Application of hydrogels as submucosal fluid cushions for endoscopic mucosal resection and submucosal dissection

Injectable chitosan-polyvinylpyrrolidone composite thermosensitive hydrogels with sustained submucosal lifting for endoscopic submucosal dissection

To develop a submucosal injection material with sustained submucosal lifting for endoscopic submucosal dissection (ESD), this study designed and prepared a novel composite thermosensitive hydrogel system with high pH chitosan-polyvinylpyrrolidone-β-glycerophosphate (HpHCS-PVP-GP). HpHCS improved the injectability of the hydrogels and retained the rapid gelation ability at low concentrations. The modification of PVP significantly improved the stability of low-temperature hydrogel precursor solutions and the integrity of hydrogels formed at 37 °C through hydrogen bonds between PVP and HpHCS. A mathematical model was established using response surface methodology (RSM) to evaluate the synergistic effect of HpHCS, GP, and PVP concentrations on gelation time. This RSM model and submucosal lifting evaluation using in vitro pig esophageal models were used to determine the optimal formula of HpHCS-PVP-GP hydrogels. Although the higher PVP concentration (5 % (w/v)) prolonged gelation time, it improved hydrogel mechanical strength, resulting in better submucosal lifting performance. The experiments of Bama mini pigs showed that the heights of the cushions elevated by the HpHCS-5%PVP-GP hydrogel remained about 80 % 1 h after injection. Repeated injections were avoided, and the hydrogel had no cytotoxicity after electric cutting. Therefore, the HpHCS-PVP-GP thermosensitive hydrogel might be a promising submucosal injection material for ESD.

Easily-injectable shear-thinning hydrogel provides long-lasting submucosal barrier for gastrointestinal endoscopic surgery

Submucosal injection material has shown protective effect against gastrointestinal injury during endoscopic surgery in clinic. However, the protective ability of existing submucosal injection material is strictly limited by their difficult injectability and short barrier time. Herein, we report a shear-thinning gellan gum hydrogel that simultaneously has easy injectability and long-lasting barrier function, together with good hemostatic property and biocompatibility. Shear-thinning property endows our gellan gum hydrogel with excellent endoscopic injection performance, and the injection pressure of our gellan gum hydrogel is much lower than that of the small molecule solution (50 wt% dextrose) when injected through the endoscopic needle. More importantly, our gellan gum hydrogel shows much stronger barrier retention ability than normal saline and sodium hyaluronate solution in the ex vivo and in vivo models. Furthermore, our epinephrine-containing gellan gum hydrogel has a satisfactory hemostatic effect in the mucosal lesion resection model of pig. These results indicate an appealing application prospect for gellan gum hydrogel utilizing as a submucosal injection material in endoscopic surgery.

•

Submucosal injection materials are widely used in endoscopic surgery to protect against gastrointestinal injury.

•

Gellan gum hydrogel with shear-thinning character is a novel submucosal injection material.

•

Gellan gum hydrogel simultaneously has easy injectability and long-lasting barrier performance in vivo.

•

Epinephrine-containing gellan gum hydrogel has a satisfactory hemostatic effect.

Differences between two sodium hyaluronate-based submucosal injection materials currently used in Japan based on viscosity analysis

In Japan, two 0.4% sodium hyaluronate (HA)-based submucosal injection materials (SIMs) are currently used in endoscopic submucosal dissection (ESD): MucoUp (HA-Mc) and Ksmart (HA-Ks). HA-Mc and HA-Ks have the same concentration and are, thus, construed by most endoscopists to have no difference. Nevertheless, visual observation conveys the impression that HA-Ks have a higher viscosity than HA-Mc, suggesting that HA-Ks performs better than HA-Mc. This study aimed to examine the differences between HA-Mc and HA-Ks. HA-Ks exhibited higher viscosity due to greater weight-average molecular weight compared with HA-Mc. HA-Ks had significantly greater submucosal elevation height (SEH) than HA-Mc; the SEH of HA-Ks-80% (80% dilution of HA-Ks) was the same as that of HA-Mc. The ESD procedure time was significantly shorter with HA-Ks than with HA-Mc (15.2 ± 4.1 vs. 19.5 ± 5.9; P = 0.049). The total injection volume for HA-Ks was significantly lower than that for HA-Mc (10.8 ± 3.6 vs. 14.4 ± 4.6; P = 0.045). However, no significant difference in these items was observed between HA-Mc and HA-Ks-80%. HA-Mc and HA-Ks were considered to be almost the same. Nonetheless, HA-Ks exhibited higher viscosity and SIM performance than HA-Mc. HA-Ks-80% had almost the same performance as HA-Mc. Thus, understanding SIM performance and characteristics requires a focus on the viscosity of SIMs.

