Atomic force microscopy investigation of the interaction of low-level laser irradiation of collagen thin films in correlation with fibroblast response

On the effect of pepsin incubation on type I collagen from horse tendon: Fine tuning of its physico-chemical and rheological properties

Type I collagen is commonly recognized as the gold standard biomaterial for the manufacturing of medical devices for health-care related applications. In recent years, with the final aim of developing scaffolds with optimal bioactivity, even more studies focused on the influence of processing parameters on collagen properties, since processing can strongly affect the architecture of collagen at various length scales and, consequently, scaffolds macroscopic performances. The ability to finely tune scaffold properties in order to closely mimic the tissues' hierarchical features, preserving collagen's natural conformation, is actually of great interest. In this work, the effect of the pepsin-based extraction step on the material final properties was investigated. Thus, the physico-chemical properties of fibrillar type I collagens upon being extracted under various conditions were analyzed in depth. Correlations of collagen structure at the supramolecular scale with its microstructural properties were done, confirming the possibility of tuning rheological, viscoelastic and degradation properties of fibrillar type I collagen.

Atomic Force Microscopy Nanoindentation Method on Collagen Fibrils

Atomic Force Microscopy nanoindentation method is a powerful technique that can be used for the nano-mechanical characterization of bio-samples. Significant scientific efforts have been performed during the last two decades to accurately determine the Young’s modulus of collagen fibrils at the nanoscale, as it has been proven that mechanical alterations of collagen are related to various pathological conditions. Different contact mechanics models have been proposed for processing the force–indentation data based on assumptions regarding the shape of the indenter and collagen fibrils and on the elastic or elastic–plastic contact assumption. However, the results reported in the literature do not always agree; for example, the Young’s modulus values for dry collagen fibrils expand from 0.9 to 11.5 GPa. The most significant parameters for the broad range of values are related to the heterogeneous structure of the fibrils, the water content within the fibrils, the data processing errors, and the uncertainties in the calibration of the probe. An extensive discussion regarding the models arising from contact mechanics and the results provided in the literature is presented, while new approaches with respect to future research are proposed.

Ras suppressor-1 (RSU-1) promotes cell invasion in aggressive glioma cells and inhibits it in non-aggressive cells through STAT6 phospho-regulation

Most gliomas are invasive tumors formed from glial cells and associated with high mortality rates. In this study, we characterized four glioma cell lines of varying degree of aggressiveness (H4, SW1088, A172 and U87-MG) in terms of morphology, cytoskeleton organization and stiffness, and evaluated their invasive potential by performing invasion, colony forming and spheroid invasion assays. Cells were divided into two distinct groups: aggressive cell lines (A172 and U87-MG) with more elongated, softer and highly invasive cells and less aggressive cells (H4 and SW088). Interestingly, we found that Ras Suppressor-1 (RSU-1), a cell-matrix adhesion protein involved in cancer cell invasion, was significantly upregulated in more aggressive glioma cells compared to less aggressive. Importantly, RSU-1 silencing had opposing effects on glioma cell invasion depending on their aggressiveness, inhibiting migration and invasion of aggressive cells and promoting those of less aggressive cells. Finally, we found that RSU-1 silencing in aggressive cells led to decreased Signal Transducer and Activator of Transcription6 (STAT6) phosphorylation and Matrix Metalloproteinase13 (MMP13) expression in contrast to less invasive cells. Our study demonstrates that RSU-1 promotes invasion of aggressive glioma cells and inhibits it in the non-aggressive cells, indicating that it could serve as a predictor of gliomas progression.

Inhibition of Breast Cancer Cell Invasion by Ras Suppressor-1 (RSU-1) Silencing Is Reversed by Growth Differentiation Factor-15 (GDF-15)

Extracellular matrix (ECM)-related adhesion proteins are important in metastasis. Ras suppressor-1 (RSU-1), a suppressor of Ras-transformation, is localized to cell–ECM adhesions where it interacts with the Particularly Interesting New Cysteine-Histidine rich protein (PINCH-1), being connected to Integrin Linked Kinase (ILK) and alpha-parvin (PARVA), a direct actin-binding protein. RSU-1 was also found upregulated in metastatic breast cancer (BC) samples and was recently demonstrated to have metastasis-promoting properties. In the present study, we transiently silenced RSU-1 in BC cells, MCF-7 and MDA-MB-231. We found that RSU-1 silencing leads to downregulation of Growth Differentiation Factor-15 (GDF-15), which has been associated with both actin cytoskeleton reorganization and metastasis. RSU-1 silencing also reduced the mRNA expression of PINCH-1 and cell division control protein-42 (Cdc42), while increasing that of ILK and Rac regardless of the presence of GDF-15. However, the downregulation of actin-modulating genes PARVA, RhoA, Rho associated kinase-1 (ROCK-1), and Fascin-1 following RSU-1 depletion was completely reversed by GDF-15 treatment in both cell lines. Moreover, complete rescue of the inhibitory effect of RSU-1 silencing on cell invasion was achieved by GDF-15 treatment, which also correlated with matrix metalloproteinase-2 expression. Finally, using a graph clustering approach, we corroborated our findings. This is the first study providing evidence of a functional association between RSU-1 and GDF-15 with regard to cancer cell invasion.

