Biochemical changes on the repair of surgical bone defects grafted with biphasic synthetic micro-granular HA + β-tricalcium phosphate induced by laser and LED phototherapies and assessed by Raman spectroscopy

Effects of red and infrared laser on post extraction socket repair in rats subjected to alendronate therapy

This study evaluated the effect of photobiomodulation therapy (PBMT) with a red or infrared laser on the repair of post extraction sockets in rats administered alendronate (ALN). Forty male rats were randomly allocated into four groups: Control Group (CTR): subcutaneous administration of saline solution throughout the experimental period; Alendronate Group (ALN): subcutaneous administration of alendronate during the entire experimental period; Alendronate/Red Laser Group (ALN/RL): administration of ALN and irradiation with a GaAlAs laser (λ 660 nm); and Alendronate/Infrared Laser Group (ALN/IRL): administration of ALN and irradiation with a GaAlAs laser (λ 830 nm). The first lower molars were extracted 60 days after the beginning of the administration of the drugs. The PBMT was applied after tooth extraction (7 sessions with intervals of 48 hours between sessions). Thirty days after tooth extraction, the animals were euthanized. Micro-CT and histometric analysis were performed to assess the bone healing and soft tissue repair of the tooth socket. The ALN group presented with more bone than the CTR; however, most of this bone was necrotic. ALN does not affect the bone microarchitecture. On the other hand, PBMT with IRL enhances the bone density due to the increase in the number and reduction in the spacing of the trabeculae. The amount of vital bone and connective tissue matrix was higher in the ALN/RL and ALN/IRL groups than in the ALN and CTR groups. PBMT enhanced the healing of the post extraction sockets in rats subjected to ALN administration. Furthermore, IRL improved the new bone microarchitecture.

LED photobiomodulation therapy combined with biomaterial as a scaffold promotes better bone quality in the dental alveolus in an experimental extraction model

A bone scaffold added to the dental alveolus immediately after an extraction avoids bone atrophy and deformity at the tooth loss site, enabling rehabilitation with implants. Photobiomodulation accelerates bone healing by stimulating blood flow, activating osteoblasts, diminishing osteoclastic activity, and improving the integration of the biomaterial with the bone tissue. The aim of the present study was to evaluate the effect of photobiomodulation with LED at a wavelength of 850 nm on bone quality in Wistar rats submitted to molar extraction with and without a bone graft using hydroxyapatite biomaterial (Straumann® Cerabone®). Forty-eight rats were distributed among five groups (n = 12): basal (no interventions); control (extraction) (basal and control were the same animal, but at different sides); LED (extraction + LED λ = 850 nm); biomaterial (extraction + biomaterial), and biomaterial + LED (extraction + biomaterial + LED λ = 850 nm). Euthanasia occurred at 15 and 30 days after the induction of the extraction. The ALP analysis revealed an improvement in bone formation in the control and biomaterial + LED groups at 15 days (p = 0.0086 and p = 0.0379, Bonferroni). Moreover, the LED group had better bone formation compared to the other groups at 30 days (p = 0.0007, Bonferroni). In the analysis of AcP, all groups had less resorption compared to the basal group. Bone volume increased in the biomaterial, biomaterial + LED, and basal groups in comparison to the control group at 15 days (p < 0.05, t-test). At 30 days, the basal group had greater volume compared to the control and LED groups (p < 0.05, t-test). LED combined with the biomaterial improved bone formation in the histological analysis and diminished bone degeneration (demonstrated by the reduction in AcP), promoting an increase in bone density and volume. LED may be an important therapy to combine with biomaterials to promote bone formation, along with the other known benefits of this therapy, such as the control of pain and the inflammatory process.

Effect of S53P4 bioactive glass and low-level laser therapy on calvarial bone repair in rats submitted to zoledronic acid therapy

PURPOSE

To evaluate the influence of bioactive glass and photobiomodulation therapy (PBMT) in calvarial bone repair process in rats submitted to zoledronic acid therapy.

METHODS

Twenty-four rats were selected and treated with the dose of 0.035 mg/kg of zoledronic acid every two weeks, totalizing eight weeks, to induce osteonecrosis. After the drug therapy, surgical procedure was performed to create 5-mm diameter parietal bone defects in the calvarial region. The rats were then randomly assigned to groups according to the following treatments: AZC: control group, treated with blood clot; AZBIO: bone defect filled with bioactive glass; AZL: treated with blood clot and submitted to PBMT; and AZBIOL: treated with bioactive glass S53P4 and submitted to PBMT. Tissue samples were collected and submitted to histomorphometric analysis after 14 and 28 days.

RESULTS

At 14 days, bone neoformation in the AZBIO (52.15 ± 9.77) and AZBIOL (49.77 ± 13.58) groups presented higher values (p ≤ 0.001) compared to the AZC (23.35 ± 10.15) and AZL groups (23.32 ± 8.75). At 28 days, AZBIO (80.24 ± 5.41)still presented significant higher bone recovery values when compared to AZC (59.59 ± 16.92)and AZL (45.25 ± 5.41) groups (p = 0.048). In the 28-day period, the AZBIOL group didn't show statistically significant difference with the other groups (71.79 ± 29.38).

