the RAD construction, rat renal tubular epithelial cell line NRK-52E was cultured in vitro, seeded onto the outer surfaces of hollow fibers in a bioreactor, and then cultured for two weeks to construct RAD. Bioreactor hollow fibers without NRK-52E cells were used as control. The morphologies of attached cells were observed with scanning electron microscope, and the junctions of cells and polysulfone membrane were observed with atomic force microscope. Transportation of Na(+) and glucose was measured. Oubaine and phlorizin were used to inhibit the transporting property. The results showed that NRK-52E cells and polysulfone membrane were closely linked, as observed under atomic force microscope. After exposure to oubaine and phlorizin, transporting rates of Na(+) and glucose were decreased significantly in the RAD group as compared with that in the control group (P<0.01). Furthermore, when the inhibitors were removed, transportation of Na(+) and glucose was restored. It is concluded that a new RAD was constructed successfully in vitro, and it is able to selectively transport Na(+) and glucose.