Atomic Force Microscopy on Biological Materials Related to Pathological Conditions

Atomic force microscopy (AFM) is an easy-to-use, powerful, high-resolution microscope that allows the user to image any surface and under any aqueous condition. AFM has been used in the investigation of the structural and mechanical properties of a wide range of biological matters including biomolecules, biomaterials, cells, and tissues. It provides the capacity to acquire high-resolution images of biosamples at the nanoscale and allows at readily carrying out mechanical characterization. The capacity of AFM to image and interact with surfaces, under physiologically relevant conditions, is of great importance for realistic and accurate medical and pharmaceutical applications. The aim of this paper is to review recent trends of the use of AFM on biological materials related to health and sickness. First, we present AFM components and its different imaging modes and we continue with combined imaging and coupled AFM systems. Then, we discuss the use of AFM to nanocharacterize collagen, the major fibrous protein of the human body, which has been correlated with many pathological conditions. In the next section, AFM nanolevel surface characterization as a tool to detect possible pathological conditions such as osteoarthritis and cancer is presented. Finally, we demonstrate the use of AFM for studying other pathological conditions, such as Alzheimer's disease and human immunodeficiency virus (HIV), through the investigation of amyloid fibrils and viruses, respectively. Consequently, AFM stands out as the ideal research instrument for exploring the detection of pathological conditions even at very early stages, making it very attractive in the area of bio- and nanomedicine.

Transforming growth factor-β modulates pancreatic cancer associated fibroblasts cell shape, stiffness and invasion

BACKGROUND

Tumor microenvironment consists of the extracellular matrix (ECM), stromal cells, such as fibroblasts (FBs) and cancer associated fibroblasts (CAFs), and a myriad of soluble factors. In many tumor types, including pancreatic tumors, the interplay between stromal cells and the other tumor microenvironment components leads to desmoplasia, a cancer-specific type of fibrosis that hinders treatment. Transforming growth factor beta (TGF-β) and CAFs are thought to play a crucial role in this tumor desmoplastic reaction, although the involved mechanisms are unknown.

METHODS

Optical/fluorescence microscopy, atomic force microscopy, image processing techniques, invasion assay in 3D collagen I gels and real-time PCR were employed to investigate the effect of TGF-β on normal pancreatic FBs and CAFs with regard to crucial cellular morphodynamic characteristics and relevant gene expression involved in tumor progression and metastasis.

RESULTS

CAFs present specific myofibroblast-like characteristics, such as α-smooth muscle actin expression and cell elongation, they also form more lamellipodia and are softer than FBs. TGF-β treatment increases cell stiffness (Young's modulus) of both FBs and CAFs and increases CAF's (but not FB's) elongation, cell spreading, lamellipodia formation and spheroid invasion. Gene expression analysis shows that these morphodynamic characteristics are mediated by Rac, RhoA and ROCK expression in CAFs treated with TGF-β.

CONCLUSIONS

TGF-β modulates CAFs', but not FBs', cell shape, stiffness and invasion.

GENERAL SIGNIFICANCE

Our findings elucidate on the effects of TGF-β on CAFs' behavior and stiffness providing new insights into the mechanisms involved.

Atomic force microscopy nano-characterization of 3D collagen gels with tunable stiffness

As extracellular matrix (ECM) nano-characteristics play a crucial role in cell behavior, including cancer development and metastasis, several ECM in vitro models have been used in order to study cells behavior under different biochemical and mechanical conditions. Among the ECM constituents, collagen (especially collagen type I) has been extensively used as an essential component of ECM models, since it is one of the most abundant ECM protein. Use of three-dimensional (3D) collagen gels provides the advantage of allowing the cells to grow in a 3D environment that bears strong similarities to their natural, in vivo setting. Thus, the ability to form collagen gels with tunable stiffness and well defined naturally occurring nano-characteristics is crucial for these studies. Atomic Force Microscopy (AFM) is a unique tool that is ideal for the complete characterization of such models, in terms of morphology and mechanical properties without destroying the collagen fiber structure. In this protocol, the development and the AFM nano-scale characterization of 3D collagen type I gels is presented. The protocol includes:

•

The formation of 3D collagen type I gels with tunable stiffness

•

The preparation of histological sections from collagen gels

•

The AFM-based morphological and mechanical nano-characterization of the gels

Imaging of Dental Hard Tissue Surfaces Prepared by an Ultrashort Pulsed Laser System (USPL)

The aim of this study was to compare surface structures of laser-irradiated dental hard tissues using confocal (CFM), atomic force (AFM), and scanning electron microscopy (SEM). The general potential of the AFM in analyzing laser-irradiated surfaces was determined in this context. Specimens of human enamel and dentin were irradiated using an 8.6 W Nd:YVO4 laser with a pulse duration of 8 ps, λ Center=1,064 nm, and a pulse repetition rate of 500 kHz. Surface topology of irradiated areas (1 mm2) was investigated using AFM, CFM, and SEM. Surface roughness R z was measured only with the AFM and the CFM. For non-irradiated enamel and dentin surfaces, roughnesses for CFM and AFM are in the nanometer range. However, major differences in roughness were determined for laser-prepared surfaces. For enamel, R z (CFM)=2.33 μm is much higher compared with R z (AFM)=0.09 μm; in the case of dentin, R z (CFM)=5.35 μm is also much higher compared with R z (AFM)=0.093 μm. Information regarding structural properties of surfaces needs real dimensions, particularly for use in dentistry. In this respect, AFM technology provides no additional results that lead to a significant improvement.