Evaluation of mineral content of dentin treated with desensitizing agents and neodymium yttrium-aluminium-garnet (Nd:YAG) laser

A comparative evaluation of propolis and light-cured ormocer-based desensitizer in reducing dentin hypersensitivity

Objectives

The purpose of the study was to evaluate and compare the clinical efficacy and the durability of propolis and Light-cured ormocer-based desensitizer (Admira Protect, Voco: Cuxhaven Germany) in the treatment of dentin hypersensitivity (DH).

Materials and Methods

The study was conducted over a period of 2 months on 13 patients with 72 hypersensitive teeth, randomly allocated into three treatment groups: Group A: Treated with Propolis, Group B: Admira protect (Voco: Cuxhaven Germany), and Group C: Sterile water (Placebo control). Baseline sensitivity was recorded by the operator using tactile and evaporative stimuli. Visual analog scale (VAS) was used to record the degree of sensitivity perceived by the patients. All the groups received applications of allotted materials on day 1, 7, 14, and 21. After each applications VAS scoring was recorded. On day 30 and 60, only pain evaluation was done to determine the durability of each test materials.

Statistical Analysis

One-way ANOVA, repeated measure ANOVA and post hoc test was done for multiple comparison.

Results

All the groups showed significant results in reducing DH. Among Groups A and B, Group B showed immediate postoperative result at the end of the 1^st week.

Conclusion

Both the test materials were effective in reducing DH but Admira protect was found to be more efficient in reducing pain with longer duration of action (CTRI regd no: CTRI/2017/12/010755).

Effect of Erbium:Yttrium-Aluminum-Garnet Laser Combined with Mineralizing Agents on Microhardness of Demineralized Dentin

Objective The aim of this study was to assess the combined effect of erbium:yttrium-aluminum-garnet (Er:YAG) laser and mineralizing agents including casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and fluoride in improving the resistance of demineralized dentin at new demineralization process.

Materials and Methods One hundred and twenty healthy dentin surfaces were prepared and demineralized using acidic solutions. Primary microhardness was measured (h1), and samples were randomly divided into six groups. Each group received a different protocol as follows: Group A (control group): no additional treatment, Group B: applying a fluoridated gel, Group C: applying a CPP-ACP-containing cream, Group D: irradiation of Er:YAG laser, Group E: irradiation of Er:YAG laser combined with the application of a fluoridated agent, and Group F: irradiation of Er:YAG laser combined with the application of CPP-ACP-containing cream. Microhardness values were measured afterward (h2). Then, all the groups were re-exposed to acidic solution, and microhardness was measured for the third time (h3). The microhardness data were analyzed using analysis of variance and Scheffe's post hoc test.

Results Although application of mineralizing agents increased the microhardness of demineralized dentin in comparison with the control group, no significant difference was observed using two agents. Comparison of laser groups showed an increase in microhardness only after the irradiation of Er:YAG laser combined with the application of a fluoridated agent. Demineralizing process reduced the microhardness values in all the groups, but the application of a CPP-ACP agent caused the least reduction among the laser irradiated groups. Comparison of hardness changes at the beginning and end of the experiment did not show any significant differences between the groups.

Conclusion Comparison of treatment modalities used in this study exhibited that fluoride had the greatest impact on dentin resistance. Laser irradiation on demineralized dentin did not increase the hardness or resistance to acidic attacks.

Silver deposition on demineralized dentine surface dosed by silver diammine fluoride with different saliva

AIM

Silver diammine fluoride (SDF) is an anticaries agent that binds to tooth tissue. The aim of the present study was investigate the dose-response effect of SDF on demineralized dentine in basal medium mucin (BMM) saliva substitute and human saliva.

METHODS

Dentine discs stored in saliva substitute, BMM, and human unstimulated whole saliva (UWS) were chemically demineralized, and 10 μL of 10 wt%, 24 wt%, or 38 wt% SDF was applied and then stored in its respective saliva (BMM or UWS) for 5 days. Dentine disc samples were digested in 70% HNO₃ , and silver was quantitatively detected by inductively coupled plasma mass spectroscopy.

RESULTS

For both the BMM and UWS groups, the presence of silver increased proportionally with increasing concentrations of SDF (P < 0.05). For the 38 wt% SDF application, the mean absorption percentage of silver in dentine was 3.90% for the UWS group and 6.61% for the BMM group. The BMM group was found to yield a significantly higher amount of silver compared to UWS at 10 wt% and 38 wt% SDF application (α = 0.05); 38 wt% SDF interacts more with BMM with higher silver deposition than UWS.

CONCLUSION

The amount of silver found in dentine was in proportion to the concentration of SDF. Extrapolation of in vitro investigations using artificial saliva for SDF tooth interactions should be interpreted with caution.

[Effects of Nd: YAG laser irradiation on the root surfaces and adhesion of Streptococcus mutans]

OBJECTIVE

This study aimed to evaluate the effects of treatment with different powers of Nd: YAG laser irradiation on root surfaces and Streptococcus mutans (S. mutans) adhesion.