CONCLUSIONS

The bioactive glass is an effective protocol to stimulate bone neoformation in critical defects surgically created in rats with drug induced osteonecrosis, in the studied periods of 14 and 28 days.

Bone substitutes and photobiomodulation in bone regeneration: A systematic review in animal experimental studies

In general, bone fractures are able of healing by itself. However, in critical situations such as large bone defects, poor blood supply or even infections, the biological capacity of repair can be impaired, resulting in a delay of the consolidation process or even in non-union fractures. Thus, technologies able of improving the process of bone regeneration are of high demand. In this context, ceramic biomaterials-based bone substitutes and photobiomodulation (PBM) have been emerging as promising alternatives. Thus, the present study performed a systematic review targeting to analyze studies in the literature which investigated the effects of the association of ceramic based bone substitutes and PBM in the process of bone healing using animal models of bone defects. The search was conducted from March and April of 2019 in PubMed, Web of Science and Scopus databases. After the eligibility analyses, 16 studies were included in this review. The results showed that the most common material used was hydroxyapatite (HA) followed by Biosilicate associated with infrared PBM. Furthermore, 75% of the studies demonstrated positive effects to stimulate bone regeneration from association of ceramic biomaterials and PBM. All studies used low-level laser therapy (LLLT) device and the most studies used LLLT infrared. The evidence synthesis was moderate for all experimental studies for the variable histological analysis demonstrating the efficacy of techniques on the process of bone repair stimulation. In conclusion, this review demonstrates that the association of ceramic biomaterials and PBM presented positive effects for bone repair in experimental models of bone defects.

Effects of photobiomodulation on bone defects grafted with bone substitutes: A systematic review of in vivo animal studies

A present, photobiomodulation therapy (PBMT) effectiveness in enhancing bone regeneration in bone defects grafted with or without biomaterials is unclear. This systematic review (PROSPERO, ref. CRD 42019148959) aimed to critically appraise animal in vivo published data and present the efficacy of PBMT and its potential synergistic effects on grafted bone defects. MEDLINE, CCCT, Scopus, Science Direct, Google Scholar, EMBASE, EBSCO were searched, utilizing the following keywords: bone repair; low-level laser therapy; LLLT; light emitting diode; LEDs; photobiomodulation therapy; in vivo animal studies, bone substitutes, to identify studies between 1994 and 2019. After applying the eligibility criteria, 38 papers included where the results reported according to "PRISMA." The results revealed insufficient and incomplete PBM parameters, however, the outcomes with or without biomaterials have positive effects on bone healing. In conclusion, in vivo animal studies with a standardized protocol to elucidate the effects of PBMT on biomaterials are required initially prior to clinical studies.

The use of photobiomodulation therapy or LED and mineral trioxide aggregate improves the repair of complete tibial fractures treated with wire osteosynthesis in rodents

The repair of large bone defects is lengthy and complex. Both biomaterials and phototherapy have been used to improve bone repair. We aimed to describe histologically the repair of tibial fractures treated by wiring (W), irradiated or not, with laser (λ780 nm, 70 mW, CW, spot area of 0.5 cm², 20.4 J/cm² (4 × 5.1 J/cm², Twin Flex Evolution®, MM Optics, Sao Carlos, SP, Brazil) per session, 300 s, 142.8 J/cm² per treatment) or LED (λ850 ± 10 nm, 150 mW, spot area of 0.5 cm², 20.4 J/cm² per session, 64 s, 142.8 J/cm² per treatment, Fisioled®^, MM Optics, Sao Carlos, Sao Paulo, Brazil) and associated or not to the use of mineral trioxide aggregate (MTA, Angelus®, Londrina, PR, Brazil). Inflammation was discrete on groups W and W + LEDPT and absent on the others. Phototherapy protocols started immediately before suturing and repeated at every other day for 15 days. Collagen deposition intense on groups W + LEDPT, W + BIO-MTA + LaserPT and W + BIO-MTA + LEDPT and discrete or moderate on the other groups. Reabsorption was discrete on groups W and W + LEDPT and absent on the other groups. Neoformation varied greatly between groups. Most groups were partial and moderately filed with new-formed bone (W, W + LaserPT, W + LEDPT, W + BIO-MTA + LEDPT). On groups W + BIO-MTA and W + BIO-MTA + LaserPT bone, neoformation was intense and complete. Our results are indicative that the association of MTA and PBMT (λ = 780 nm) improves the repair of complete tibial fracture treated with wire osteosynthesis in a rodent model more efficiently than LED (λ = 850 ± 10 nm).

