Enhancement of photo-bactericidal effect of tetrasulfonated hydroxyaluminum phthalocyanine on Pseudomonas aeruginosa

On the Synergism of Biogenic Gold Nanoparticles and Hydroxyaluminum Phthalocyanines in the Photoeradication of Staphylococcus aureus

Due to the unusual properties of gold nanoparticles, these structures are widely used in medicine and biology. This paper describes for the first time the synthesis of colloidal gold nanoparticles by the cell-free filtrate obtained from the Coriolus versicolor biomass and the use of these biogenic nanostructures to increase the photosensitizing efficiency of di- (AlPcS₂) and tetrasulfonated (AlPcS₄) hydroxyaluminum phthalocyanines in antibacterial photodynamic therapy. The obtained monodisperse particles were extremely stable, and this remarkable stability was due to the presence of phosphoprotein as a capping agent. The studied gold nanoparticles had a spherical shape, were uniformly distributed, and were characterized by a single plasmon band at wavelength of 514-517 nm. Almost 60% of the gold particles were found to be in the range of 13 to 15 nm. In accordance with the regulations of the American Microbiological Society, indicating that any antimicrobial technique must kill at least 3 log CFU (99.9%) to be accepted as "antimicrobial", this mortality of Staphylococcus aureus was shown to be achieved in the presence of AlPcS₄ + AuNPs mixture and 4.8 J cm^-2 light dose compared to AlPcS₄ alone, which required a light dose of 24 J cm^-2. The best effect of increasing the effectiveness of combating this pathogen was observed in the case of AlPcS₂ + AuNPs as a photosensitizing mixture. The light dose of 24 J cm^-2 caused a lethal effect of the studied coccus in the planktonic culture.

Nanoparticles as therapeutic options for treating multidrug-resistant bacteria: research progress, challenges, and prospects

Resistance to antimicrobial agents has been alarming in recent years and poses a huge public health threat globally according to the WHO. The increase in morbidity and mortality resulting from microbial infections has been attributed to the emergence of multidrug-resistant microbes. Associated with the increase in multidrug resistance is the lack of new and effective antimicrobials. This has led to global initiatives to identify novel and more effective antimicrobial agents in addition to discovering novel and effective drug delivery and targeting methods. The use of nanoparticles as novel biomaterials to fully achieve this feat is currently gaining global attention. Nanoparticles could become an indispensable viable therapeutic option for treating drug-resistant infections. Of all the nanoparticles, the metals and metal oxide nanoparticles appear to offer the most promise and have attracted tremendous interest from many researchers. Moreover, the use of nanomaterials in photothermal therapy has received considerable attention over the years. This review provides current insight on antimicrobial resistance as well as the mechanisms of nanoparticle antibacterial activity. It offers an in-depth review of all the recent findings in the use of nanomaterials as agents against multi-resistant pathogenic bacteria. Also, nanomaterials that can respond to light stimuli (photothermal therapy) to kill microbes and facilitate enhanced drug delivery and release are discussed. Moreover, the synergistic interactions of nanoparticles with antibiotics and other nanomaterials, microbial adaptation strategies to nanoparticles, current challenges, and future prospects were extensively discussed.

Gold Nanomaterials as a Promising Integrated Tool for Diagnosis and Treatment of Pathogenic Infections-A Review

This review summarizes research on functionalized gold nanomaterials as pathogen detection sensors and pathogen elimination integrated tools. After presenting the challenge of current severe threat from pathogenic bacteria and the increasingly serious growth rate of drug resistance, the first section mainly introduces the conspectus of gold nanostructures from synthesis, characterization, physicochemical properties and applications of gold nanomaterials. The next section deals with gold nanomaterials-based pathogen detection sensors such as colorimetric sensors, fluorescence sensors and Surface-Enhanced Raman Scattering sensors. We then discuss strategies based on gold nanomaterials for eliminating pathogenic infections, such as the dual sterilization strategy for grafting gold nanomaterials with antibacterial substances, photothermal antibacterial and photodynamic antibacterial methods. The fourth part briefly introduces the comprehensive strategy for diagnosis and sterilization of pathogen infection based on gold nanomaterials, such as the diagnosis and treatment strategy for pathogen infection using Roman signals real-time monitoring and photothermal sterilization. A concluding section that summarizes the current status and challenges of the novel diagnosis and treatment integrated strategy for pathogenic infections, gives an outlook on potential future perspectives.

The application of antimicrobial photodynamic inactivation on methicillin-resistant S. aureus and ESBL-producing K. pneumoniae using porphyrin photosensitizer in combination with silver nanoparticles

