Different air-water spray regulations affect the healing of Er,Cr:YSGG laser incisions

Real-Time Monitoring of Thermal Phenomena during Femtosecond Ablation of Bone Tissue for Process Control

Femtosecond (fs) laser technology is currently being considered in innovative fields such as osteotomy and treatment of hard tissue thanks to the achievable high resolution and ability to prevent tissue damage. In a previous study, suitable process parameters were obtained to achieve competitive ablation rates on pork femur processing. Nevertheless, a better control of thermal accumulation in the tissue during laser ablation could further improve the postoperative regeneration of the treated bone compared with conventional procedures and push forward the exploitation of such technology. This study presents methods for real time analyses of bone tissue temperature and composition during fs laser ablation and highlights the importance of implementing an efficient cooling method of bone tissue in order to achieve optimized results. Results show that it is possible to achieve a larger process window for bone tissue ablation where bone tissue temperature remains within the protein denaturation temperature in water-based processing environment. This is a key outcome towards a clinical exploitation of the presented technology, where higher process throughputs are necessary. The effects of process parameters and environments on bone tissue were confirmed by LIBS technique, which proved to be an efficient method by which to record real-time variation of bone tissue composition during laser irradiation.

A histological evaluation of the surgical margins from human oral fibrous-epithelial lesions excised with CO2 laser, Diode laser, Er:YAG laser, Nd:YAG laser, electrosurgical scalpel and cold scalpel

Background

We aim to evaluate the presence of histological artefacts in the surgical margins of human oral fibro-epithelial hyperplasias excised with lasers of different wavelengths, and also electrosurgical scalpel and cold scalpel. Moreover, we aim to determine if some of these instruments could impair the normal histological diagnosis of these lesions.

Material and Methods

We included 130 consecutive surgical samples of 80 females and 50 males (mean age of 53.82±16.55) with a histological diagnosis of an oral benign fibrous-epithelial hyperplasias. The samples were categorized into 6 groups according to the type of instrument used: CO2 laser group, diode laser group, Er:YAG laser group, Nd:YAG laser group, electrosurgical scalpel group and cold scalpel group. Histological instrument-induced changes were microscopic evaluated and related with clinical and pathological variables.

Results

The instrument with highest tissue damage extension (TDE) was the electrosurgical scalpel (1002.2µm±434.92), followed by diode laser (913.73 µm±322.45), Nd:YAG (899.83µm±327.75), CO2 laser (538.37µm±170.50), Er:YAG laser (166.47µm±123.85), and at last with fewer alterations the cold scalpel group (2.36µm±7.27) (P< 0.001). The most regular incision was observed in CO2 laser group, followed by Er:YAG laser, Nd:YAG laser, electrosurgical scalpel and diode laser group with the less regular incision using cold scalpel as comparison (P< 0.001). A correlation was found between the incision score and TDE (P< 0.001). Regarding histological diagnosis, no case showed any limitation of diagnosis related with the use of any instrument evaluated.

Conclusions

Our results suggest that lasers can be used for the excision of oral benign fibrous-epithelial hyperplasias, without hispathological diagnosis limitations, as long as the physical properties of each laser are known and respected. Er:YAG laser have shown to be a laser with few tissue damage extension and with good incision regularity, been a possible instrument of choice for the surgical removal of these lesions.

Key words:CO2 laser, diode laser, Er:YAG laser, Nd:YAG laser, oral mucosa.

Use of 1070 nm fiber lasers in oral surgery: preliminary ex vivo study with FBG temperature monitoring

BACKGROUND AND AIMS

The aim of this ex vivo study was to demonstrate the performances of 1070 nm fiber lasers for the ablation of oral tissues through the evaluation of the histological modifications made by a blind pathologist and the measurement of the thermal elevation during laser irradiation by a sensor based on a fiber Bragg grating.

MATERIALS AND METHODS

The source used was a pulsed fiber laser emitting at 1070 nm, with 20 W maximum average output power and 100 ns fixed pulse duration. Different tests were performed by changing the laser parameters, particularly the peak power of the pulses and the repetition rate.

RESULTS

The tissue of the measurements demonstrated that the best properties in term of cutting capability and, at the same time, the lower thermal damages to the tissues can be obtained with a peak power of 3 kW, a repetition rate of 50 kHz and a speed of 5 mm/s.

CONCLUSIONS

This ex vivo study showed that 1070 nm fiber lasers can be very useful in oral surgery, since they provide a reduced thermal elevation in the irradiated tissues, thus consequently respecting their biological structures. Moreover, this work demonstrates that FBG sensors, based on the optical fiber technology as the laser source considered for the tests, may be good instruments to record thermal elevation when applied to the ex vivo studies on animal models.

Different laser wavelengths comparison in the second-stage implant surgery: an ex vivo study

The implant surgery consists of two distinct techniques, the transmucosal, also known as "one-stage" and the "two-stage" technique. Lasers represent a possible aid in implant dentistry, especially in the two-stage technique and its main characteristics are represented by a decreased trauma to bone and soft tissues, a reduction of pain as well as a reduction of the risk of postoperative infections. The aim of this study was to analyze in an animal model the thermal elevation induced by four different laser wavelengths (diode, Nd:YAG, Er:YAG, KTP) during the implant uncovering. Four pig jaws were used to carry out this study. Five implants were placed in each anatomical specimen for a total of 20 fixtures. Four wavelengths (532, 810, 1,064 and 2,940 nm) were used to uncover the implants. Two thermocouples were used to measure temperature changes during laser irradiation at bone level, peri-implant tissues and on the fixture surface The thermocouples were connected with two probes of 1.5 mm in diameter, in order to simultaneously recording two temperature variations. Surface temperature was also checked during all procedures with a thermal camera (Thermovision A 800, Flyr Systems, Stockolm, Sweden) connected to a PC. The mean temperatures of each specimen (five fixtures) were calculated (TM1, mean temperature at the beginning; TM2, mean peak temperature). Furthermore, a record of the temperature at 1 min after the end of the surgical procedure was taken (mean: TM3). All the recorded values were statistically evaluated by one-way analysis of variance (ANOVA). The thermocouples recorded a lower increase in temperature for Er:YAG and KTP laser; Nd:YAG and diode laser produced similar increases characterized by higher values. The thermo-camera pointed out the lower increase for Er:YAG and higher for diode laser. KTP laser resulted faster in uncovering implants and diode laser was the one that needed more time. This ex vivo study showed that laser utilization with the recommended parameters gives no risks of dangerous thermal elevation to the tissues and implants.

