Effect of CO2 laser (10.6 μm) and Remin Pro on microhardness of enamel white spot lesions

Fluoride-amorphous calcium phosphate and biomimetic nano-hydroxyapatite for enamel remineralization: An in-vitro study of surface microhardness and composition

AIM

Fluoride-Amorphous Calcium Phosphate and Biomimetic Nano-Hydroxyapatite for Enamel Remineralization; An In-Vitro Study of Surface Microhardness and Composition.

MATERIAL AND METHODS

Ninety-six extracted human premolars with sound buccal surface were divided using a randomization computer-generating software into four groups; Group I (control) sound untreated enamel, Group II (demineralized) demineralized to create white spot lesions, Group III (biom-n-HA) demineralized and then treated with biomimetic nanohydroxyapatite cream, and Group IV (F-ACP) demineralized and then treated using Fluoride-Amorphous Calcium Phosphate varnish. Each group was divided into two subgroups; subgroup "A" evaluated for mineral content using energy dispersive x-ray spectroscopy (EDX) and for surface microhardness using the Vickers microhardness test and Subgroup "B" evaluated for white spot lesion depth using a polarized light microscope (PLM).

RESULTS

The highest microhardness (VHN) was found in the (F-ACP) group (mean=428.61±54.43) and then in the (Biom-n-HA) group (mean=408.11±70.16) followed by the (Control) group (mean=402.13±53.40) with no significant difference between them and finally in the significantly different (Demineralized) group (mean=256.99±45.83). The weight percentage of Ca (30.29±1.04 and 33.44±1.07) and Ca/P ratio (1.87±0.06 and 2.03±0.05) were significantly different between Group III and Group IV respectively. PLM measurements in Group II (198.83μm), Group III (60.17μm), and Group IV (26.33μm) were significantly different.

CONCLUSIONS

Both the (Biom-n-HA) cream and the (F-ACP) varnish showed promising results for enamel remineralization. The increased enamel surface microhardness was consistent with the mineral content and the changes in the birefringence.

Enamel Remineralization Efficacy of Coconut Milk and Lyophilized Coconut Extract in Different Concentrations on Demineralized Enamel Surfaces: An In-Vitro Study

Aim The current study's objective is to determine the remineralizing efficacy of freeze-dried lyophilized coconut extract and coconut milk made from freshly grated coconut on artificial carious lesions produced by pH cycling. Materials and methods Freshly extracted coconut pulp was split into two parts. The first half was blended to obtain coconut milk, and the second part was freeze-dried and lyophilized. Tooth slabs were prepared from extracted third molar teeth. After being demineralized for 72 hours, the tooth samples were remineralized by submerging them in the appropriate remineralizing solution, which is as follows: Group 1 received 25 mL of the Remineralization solution (the control); Group 2 received 2.5 g of coconut milk and 25 mL of the solution (1:1); and Group 3 received 5 g of coconut milk and 25 mL of the solution (2:1). 2.5 g of freeze-dried, lyophilized coconut extract was given to Group 4 along with 25 mL of remineralization solution (1:1), and 5 g of freeze-dried, lyophilized coconut extract was given to Group 5 along with 25 mL of remineralization solution (2:1). Microhardness and contact angle measurements were made. An Excel spreadsheet was filled up with values from after demineralization, and after remineralization. A statistical analysis was performed using SPSS 26.0 (IBM Corp., Armonk, NY). Using descriptive statistics, the pretreatment mean values for the microhardness and contact angle of the various groups were evaluated. Post-hoc Tukey tests were utilized to compare the analytic results of the various groups. Results Among the various concentrations of freshly extracted coconut milk, the contact angle in concentrations of 1:1 was 81.22 ± 1.62 deg, and that in concentrations of 2:1 was 88.01 ± 1.85 deg. Between the two concentrations of the lyophilized coconut extract group, the contact angle in 1:1 was 75.05 ± 2.29 deg, and in 2:1 was 71.37 ± 0.85 deg. In the coconut milk group, the value of microhardness was 261 ± 6.4 kg/cm2 at a lower concentration and 322 ± 3.9 kg/cm2 at a higher concentration. In the lyophilized coconut group, the lower concentration exhibited a microhardness of 211 ± 7.2 kg/cm2, whereas in the higher concentration, it was 324 ± 4.04 kg/cm2. Conclusion Of the various concentrations of coconut milk and lyophilized coconut used, coconut milk at a higher concentration exhibits the highest contact angle, and the latter at a higher concentration exhibits the lowest contact angle. In both groups, high concentrations of the material exhibited high microhardness values compared to lower concentrations of the same.

Effect of sodium fluoride plus tricalcium phosphate with and without CO2 laser on remineralization of white spot lesions

Objectives

The aim of this in vitro study was to evaluate the effect of NaF plus TCP with and without CO₂ laser irradiation on management of demineralized enamel using microhardness test and digital microscopy.

