Evaluation of lateral instability of the atlanto-axial joint in rheumatoid arthritis using dynamic open-mouth view radiographs

Automatic evaluation of atlantoaxial subluxation in rheumatoid arthritis by a deep learning model

BACKGROUND

This work aims to develop a deep learning model, assessing atlantoaxial subluxation (AAS) in rheumatoid arthritis (RA), which can often be ambiguous in clinical practice.

METHODS

We collected 4691 X-ray images of the cervical spine of the 906 patients with RA. Among these images, 3480 were used for training the deep learning model, 803 were used for validating the model during the training process, and the remaining 408 were used for testing the performance of the trained model. The two-dimensional key points' detection model of Deep High-Resolution Representation Learning for Human Pose Estimation was adopted as the base convolutional neural network model. The model inferred four coordinates to calculate the atlantodental interval (ADI) and space available for the spinal cord (SAC). Finally, these values were compared with those by clinicians to evaluate the performance of the model.

RESULTS

Among the 408 cervical images for testing the performance, the trained model correctly identified the four coordinates in 99.5% of the dataset. The values of ADI and SAC were positively correlated among the model and two clinicians. The sensitivity of AAS diagnosis with ADI or SAC by the model was 0.86 and 0.97 respectively. The specificity of that was 0.57 and 0.5 respectively.

CONCLUSIONS

We present the development of a deep learning model for the evaluation of cervical lesions of patients with RA. The model was demonstrably shown to be useful for quantitative evaluation.

Radiological assessment and surgical management of cervical spine involvement in patients with rheumatoid arthritis

The purpose of the present systematic review was to describe the diagnostic evaluation of rheumatoid arthritis in the cervical spine to provide a better understanding of the indications and options of surgical intervention. We performed a literature review of Pub-med, Embase, and Scopus database. Upon implementing specific inclusion and exclusion criteria, all eligible articles were identified. A total of 1878 patients with Rheumatoid Arthritis (RA) were evaluated for cervical spine involvement with plain radiographs. Atlantoaxial subluxation (AAS) ranged from 16.4 to 95.7% in plain radiographs while sub-axial subluxation ranged from 10 to 43.6% of cases. Anterior atlantodental interval (AADI) was found to between 2.5 mm and 4.61 mm in neutral and flexion position respectively, while Posterior Atlantodental Interval (PADI) was between 20.4 and 24.92 mm. 660 patients with RA had undergone an MRI. A pannus diagnosis ranged from 13.33 to 85.36% while spinal cord compression was reported in 0-13% of cases. When it comes to surgical outcomes, Atlanto-axial joint (AAJ) fusion success rates ranged from 45.16 to 100% of cases. Furthermore, the incidence of postoperative subluxation ranged from 0 to 77.7%. With regards to AADI it is evident that its value decreased in all studies. Furthermore, an improvement in Ranawat classification was variable between studies with a report improvement frequency by at least one class ranging from 0 to 54.5%. In conclusion, through careful radiographic and clinical evaluation, cervical spine involvement in patients with RA can be detected. Surgery is a valuable option for these patients and can lead to improvement in their symptoms.

Atlanto-axial rotary instability (Fielding type 1): characteristic clinical and radiological findings, and treatment outcomes following alignment, fusion, and stabilization

Atlanto-axial instability (AAI) is common in the connective tissue disorders, such as rheumatoid arthritis, and increasingly recognized in the heritable disorders of Stickler, Loeys-Dietz, Marfan, Morquio, and Ehlers-Danlos (EDS) syndromes, where it typically presents as a rotary subluxation due to incompetence of the alar ligament. This retrospective, IRB-approved study examines 20 subjects with Fielding type 1 rotary subluxation, characterized by anterior subluxation of the facet on one side, with a normal atlanto-dental interval. Subjects diagnosed with a heritable connective tissue disorder, and AAI had failed non-operative treatment and presented with severe headache, neck pain, and characteristic neurological findings. Subjects underwent a modified Goel-Harms posterior C1-C2 screw fixation and fusion without complication. At 15 months, two subjects underwent reoperation following a fall (one) and occipito-atlantal instability (one). Patients reported improvement in the frequency or severity of neck pain (P < 0.001), numbness in the hands and lower extremities (P = 0.001), headaches, pre-syncope, and lightheadedness (all P < 0.01), vertigo and arm weakness (both P = 0.01), and syncope, nausea, joint pain, and exercise tolerance (all P < 0.05). The diagnosis of Fielding type 1 AAI requires directed investigation with dynamic imaging. Alignment and stabilization is associated with improvement of pain, syncopal and near-syncopal episodes, sensorimotor function, and exercise tolerance.