Off-label use of 0.4 % sodium hyaluronate teardrops: a safe and effective solution for submucosal injection in gastric endoscopic submucosal dissection

Background and study aims  Submucosal (SM) injection is a critical step in endoscopic submucosal dissection (ESD). In Japan, use of viscous solutions such as sodium hyaluronate are recommended; the commercially product available is MucoUp (Seikagaku Co. and Boston Scientific Japan Co., Japan). Nevertheless, MucoUp is expensive and unavailable in many Western countries. For the past 8 years, we have been using low-cost sterile teardrops solution composed of 0.4 % sodium hyaluronate (Adaptis Fresh, Legrand Laboratory, Brazil). This solution is readily available in drugstores with a cost of approximately US$ 10.00 for each 10-cc bottle. The aim of this study was to present the clinical outcome with off-label sodium hyaluronate use for SM injection in gastric ESD. Patients and methods  A single-center retrospective study of collected data investigating consecutive patients that underwent gastric ESD between 2012 and 2019. ESD was performed using 0.4 % sodium hyaluronate teardrop for SM injection and Flush Knife BT 2.5 (Fujifilm Co., Japan). The following data were analyzed: clinical-pathological features, en-bloc, R0 and curative resection rate, procedure duration, adverse events, and clinical outcome. Results  ESD was performed with sodium hyaluronate for submucosal injection in 78 patients. The en-bloc resection rate and R0 resection rate were 96.1 % and 92.3 %, respectively. The curative resection rate for epithelial lesions was 83.8 %. Adverse events occurred in 5 cases (6.3 %): delayed bleeding (3.8 %, 3 cases) and perforation (2.5 %, 2 cases); all managed successfully by clipping and thermal coagulation. The mean volume of sodium hyaluronate solution used per patient was 10 cc (SD: ± 8 cc). During follow-up (mean: 17 months; SD: ± 14.5 months), two patients developed metachronous lesions (2.5 %). Conclusions  Off-label use of teardrops with 0.4 % sodium hyaluronate for submucosal injection was demonstrated to be safe and able to provide an effective submucosal cushion that facilitates SM dissection in gastric ESD procedures.

Endoscopically Injectable Shear-Thinning Hydrogels Facilitating Polyp Removal

Submucosal elevation, the process of instilling material in the submucosal space for separation of the surface mucosa and deeper muscularis layer, is a significant aspect of the endoscopic mucosal resection of large lesions performed to facilitate lesion removal and maximize safety. Submucosal injection, when applied, has historically been performed with normal saline, though this is limited by its rapid dissipation; solutions ideally need to be easily injectable, biocompatible, and provide a long-lasting submucosal cushion with a desirable height. Here, reported is a new set of materials, endoscopically injectable shear-thinning hydrogels, meeting these requirements because of their biocompatible components and ability to form a solid hydrogel upon injection. These findings are supported by evaluation in a large animal model and ultimately demonstrate the potential of these shear-thinning hydrogels to serve as efficient submucosal injection fluids for cushion development. Given these unique characteristics, their broad application in mucosal resection techniques is anticipated.