As resistance of bacterial strains to antibiotics is a major problem, there is a need to look for alternative treatments. One option is antimicrobial photodynamic inactivation (aPDI). The pathogenic cells are targeted by a nontoxic photosensitizer while the surrounding healthy tissue is relatively unaffected. The photosensitizer is activated by light of t appropriate wavelength resulting in the generation of reactive oxygen species that are cytotoxic for the pathogens. In this work, the photosensitizer TMPyP and silver nanoparticles (AgNPs) were investigated for their synergistic antibacterial effect. We tested these two substances on two bacterial strains, methicillin-resistant Staphylococcus aureus 4591 (MRSA) and extended-spectrum beta-lactamases-producing Klebsiella pneumoniae 2486 (ESBL-KP), to compare their effectiveness. The bacteria were first incubated with TMPyP for 45 min or 5 h, then irradiated with a LED source with the total fluence of 10 or 20 J/cm² and then placed in a microbiological growth medium supplemented with AgNPs. To accomplish the synergistic effect, the optimal combination of TMPyP and AgNPs was estimated as 1.56-25 μM for TMPyP and 3.38 mg/l for AgNPs in case of MRSA and 1.56-50 μM for TMPyP and 3.38 mg/l for AgNPs in case of ESBL-KP at 45 min incubation with TMPyP and fluence of 10 J/cm². Longer incubation and/or longer irradiation led to a decrease in the maximum values of the photosensitizer concentration to produce the synergistic effect. From this work it can be concluded that the combination of antimicrobial photodynamic inactivation with a treatment including silver nanoparticles could be a promising approach to treat bacterial infection.

Sulfonated hydroxyaluminum phthalocyanine-biogenic Au/Ag alloy nanoparticles mixtures for effective photo-eradication of Candida albicans

In response to the increasingly widespread resistance of fungi to traditional treatment, we have reported successful photodynamic inactivation of Candida albicans planktonic cells using di-(AlPcS₂) and trisulfonated (AlPcS₃) hydroxyaluminum phthalocyanines in combination with Au/Ag alloy nanoparticles synthesized by the cell-free filtrate of Trichoderma koningii. These nanostructures with Au:Ag molar ratios 2:1, 1:1 and 1:2 have individual plasmonic band at 513-515 nm, 505-509 nm and 486-489 nm, respectively. XPS analysis of the ratio of gold to silver on the surface of these alloys indicated that Au and Ag formed a bimetallic system, wherein Au was coated with Ag. The XRD pattern revealed the angles at 38.2, 44.5, 64.9 and 78.0°. TEM analysis indicated that the average diameter of the synthesized alloys was 9 ± 3 nm, 8 ± 3 nm and 16 ± 3 nm for structures with Au:Ag molar ratios 1:1, 1:2 and 2:1, respectively. The FTIR band absorption, SEM-EDS analysis and basic elemental composition obtained by XPS confirmed that these nanostructures are stabilized by protein(s). Diode laser with the peak-power wavelength ʎ = 650 nm (output power of 40 mW; power density of 105 mW cm^-2) was used as a light source. The mixture of AlPcS₂+Au/Ag-NPs (Au:Ag = 2:1) can be considered as an effective photosensitizer, because eradication of C. albicans, as required by the American Society of Microbiology (99.9 %), was achieved at a low dose of light of 31.5 J cm^-2. It was postulated that this low dose of light applied to the photo-induced fungicidal effect may be painless for potential patients.

A new methodology for simultaneous comparison and optimization between nanoparticles and their drug conjugates against various multidrug-resistant bacterial strains

Background

Multidrug-resistant bacteria are becoming more hazardous day by day for human health all over the world, and the scientific community is trying hard to resolve this issue by various approaches. One of the very common approaches is to bind drugs to nanoparticles and study enhanced antibacterial properties.

Objective

To compare simultaneously different types of nanoparticles, their concentration, bacterial strains and their incubation time intervals for each of the selected drug combination.

Methods

We have selected the most commonly used gold and silver nanoparticles and few examples from fluoroquinolone antibiotics to make their conjugates and study their efficacy against multidrug-resistant E. coli and S. aureus strains simultaneously, at different incubation time intervals and different concentration of nanoparticles.

Results

Gold nanoparticle hybrids do not show any significant effect. Silver nanoparticle hybrids show far better results, even at extremely low concentrations.

Conclusions

This unique and simple approach allows us to know the exact time intervals and concentration required for each nanoparticle combination to control the growth for any specific strain. This approach can be extended to any set of nanoparticles, drugs and bacterial strains for comparative purposes.

Emerging Strategies to Combat ESKAPE Pathogens in the Era of Antimicrobial Resistance: A Review

The acronym ESKAPE includes six nosocomial pathogens that exhibit multidrug resistance and virulence: Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp. Persistent use of antibiotics has provoked the emergence of multidrug resistant (MDR) and extensively drug resistant (XDR) bacteria, which render even the most effective drugs ineffective. Extended spectrum β-lactamase (ESBL) and carbapenemase producing Gram negative bacteria have emerged as an important therapeutic challenge. Development of novel therapeutics to treat drug resistant infections, especially those caused by ESKAPE pathogens is the need of the hour. Alternative therapies such as use of antibiotics in combination or with adjuvants, bacteriophages, antimicrobial peptides, nanoparticles, and photodynamic light therapy are widely reported. Many reviews published till date describe these therapies with respect to the various agents used, their dosage details and mechanism of action against MDR pathogens but very few have focused specifically on ESKAPE. The objective of this review is to describe the alternative therapies reported to treat ESKAPE infections, their advantages and limitations, potential application in vivo, and status in clinical trials. The review further highlights the importance of a combinatorial approach, wherein two or more therapies are used in combination in order to overcome their individual limitations, additional studies on which are warranted, before translating them into clinical practice. These advances could possibly give an alternate solution or extend the lifetime of current antimicrobials.