Inter-examiner reliability of radiographic measurements from Open-mouth lateral bending cervical radiographs

Background

Following head and neck trauma, the involvement of the cranio-cervical junction (CCJ) and its contribution to a patients transition to chronic pain, is poorly understood. The detection of hypermobility in this region is dependent on clinical examination and static imaging modalities such as x-ray, CT and MRI. Sagittal plane hypermobility of the CCJ is evaluated using saggital view, flexion-extension cervical radiographs. Frontal plane hypermobility is typically assessed using lateral bending and open mouth cervical radiographs. Unfortunately there is no established reliability surrounding the use of these measures. This study explores the reliability of radiographic measurements of lateral-bending open-mouth cervical radiographs.

Methods

Cervical open-mouth lateral-bending X-ray images were collected from 56 different patients between 18 and 60 years of age patients following cervical spine injury. These images were interpreted by two musculoskeletal radiologists and two clinicians (physiatrist and chiropractor), using a standard set of measurements. Measurements included qualitative and quantitative assessments of the amount of asymmetry noted between various osseous landmarks. Reliability statistics were calculated for levels of agreement using kappa coefficients (κ) and Intraclass Correlation Coefficients (ICC) for dichotomous and continuous variables, respectively.

Results

Reliability (κ) for qualitative assessments were moderate to substantial for asymmetry of neutral C2 spinous position, dens-lateral mass spacing, and “step off” between the lateral borders of the articular pillars of C2 and C1 lateral mass (κ range = .47–.78). ICC values for the quantitative measurements of dens-lateral mass spacing and “step off” between the lateral borders of the C2 articular pillars and C1 lateral mass were moderate to excellent (ICC range = .56–.97).

Conclusions

The qualitative and quantitative measurements used in this study demonstrated good to excellent inter-examiner reliability. Correlation with clinical findings is necessary to establish the utility of these measurements in clinical practice.

Neurological and spinal manifestations of the Ehlers-Danlos syndromes

The Ehlers-Danlos syndromes (EDS) are a heterogeneous group of heritable connective tissue disorders characterized by joint hypermobility, skin extensibility, and tissue fragility. This communication briefly reports upon the neurological manifestations that arise including the weakness of the ligaments of the craniocervical junction and spine, early disc degeneration, and the weakness of the epineurium and perineurium surrounding peripheral nerves. Entrapment, deformation, and biophysical deformative stresses exerted upon the nervous system may alter gene expression, neuronal function and phenotypic expression. This report also discusses increased prevalence of migraine, idiopathic intracranial hypertension, Tarlov cysts, tethered cord syndrome, and dystonia, where associations with EDS have been anecdotally reported, but where epidemiological evidence is not yet available. Chiari Malformation Type I (CMI) has been reported to be a comorbid condition to EDS, and may be complicated by craniocervical instability or basilar invagination. Motor delay, headache, and quadriparesis have been attributed to ligamentous laxity and instability at the atlanto-occipital and atlantoaxial joints, which may complicate all forms of EDS. Discopathy and early degenerative spondylotic disease manifest by spinal segmental instability and kyphosis, rendering EDS patients prone to mechanical pain, and myelopathy. Musculoskeletal pain starts early, is chronic and debilitating, and the neuromuscular disease of EDS manifests symptomatically with weakness, myalgia, easy fatigability, limited walking, reduction of vibration sense, and mild impairment of mobility and daily activities. Consensus criteria and clinical practice guidelines, based upon stronger epidemiological and pathophysiological evidence, are needed to refine diagnosis and treatment of the various neurological and spinal manifestations of EDS. © 2017 Wiley Periodicals, Inc.

In vivo 3D kinematics of the upper cervical spine during head rotation in rheumatoid arthritis

Object

The upper cervical spine is commonly involved in persons with rheumatoid arthritis (RA). Although 2D measurements have long been used in the evaluation of cervical lesions caused by RA, 2D measurements are limited in their effectiveness for detecting subtle and complex morphological and kinematic changes. The purpose of this study was to elucidate the 3D kinematics of the upper cervical spine in RA and the relationship between 3D morphological changes and decreased segmental rotational motion.

Methods

Twenty-five consecutive patients (2 men and 23 women, mean age 63.5 years, range 42–77 years) with RA (the RA group) and 10 patients (5 men and 5 women, mean age 69.9 years, range 57–82 years) with cervical spondylosis and no involvement of the upper cervical spine (the control group) underwent 3D CT of the cervical spine in 3 positions (neutral, 45° head rotation to the left, and 45° head rotation to the right). The segmental rotation angle from the occiput (Oc) to C-2 was calculated for each participant using a voxel-based registration method, and the 3D destruction of articular facets was quantified using the authors' own parameter, the articular facet index.