Raman spectroscopic study of the effect of the use of laser/LED phototherapy on the repair of complete tibial fracture treated with internal rigid fixation

This study aimed to assess the repair of complete surgical tibial fractures fixed with internal rigid fixation (IRF) associated or not to the use of mineral trioxide aggregate (MTA) cement and treated or not with laser (λ = 780 nm, infrared) or LED (λ = 850 ± 10 nm, infrared) lights, 142.8 J/cm² per treatment, by means of Raman spectroscopy. Open surgical tibial fractures were created on 18 rabbits (6 groups of 3 animals per group, ∼8 months old) and fractures were fixed with IRF. Three groups were grafted with MTA. The groups of IRF and IRF + MTA that received laser or LED were irradiated every other day during 15 days. Animals were sacrificed after 30 days, being the tibia surgically removed. Raman spectra were collected via the probe at the defect site in five points, resulting in 15 spectra per group (90 spectra in the dataset). Spectra were collected at the same day to avoid changes in laser power and experimental setup. The ANOVA general linear model showed that the laser irradiation of tibial bone fractures fixed with IRF and grafted with MTA had significant influence in the content of phosphate (peak ∼960 cm^-1) and carbonated (peak ∼1,070 cm^-1) hydroxyapatites as well as collagen (peak 1,452 cm^-1). Also, peaks of calcium carbonate (1,088 cm^-1) were found in the groups grafted with MTA. Based on the Raman spectroscopic data collected in this study, MTA has been shown to improve the repair of complete tibial fractures treated with IRF, with an evident increase of collagen matrix synthesis, and development of a scaffold of hydroxyapatite-like calcium carbonate with subsequent deposition of phosphate hydroxyapatite.

Examination of the Effect of the Combined Use of Nd: YAG Laser Irradiation and Mechanical Force Loading on Bone Metabolism Using Cultured Human Osteoblasts

Introduction: In recent years, laser irradiation in the near-infrared ray (NIR) area has been reported to promote bone healing. There are also reports that laser irradiation accelerates orthodontic tooth movement. In this study, we investigated the effect of NIR laser irradiation and mechanical stimulation on osteoblasts. Methods: We seeded osteoblast-like cells and laser irradiation was performed 24 hours after cell seeding. In addition, a control group not receiving anything, a group receiving only Nd: YAG (neodymium-doped yttrium aluminum garnet) laser irradiation, a group receiving only centrifugal loading, and a group receiving both Nd: YAG laser irradiation and centrifugal force loading were set, and after 24 hours and after 48 hours, cells were collected and quantitative real-time polymerase chain reaction (PCR) was performed. Results: 24 hours after laser irradiation, the gene expression of alkaline phosphatase (ALP), the receptor activator of NF-κB ligand (RANKL) and osteoprotegerin (OPG) was significantly higher in the 2.0 W group than in the control group. In addition, the RANKL/OPG ratio was higher in the 2.0 W group than in the control group. Also, in the group using laser irradiation and centrifugal loading in combination, 24 hours after laser irradiation, ALP and OPG showed significantly higher values than those in the centrifugal load only group. Furthermore, the RANKL/OPG ratio also showed high values. Conclusion: These results suggest that osteoblast-like cells activate genes related to bone metabolism by combining mechanical stimulation and laser irradiation. This helps to elucidate the influence of laser irradiation during tooth movement.

Photobiomodulation: lasers vs. light emitting diodes?

Photobiomodulation (PBM) is a treatment method based on research findings showing that irradiation with certain wavelengths of red or near-infrared light has been shown to produce a range of physiological effects in cells, tissues, animals and humans. Scientific research into PBM was initially started in the late 1960s by utilizing the newly invented (1960) lasers, and the therapy rapidly became known as "low-level laser therapy". It was mainly used for wound healing and reduction of pain and inflammation. Despite other light sources being available during the first 40 years of PBM research, lasers remained by far the most commonly employed device, and in fact, some authors insisted that lasers were essential to the therapeutic benefit. Collimated, coherent, highly monochromatic beams with the possibility of high power densities were considered preferable. However in recent years, non-coherent light sources such as light-emitting diodes (LEDs) and broad-band lamps have become common. Advantages of LEDs include no laser safety considerations, ease of home use, ability to irradiate a large area of tissue at once, possibility of wearable devices, and much lower cost per mW. LED photobiomodulation is here to stay.

Photobiomodulation: lasers vs. light emitting diodes?

Photobiomodulation (PBM) is a treatment method based on research findings showing that irradiation with certain wavelengths of red or near-infrared light has been shown to produce a range of physiological effects in cells, tissues, animals and humans. Scientific research into PBM was initially started in the late 1960s by utilizing the newly invented (1960) lasers, and the therapy rapidly became known as "low-level laser therapy". It was mainly used for wound healing and reduction of pain and inflammation. Despite other light sources being available during the first 40 years of PBM research, lasers remained by far the most commonly employed device, and in fact, some authors insisted that lasers were essential to the therapeutic benefit. Collimated, coherent, highly monochromatic beams with the possibility of high power densities were considered preferable. However in recent years, non-coherent light sources such as light-emitting diodes (LEDs) and broad-band lamps have become common. Advantages of LEDs include no laser safety considerations, ease of home use, ability to irradiate a large area of tissue at once, possibility of wearable devices, and much lower cost per mW. LED photobiomodulation is here to stay.