Effective microbiological decontamination of dental healing abutments colonised with Rothia aeria by a diode laser as a helpful step towards successful implantoprosthetic therapy

Optimization of the Process of Eliminating Microorganisms Harmful to Human Health and Threatening Objects Isolated from Historical Materials from the Auschwitz-Birkenau State Museum in Poland (A-BSM) Collection with the Use of Ethanol in the Form of Mist

The aim of the study was to assess the biocidal effectiveness and the effect of 80% and 90% ethanol applied in the form of mist on the surface of textile materials from historical A-BSM objects. The microorganisms used for the tests, namely, Cladosporium cladosporioides, Aspergillus niger and Penicillium chrysogenum, were isolated from the surface of textile objects in the A-BSM. Bacillus subtilis, Staphylococcus aureus, Aspergillus flavus and Aspergillus niger were also used from the American Type Culture Collection (ATCC). Fabric samples were inoculated with microorganisms at a concentration of 10⁵-10⁶ CFU/ml. Ethanol in the form of mist was applied in concentrations of 80% and 90%. Airbrushes VL 0819 and VE 0707 were used for this purpose, where the pressure was 0.2 MPa and the PA HEAD VLH-5 nozzle with a tip of 1.05 mm in diameter was used. In order to achieve more effective disinfection after applying the ethanol mist, samples were stored in PE foil in the conditions of 21 °C ± 1 °C for 22 ± 1 h. After applying the ethanol mist, changes in the properties of the materials were assessed using scanning electron microscopy (SEM). The reduction in the number of microorganisms on modern cotton fabric after the use of ethanol in the form of mist at concentrations of 80% and 90% ranged from 93.27% to 99.91% for fungi and from 94.96% to 100% for bacteria, except for 74.24% for B. subtillis. On the historical fabric, after the time of application of 90% ethanol was shortened to 4 s, the microorganisms were reduced by over 99.93% and S. aureus was completely eliminated. After applying the tested disinfection technique, no changes in fiber morphology were observed on the surface of the model and historical cotton.

Evaluation of the Tooth Surface after Irradiation with Diode Laser Applied for Removal of Dental Microorganisms from Teeth of Patients with Gingivitis, Using X-ray Photoelectron (XPS) and Optical Profilometry (OP)

Gingivitis is accompanied by microorganisms, including pathogens, which must be eliminated to speed up the treatment of inflammation. Laser irradiation may be one of the safe methods for reducing tissue contamination on the tooth surface. The aim of the study was the assessment of the tooth surface in patients with gingivitis after the use of a diode laser to eliminate microorganisms living there. In the first stage of the research, microorganisms were isolated (Candida albicans, C. guilliermondii, Escherichia coli, Haemophilus parainfluenzae, Klebsiella oxytoca, Neisseria subflava, Rothia dentocariosa, Rothia mucilaginosa, Streptococcus pneumoniae) from three patients with gingivitis, their identification confirmed using the MALDI-TOF MS technique (matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry). Then, the irradiation process with a diode laser was optimized to a wavelength of 810 nm ± 10 nm in five variants to reduce microorganisms on the tooth. The tooth surface was analyzed by X-ray photoelectron spectroscopy (XPS) and optical profilometry (OP) before and after irradiation. 103 to 106 CFU were detected on a 0.4 cm² tooth area. Nine types of bacteria and two types of fungi dominated among the microorganisms. The laser at the most effective biocidal dose of 25 W/15.000 Hz/10 µs, average = 3.84 W, with three uses after 15 s, increased the reduction of fungi from 57.97% to 93.80%, and bacteria from 30.67% to 100%. This dose also caused a decrease in the degree of oxidation and in the effect of smoothing on the treated surfaces.

Analysis of the Microbiome on the Surface of Corroded Titanium Dental Implants in Patients with Periimplantitis and Diode Laser Irradiation as an Aid in the Implant Prosthetic Treatment: An Ex Vivo Study

The paper presents the optimization of diode laser irradiation of corroded dental implants in order to reduce the number of microorganisms associated peri-implantitis. The research included the identification of microorganisms on the surface of removed dental implants in patients with peri-implantitis and the assessment of the biocidal effectiveness of the diode laser against these microorganisms. Laser desorption/mass spectrometry (MALDI-TOF MS) was used to identify microorganisms and metagens were examined by next generation sequencing (NGS). Irradiation was performed with a diode laser with a wavelength of λ = 810, operating mode: 25 W/15.000 Hz/10 μs, average = 3.84 W with the number of repetitions t = 2 × 15 s and t = 3 × 15 s. The structure and surface roughness of the implants were analysed before and after laser irradiation by optical profilometry and optical microscopy with confocal fixation. In total, 16 species of Gram-positive bacteria and 23 species of Gram-negative bacteria were identified on the surface of the implants. A total of 25 species of anaerobic bacteria and 12 species with corrosive potential were detected. After diode laser irradiation, the reduction in bacteria on the implants ranged from 88.85% to 100%, and the reduction in fungi from 87.75% to 96.77%. The reduction in microorganisms in the abutment was greater than in the endosseous fixture. The applied laser doses did not damage, but only cleaned the surface of the titanium implants. After 8 years of embedding, the removed titanium implant showed greater roughness than the 25-year-old implant, which was not exposed to direct influence of the oral cavity environment. The use of a diode laser in an optimised irradiation dose safely reduces the number of microorganisms identified on corroded dental implants in patients with peri-implantitis.