Identification of the critical viscoelastic factor in the performance of submucosal injection materials

High-performance submucosal injection materials (SIMs) contribute to the success of endoscopic therapy for early-stage gastrointestinal neoplasms. This study aimed to identify the most important factor (viscoelastic parameter) that determines SIM performance and the ease of injection. To determine the ideal viscoelastic parameters of SIMs, submucosal elevation heights (SEHs) and the ease of submucosal injection [characterized by injection pressures (IPs)] were evaluated using a newly developed ex vivo model, in which a constant tension was applied to the studied specimen. The strongest positive correlation was observed between the loss modulus determined at an oscillation frequency of 0.1 rad/s and SEH (correlation coefficient > 0.9) and between the loss modulus at 10 rad/s and IP (correlation coefficient > 0.9). SIMs with high loss moduli (0.1 rad/s) also contributed to maintenance of the submucosal elevation. Moreover, the SEHs of pseudoplastic fluid SIMs (whose loss moduli increased slightly with increasing angular frequency) were greater than those of Newtonian fluid SIMs (whose loss modulus increased drastically with increasing angular frequency). In this study, the ideal viscoelastic SIM parameters were clarified. The loss modulus (0.1 rad/s) was the most important viscoelastic factor affecting SIM performance. Additionally, the development of pseudoplastic fluid SIMs may lead to the creation of next-generation SIMs, with a performance superior to that of sodium hyaluronate, which is currently used widely in endoscopic treatments.

Development of a new ex vivo model for evaluation of endoscopic submucosal injection materials performance

BACKGROUND AND AIMS

Development of high-performance submucosal injection materials (SIMs) contribute to the advancement of endoscopic therapy for early-stage gastrointestinal neoplasms. This study aimed to develop a new ex vivo model that mimics the human gastrointestinal tract to evaluate the performance (the height and duration of the submucosal elevation) of various SIMs in detail.

METHODS

A new ex vivo model that applies a constant tension to the tested specimen (the porcine gastric specimen) was developed. SIMs were injected into the submucosa at the center or edge of the tested specimen, and submucosal elevation heights (SEHs) were measured over time.

RESULTS

The average value and standard deviation of SEH determined using the conventional model (the tested specimen was fixed with pins) were higher than those obtained using the new model, which showed that the new model could precisely measure the SEH of a given SIM. In addition, the performance (SEH) of SIMs decreased with increasing tension applied to the specimen, suggesting that the performance of SIMs deteriorates with the over-expansion of the gastrointestinal tract. The submucosal elevation formed at the specimen edge disappeared faster than that formed at the specimen's center.

CONCLUSIONS

The proposed new ex vivo model allows accurate SEH measurement under uniform conditions and detailed comparison of the performances of various types of SIMs and can contribute to the development of high-performance materials.

Future Development of Endoscopic Accessories for Endoscopic Submucosal Dissection

Endoscopic submucosal dissection (ESD) has recently been accepted as a standard treatment for patients with early gastric cancer (EGC), without lymph node metastases. Given the rise in the number of ESDs being performed, new endoscopic accessories are being developed and existing accessories modified to facilitate the execution of ESD and reduce complication rates. This paper examines the history underlying the development of these new endoscopic accessories and indicates future directions for the development of these accessories.

How to deal with large colorectal polyps: snare, endoscopic mucosal resection, and endoscopic submucosal dissection; resect or refer?

PURPOSE OF REVIEW

The importance of accurate polyp detection and removal is paramount to preventing colon cancer. Resection of large polyps can be challenging to the endoscopist based on their size, shape, or location. Large polyps have the potential of harboring malignancy and a higher risk of complications with resection. Careful assessment of each lesion and meticulous resection using the appropriate tools and techniques is essential.

RECENT FINDINGS

Over the last 15 years, the development of endoscopic mucosal resection (EMR) and endoscopic submucosal dissection (ESD) techniques has presented the endoscopist with the opportunity to manage patients with large and flat lesions thereby avoiding the need for surgery. However, these techniques are complex and require extensive knowledge and skill in the use of various devices to resect a lesion completely and manage bleeding and perforation associated with these procedures.

SUMMARY

Large colon polyps manifest as either polypoid or nonpolypoid (flat) lesions. Polypoid lesions, especially those with pedicles, are removed with snare resection, whereas flat lesions may require the use of EMR or ESD. Resection of large polyps (>1 cm) requires additional tools and techniques to ensure safe and complete resection. We will discuss our approach to dealing with large colorectal polyps: snare, EMR, and ESD; resect or refer?