METHODS

Extracted teeth because of severe periodontal disease were divided into the following four groups: control group, laser group 1, laser group 2, and laser group 3. After scaling and root planning, laser group 1, laser group 2, and laser group 3 were separately treated with Nd: YAG laser irradiation (4/6/8 W, 60 s); however, the control group did not receive the treatment. Scanning electron microscopy (SEM) was used to determine the morphology. S. mutans were cultured with root slices from each group. Colony forming unit per mL (CFU·mL⁻¹) was used to count and compare the amounts of bacteria adhesion among groups. SEM was used to observe the difference of bacteria adhesion to root surfaces between control group (scaling) and laser group 2 (6 W, 60 s), thereby indicating the different bacteria adhesions because of different treatments.

RESULTS

Morphology alterations indicated that root surfaces in control group contain obvious smear layer, debris, and biofilm; whereas the root surfaces in laser group contain more cracks with less smear layer and debris. The bacteria counting indicated that S. mutans adhesion to laser group was weaker than that of control group (P<0.05). No statistical significance among the laser groups (P>0.05) was observed. Morphology alterations also verified that S. mutans adhesion to laser group 2 (6 W, 60 s) was weaker than that of control group (scaling).

CONCLUSIONS

This study demonstrated that Nd: YAG laser irradiation treatment after scaling can reduce smear layer, debris, and biofilm on the root surfaces as compared with conventional scaling. The laser treatment reduces the adhesion of S. mutans as well. However, Nd: YAG laser irradiation can cause cracks on the root surfaces. In this experiment, the optimum laser power of 6 W can thoroughly remove the smear layer and debris, as well as relatively improve the control of thermal damagee.

Ability of three desensitizing agents in dentinal tubule obliteration and durability: An in vitro study

Aim:

The purpose of this study was to evaluate the effectiveness of three desensitizing agents on dentinal tubule obliteration and their durability in use on the dentinal tubules.

Materials and Methods:

Sixty specimens were obtained from 30 extracted sound human maxillary first premolars. Each tooth was mesiodistally sectioned to obtain 30 buccal and 30 lingual surfaces, and enamel was removed in order to simulate hypersensitive dentin. Specimens were divided into four groups with 15 specimens each. Group 1 samples were immersed in artificial saliva, Group 2 samples were coated with Vivasens, Group 3 samples were coated with VOCO Admira Protect, and Group 4 samples were coated with Neo Active Apatite suspension. These specimens were examined under scanning electron microscope (SEM) to find out the occluding ability of the respective products. The specimens were brushed to find out their durability for 1 week and 1 month and were examined under SEM.

Statistical Analysis:

The results were statistically analyzed by analysis of variance (ANOVA) and Tukey's test.

Results:

Group 1 differed significantly from the Vivasens, Admira, and Neo Active Apatite groups at 5% level of significance (P < 0.05). The Vivasens group differed significantly from the Admira and Neo Active Apatite groups at 5% level of significance (P < 0.05).

Conclusion:

The Ormocer-based Admira Protect showed the best results.

The Effect of Three Desensitizing Agents on Dentin Hypersensitivity: A Randomized, Split-mouth Clinical Trial

The aim of this study was to evaluate the efficacy of three desensitizing agents to provide relief to dentin hypersensitivity after one session in a four-week follow-up. Forty selected patients participated in a double-blind study following a split-mouth model. One application of the desensitizing agents (A, Admira Protect [Voco]; B, Bifluorid 12 [Voco]; and C, Colgate Pro-Relief in office [Colgate Palmolive]) was performed in three different quadrants for each patient. Each tooth was evaluated by tactile and evaporative stimuli, and the sensitivity response was measured using the Visual Analogue Scale. Evaluations were performed at baseline, immediately after treatment, and after one, two, three, and four weeks. The application of Kruskal-Wallis and Dunn multiple comparisons tests (5%) for both tactile and evaporative stimuli showed that all agents presented a significant desensitizing effect. In groups A and B this relief was maintained for four and three weeks, respectively, as measured by tactile stimulus and for four weeks with evaporative stimulus. The desensitizing effect for group C was maintained for two weeks for both tactile and evaporative stimuli. It is concluded that all desensitizing agents tested were effective in reducing sensitivity compared to baseline values. One application of Admira Protect and Bifluorid 12 presented a longer-lasting desensitizing effect than did Colgate Pro-Relief (applied in the office) on both tactile and evaporative stimuli.

Effects of Er:YAG laser on mineral content of sound dentin in primary teeth

The aim of the present study was to evaluate the mineral content of sound dentin in primary teeth prepared using an Er:YAG laser at two different power settings. Thirty-six primary second molars were used in this study. Three dentin slabs were obtained from each tooth, and the slabs were randomly divided into three groups: Group A, control; Group B, Er:YAG laser at 3.5 W, 175 mJ, and 20 Hz, short pulse mode; and Group C, Er:YAG laser at 4 W, 200 mJ, and 20 Hz, medium-short pulse mode. One dentin slab per group was used to evaluate the dentinal morphology and surface roughness values using SEM and profilometer, respectively. Mineral content in the dentin slabs were calculated by inductively coupled plasma-atomic emission spectrometry (ICP-AES). The data were analyzed by one-way analysis of variance and Tukey's HSD tests. No significant differences in Ca, K, Mg, Na, and P levels or Ca/P ratio were found among the groups (P > 0.05). SEM micrographs showed that surface irregularities increased with a higher power setting. The surface roughness after laser treatment in Group B and Group C was found to be similar, unlike Group A.