Diode Laser as an Adjunctive Treatment for Peri-implant Mucositis: A Systematic Review and Meta-analysis

The early detection and management of peri-implant mucositis may help in reducing inflammatory parameters and arrest disease progression to peri-implantitis. The potential therapeutic benefits of different adjunctive therapies, such as the diode laser, are still not completely understood. The objective of this systematic review and meta-analyses was to assess the outcomes of using diode laser on the management of peri-implant mucositis in terms of changes in periodontal parameters. Electronic databases were searched to identify randomised controlled trials (RCTs) that compared the combined use of mechanical debridement and diode laser with mechanical debridement alone. A specific risk-of-bias tool was used to assess the risk of bias. Data were analysed using a statistical software programme. In total, 149 studies were found. A meta-analysis of 3 RCTs showed no statistically significant differences in probing pocket depths (mean difference [MD], −0.36; 95% confidence interval [CI], −0.88 to 0.16; P = .18) or bleeding on probing (MD, −0.71; 95% CI, 1.58–0.16; P = .11) between the 2 groups at 3 months. In the management of peri-implant mucositis, the combined use of diode laser and mechanical debridement did not provide any additional clinical advantage over mechanical debridement alone. Long-term, well-designed RCTs are still needed.

The Use of the Diode Laser against the Microbiome on Composites Closing the Screw Access Hall (Sah) in the Reconstruction of Dental Implants: Ex Vivo Studies

Patients undergoing implant treatment are at risk of peri-implant bone loss, which is most often caused by the adverse effects of microorganisms, but there are few proven procedures for their reduction. The aim of the research was to identify the microorganisms inhabiting the composites used to close the screw access hole (SAH), compare them numerically with those present on the surface of crowns and teeth, and optimize the doses of the diode laser, which will reduce microorganisms and will not deteriorate the roughness of polished composites. Patients were swabbed from the surface of SAH composites, from porcelain and zirconium restorations, and from teeth, and then the number of microorganisms was determined by using a culture technique. Microorganisms were identified by MALDI–TOF MS and NGS sequencing. The effectiveness of diode laser irradiation was achieved by using four variants of exposure. After polishing and laser irradiation, the surface roughness of the composites was studied by using optical profilometry. On the surface of SAH, 10⁶ to 10⁸ microorganisms were identified at 0.4 cm², including many pathogenic species. Among the materials used for the reconstruction of dental implants, the greatest microbiological contamination was found on the composites used to close the SAH. The diode laser with a wavelength of 810 nm with an average power of 3.84 W, during 60 s and 2 × 30 s, has a biocidal effect and does not significantly change the surface roughness of composites. The best reduction of microorganisms was achieved on a composite polished with a polishing rubber and then with a Sof-Lex™ Pre-Polishing Spiral beige (3M ESPE, Ave. St. Paul., MN, USA). Studies have shown that using the optimal laser dose can help treat periimplantitis. These studies provide important information on the possibility of the effective elimination of microorganisms by using a diode laser in the treatment of peri-implant bone loss.

The Efficacy of a Diode Laser on Titanium Implants for the Reduction of Microorganisms That Cause Periimplantitis

The paper presents the optimisation of a safe diode laser irradiation process applied to the surface of titanium implants in order to reduce microbial numbers in the treatment of inflammation classified as periimplantitis. The study comprised isolation and identification of microorganisms inhabiting surfaces of dental implants, crowns, teeth and saliva from patients with fully symptomatic periimplantitis. Microorganisms were detected by a culture-dependent method and identified with the use of MALDI-TOF mass spectrometry. The isolated microorganisms were inoculated on the surface of a new implant and then irradiated by a diode laser (wavelength of 810 ± 10 nm) in one, two or three repetitions and biocidal efficacy was assessed. To evaluate impact of laser irradiation on roughness, morphology and structure of the implant surface, optical profilometry, scanning electron microscopy and optical microscopy were used. Examination of the tested surfaces and saliva revealed the presence of Gram-positive and Gram-negative bacteria and one fungal species. In all patients, cultures from the endosseous part of the implant revealed the presence of the pathogenic and pyogenic bacterium Streptococcus constellatus. In 13 out of 20 samples laser-irradiated in duplicate and triplicate, all microorganisms were eliminated. The irradiation used did not cause any changes in the properties of the implant surface.

The Use of a Diode Laser for Removal of Microorganisms from the Surfaces of Zirconia and Porcelain Applied to Superstructure Dental Implants

The aim of this paper was to study the effectiveness of a diode laser (LD) for removal of microorganisms isolated from porcelain and zirconia crown surfaces used in implantoprosthetics in order to minimize infections around dental implants. In order to optimize biocidal efficacy of the process (at the same time, avoiding increasing the surface roughness during decontamination) the effects of diode laser doses were investigated. The irradiation was performed with a diode laser at the wavelength of λ = 810 nm in three variants with a different number of repetitions (1 × 15 s, 2 × 15 s, 3 × 15 s). The quantitative microbial contamination of the surface of teeth, porcelain and zirconia crowns assessment was made using the culture-dependent method. The identification of microorganisms took place using the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and next-generation sequencing (NGS) methods. The studies of the surface morphology and roughness were carried out by means of the optical profilometry, scanning electron microscopy (SEM) and optical microscopy with the C1 confocal attachment. The most important conclusion from the research is the fact that the laser operation, regardless of the exposure time, effectively eliminates the microorganisms from the surfaces used for dental implant rebuilding and does not have a destructive effect on the tested material.