Methods

Eighty intact extracted human premolar teeth were randomly divided into 4 groups (20/each). Each group was subjected to a demineralizing solution to create white spot lesion. Group 1 was treated with 3M Vanish™. Group 2 was irradiated with CO₂ laser. Group 3 was subjected to CO₂ laser followed by 3M Vanish™. Group 4 was treated by 3M Vanish™ then CO₂ laser. The teeth were immersed in artificial saliva. Surface microhardness was measured for each tooth before demineralization at base line (M1 as a control), after demineralization (M2) and after management (M3). Comparison of microhardness values between groups was performed using one way ANOVA test with significant level (0.05) followed by multiple comparisons post-hoc Tukey test between groups. Enamel surface was photographed by digital microscope.

Results

All intervention methods used in the current study significantly increased microhardness values of demineralized enamel (P < 0.001). Little improvement of enamel appearance was observed in all groups meanwhile using CO₂ laser on demineralized enamel directly led to signs of white and black dots affecting the appearance of enamel surface.

Significance

The most effective intervention regarding microhardness was group 2 followed by group 3, group 4 and group 1. Coating the enamel surface with 3M Vanish™ before CO₂ laser irradiation acted as a protective layer from the undesirable effects of laser on the teeth with increasing enamel microhardness values more than using Vanish alone. So the promising intervention method regarding both microhardness and appearance was group 4.

Comparison of the effect of fluoride gel and two toothpastes with different materials on remineralization of initial carious lesions in primary teeth

Introduction:

Various types of toothpastes are claimed to be able to improve initial enamel caries. This study compared the effect of fluoride gel and two toothpastes on remineralization of initial caries lesions in primary teeth.

Materials and Methods:

A total of sixty-four sound extracted primary canine were immersed in demineralizing solution at 37°C for 96 h to produce artificial caries in vitro. Enamel pieces (3 × 3 × 5 mm) were prepared from each tooth and mounted in self cure acrylic blocks. The specimens were randomly assigned to four groups (n = 16) based on treatment agent (fluoride gel, Chitodent toothpaste, ReminPro toothpaste, no treatment as control) and underwent a pH cycling model for 10 days. Vickers microhardness (VH) was measured before and after treatment. Data was analyzed using analysis of variance and paired t-test by SPSS 18 (P < 0.05).

Results:

No significant difference was found in VH between groups at baseline (fluoride group: 265.9 ± 44.8, Chitodent group: 282.6 ± 34.6, ReminPro group: 266.5 ± 26.6, control: 272.7 ± 32.5; P = 0.516). Microhardness significantly increased after exposure to ReminPro toothpaste (VH change: 24.1%, P < 0.001) and fluoride gel (VH change: 10.9%, P = 0.046), but no significant changes were observed in Chitodent (VH change: 2.8%, P = 0.635) and control (VH change: - 2.2%, P = 0.181) groups.

Conclusion:

ReminPro toothpaste might be effective in remineralizing initial carious lesions of primary teeth.

Rehardening of Eroded Enamel with CPP-ACFP Paste and CO2 Laser Treatment

BACKGROUND

Diet and lifestyle can destroy tooth structure due to the dissolution of enamel by acidic beverages. The present study evaluated the effect of CO2 laser irradiation and CPP-ACFP (casein phosphopeptide and amorphous calcium phosphate with fluoride) paste on the remineralization of enamel eroded by carbonated soft drinks.

METHODS

In the present in vitro study, 46 human sound premolar teeth were sectioned mesiodistally to achieve 84 samples. Fourteen samples were assigned to the positive control group (G1), and the remaining samples were immersed in 500 mL of cola drink for 2 minutes, followed by rinsing with distilled water for 10 seconds. This procedure was carried out three times to create erosive lesions. Then, the 60 eroded samples were randomly assigned to five groups of G2 to G6 in terms of the treatment as follows: negative control (G2), CO2 laser irradiation (G3), CPP-ACFP paste (G4), CO2 laser irradiation followed by CPP-ACFP paste application (G5), and CPP-ACFP paste application followed by CO2 laser irradiation (G6). The mean surface microhardness of the enamel surface was evaluated and determined at three points for each sample. Data were analyzed with one-way ANOVA and Tukey HSD tests (α = 0.05).

RESULTS

The highest and the lowest hardness values were recorded in the G1 (314 ± 12 kg/mm2) and G2 (213.7 ± 12 kg/mm2) groups, respectively. ANOVA revealed significant differences between the study groups (P < 0.001). Two-by-two comparisons showed significant differences between the G2 group and the other groups, indicating the efficacy of all the treatment modalities in tooth remineralization and rehardening procedures (P < 0.05). Only in group G6, the enamel microhardness was not significantly different from the G1 positive control group (P > 0.05).

CONCLUSION

Considering the parameters used in the present study, CO2 laser irradiation or CPP-ACFP paste application alone increased eroded enamel's surface hardness; however, their sequential application was more effective in rehardening the eroded enamel's surface to near-normal levels.