Effect of Er,Cr:YSGG laser application in the treatment of experimental periodontitis

The purpose of this study was to evaluate the influence of an erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser in the absence or presence of manual scaling and root planning (SRP) for the treatment of induced periodontitis in rats. Ligatures were placed in the subgingival region of the maxillary first molar. After a 7-day period, the ligatures were removed, and 40 rats were randomly divided into four groups (G), as follows: (GI) no treatment, (GII) scaling and root planning (SRP) with curettes, (GIII) Er,Cr:YSGG laser irradiation and (GIV) SRP with curettes followed by Er,Cr:YSGG laser irradiation. Seven and 30 days after the treatment, the animals were sacrificed and histologic, histometric and immunohistochemistry analyses were performed. All groups showed similar histopathological characteristics during the evaluation period. The histometric analysis was confirmed using Bonferroni and paired t tests. At 7 and 30 days, groups II, III and IV exhibited greater bone formation in the furcation area when compared to group I (p < 0.0001; p < 0.05). During the 7-day period, the groups irradiated with the laser (III and IV) showed a statistically larger new bone area than the group treated with SRP (II) (p < 0.01). Immunohistochemistry analysis revealed that the control group exhibited a higher expression of tartrate-resistant acid phosphatase (TRAP) and the receptor activator of nuclear factor κΒ ligand (RANKL) when compared to groups II, III and IV (p < 0.05). All treatments were able to reduce the inflammatory processes, consequently enabling the repair of periodontal tissues. The results achieved with the application of the Er,Cr:YSGG laser suggest that this laser can stimulate greater bone formation, especially over a shorter period of time.

Dental ablation with 1064 nm, 500 ps, Diode pumped solid state laser: A preliminary study

BACKGROUND

The Er:YAG laser in conservative dentistry is. good alternative to conventional instruments. Though several studies show the advantages of these devices, some drawbacks and unsolved problems are still present, such as the cost of the device and the large dimensions of the equipment.

PURPOSE

In the present study, the effectiveness of dental surface ablation with a picosecond infrared diode-pumped solid-state (DPSS) laser was investigated. In vitro tests on extracted human teeth were carried out, with assessment of the ablation quality in the tooth and thermal increase inside the pulp chamber.

MATERIALS AND METHODS

A solid-state picosecond laser was used for the experiments. The samples were exposed to laser energy at 1064 nm at a frequency of 30 kHz and a 500 ps pulse width. The target teeth were cooled during exposures. The internal temperature of the pulp chamber was monitored with. thermocouple.

RESULTS

Optical microscope images showed effective ablation with the absence of carbonisation and micro-cracks. The cooling maintained the temperature rise in the pulp chamber below the permitted 5.5°C.

DISCUSSION

The main problem with the use of lasers in dentistry when teeth are the target is the heat generated in the pulp chamber of the target teeth. With lasers operating in the femtosecond mode, a better management of the internal temperature is possible, but is offset by the high cost of such devices. With the ps domain system used in the present study together with cooling using chilled water, effective and clean ablation could be achieved with a controlled thermal effect in the pulp chamber.

CONCLUSIONS

In this preliminary study with a picosecond domain DPSS laser using water cooling for the target, effective hard tissue ablation was achieved keeping the thermal increase in the pulp within the permitted range. The results suggest that this system could be used in clinical practice with appropriate modifications.

Laser-assisted surgery with different wavelengths: a preliminary ex vivo study on thermal increase and histological evaluation

Since the introduction of laser in clinical practice, different wavelengths have been used for oral surgery on the basis of the different characteristics and affinities of each one. The aim of this study was a comparison of different laser wavelengths in relation to both thermal increase and "histological quality" in a model of soft tissue surgery procedures. Thermal evaluation was realized, during laser-assisted surgery excision performed on a bovine tongue, by a thermal camera device to evaluate thermal increase on the surface of the sample and with four thermocouples to evaluate thermal increase on the depth of the specimen; temperature was recorded before starting surgical procedure and at the peak of every excision. The quality of excision, in terms of tissue damage and regularity, was realized by two blind examiners on the basis of established criteria. The highest superficial thermal increase was recorded for Superpulse 5-W CO2 laser, the lowest one for Er:YAG laser. The highest in depth thermal increase was recorded for 5 W Diode laser, the lowest one for Er:YAG laser. The best quality of incision was obtained with a 3-W CO2 laser and 3-W diode laser; epithelial, stromal, and vascular damages were evaluated with different degrees for all the used wavelengths with the best result, in terms of "tissue respect," for Er:YAG laser. In all the surgical procedures performed, thermal increase was evaluated until the end of the procedure; at remaining tissue level, thermal decrease was evaluable in the few seconds after surgery. The Er:YAG laser was the device with a lower influence on thermal increase; CO2 and diode lasers revealed a good histological quality. Further studies may be necessary to test the reliability of laser devices for the excision of all the types of specimens needing histological evaluation and diagnosis.