Results

The segmental rotation angle was significantly smaller at C1–2 and larger at Oc–C1 in the RA group compared with the control group. The degree of the destruction of the articular facet at C-1 and C-2 correlated with the segmental rotation angle.

Conclusions

In vivo 3D kinematics of the upper cervical spine during head rotation in patients with RA were accurately measured, allowing quantification of the degree of joint destruction for the first time. Joint destruction may play an important role in decreasing segmental motion of the upper cervical spine in RA.

Occult hypermobility of the craniocervical junction: a case report and review

STUDY DESIGN

Resident's case problem.

BACKGROUND

Patients often present to physical therapists with chief complaints of neck pain, occipital headache, and dizziness associated with a past history of cervical spine injury. These symptoms may be associated with various cervical spine conditions, including craniocervical junction (CCJ) hypermobility.

DIAGNOSIS

This report reviews the history, physical exam, and diagnostic imaging findings of a patient with the above symptoms. This patient, who had a history of multiple cervical spine injuries, was examined with 2 manual therapy provocative tests: the Sharp-Purser test, which is intended to stress the transverse ligament and odontoid, and the modified lateral shear test, which is intended to stress the alar ligaments. The lateral shear test was perceived as demonstrating excessive mobility and a soft end feel, with a "shift" of C1 on C2. Stress cervical radiographs, obtained using open-mouth projections in neutral, left, and right cervical lateral flexion, revealed a 3-mm lateral offset of the right lateral mass of C1 on C2. MRI evaluation of the lower cervical spine did not reveal any significant disc derangement; however, images of the soft tissues of the craniocervical junction were not obtained. Based on the examination and imaging studies, the patient was determined to have a previously undiagnosed hypermobility of the atlantoaxial joint.

DISCUSSION

The patient was advised to avoid rotational manipulation and end range lateral flexion stretching exercises. Axial traction manipulation techniques, midrange stabilization exercises, and postural advice appeared to provide good relief of symptoms. Physical therapists should consider the possibility of CCJ hypermobility in the frontal plane when examining the cervical spine in patients with chronic neck pain, headache, and a past history of trauma. The lateral shear test and stress radiography may provide simple screening tests for occult CCJ hypermobility; however, the reliability and validity of these tests is lacking. Further research on diagnosis and management of CCJ hypermobility is warranted.

LEVEL OF EVIDENCE

Differential diagnosis, level 4.

Dynamic close-mouth view radiograph method for the diagnosis of lateral dynamic instability of the atlantoaxial joint

The purpose of the current study is to establish the dynamic close-mouth view radiograph method. Seven healthy volunteers were enrolled. Dynamic open-mouth and close-mouth view radiographs were obtained. The odontoid lateral mass interval and the dynamic atlantodental lateral shift (ADLS) were measured. The ADLS was 9.4+/-5.3% by the close-mouth view, showing a significantly greater percentage than that of 5.3+/-4.0% by the open-mouth view. The dynamic close-mouth view can be useful for diagnosis of atlantoaxial lateral instability.

Three-dimensional morphology and kinematics of the craniovertebral junction in rheumatoid arthritis

STUDY DESIGN

A case-series study.

OBJECTIVES

To measure the 3-dimensional (3D) morphology and kinematics of the craniovertebral junction (CVJ) using a 3D computed tomography (CT) model; to reveal abnormal patterns and the relationships between pathology and kinematics.

SUMMARY OF BACKGROUND DATA

Evaluations using radiography, 2-dimensional (2D) CT and magnetic resonance imaging have limitations because of the complex 3D structure of the CVJ.

METHODS

Twenty-four rheumatoid arthritis patients (21 females, 3 males) with cervical involvement underwent CT scanning of the cervical spine from the basilar process of the occipital bone to the first thoracic vertebra in neutral and flexed positions. The 3D morphology of the occipital condyle, atlas, and axis were classified based on the type of deformity observed. Periodontoid lesions (continuous bony lesions between the atlas and the odontoid process) were also noted. The 3D kinematics in the atlanto-occipital and atlantoaxial joints were evaluated using the volume merge method.

RESULTS

Deformities in the atlanto-occipital joints appeared more frequently than those in the atlantoaxial joints. The most common instability pattern was flexural rotation during flexion at the CVJ. The direction of translational motions during flexion was posterior in the atlanto-occipital joint and anterior and caudal in the atlantoaxial joint.

CONCLUSION

The results suggest that bilateral occipital condyle deformation, unilateral and bilateral mass collapse, and periodontoid lesions may affect flexion/extension rotational instability in the atlantoaxial joint. In addition, unilateral occipital condyle deformation and atlantoaxial joint stability may affect sagittal translational instability to the posterior side in the atlanto-occipital joint. The noninvasive 3D CT imaging technique employed here would be useful for predicting the prognosis of patients with rheumatoid deformities at the CVJ.