Poly(ethylene terephthalate)/carbon black composite fibers prepared by electrospinning

Green-Solvent-Processable Composite Micro/Nanofiber Membrane with Gradient Asymmetric Structure for Efficient Microfiltration

Electrospinning technology has attracted extensive attention in recent decades and is widely used to prepare nanofiber membranes from hundreds of polymers. Polyvinyl formal acetal (PVFA), as a polymer with excellent properties such as high strength and heat resistance, is not reported on the electrospun water treatment membrane. In this paper, the preparation process of electrospun PVFA nanofiber membrane is optimized, and the effect of sodium chloride (NaCl) addition on the physical and mechanical properties and microfiltration performance of nanofiber membrane is also explored. And the hydrophobic PVFA nanofiber filter layer is then combined with a hydrophilic nonwoven support layer to construct a composite micro/nanofiber membrane with a pore-size gradient structure and a hydrophilic/hydrophobic asymmetric structure. Finally, unidirectional water transport and water treatment performance are further investigated. The results show that the tensile breaking strength of the composite membrane can reach up to 37.8 MPa, the retention rate for particles with the size of 0.1-0.3 µm is 99.7%, and the water flux is 513.4 L m-2 h-1 under the hydrostatic pressure. Moreover, it still has a retention of more than 98% after three repeated uses. Therefore, the electrospun PVFA composite membrane has a great potential in microfiltration.

Effect of the flame-retardant 3-hydroxyphenylphosphinyl-propanoic acid on the mechanical, thermal, and flammability properties of poly(ethylene terephthalate) nanofiber mats

The structure, thermal stability, and mechanical properties of electrospun nanofiber mats obtained from poly(ethylene terephthalate) (PET) solutions in trifluoroacetic acid/dichloromethane were evaluated. The electrospun PET nanofibers were characterized by means of attenuated total reflection Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis, limiting oxygen index, and tensile testing. PET-3-hydroxyphenylphosphinyl-propanoic acid (HPP) copolymer was used as the flame-retardant (FR) agent to improve the thermal stability and flammability of the nanofiber mats. HPP is a commercial FR for polyesters which was studied from the viewpoint of chemical reactivity and reaction mechanism. To enhance the tensile strength of the nanofiber mats, the nanofibers were collected on high-speed rotating drum. The results showed that the nanofibers were oriented, and their strength was enhanced by increasing the velocity of the collector. The average diameter of electrospun nanofibers was in the range of 110–240 nm, decreasing with the increasing drum speed. Also the mean pore size of the mats decreased significantly with increasing orientation of the nanofibers. The results showed that HPP improved the flame retardancy of PET.

Phosphorus-doped NiCo2S4 nanocrystals grown on electrospun carbon nanofibers as ultra-efficient electrocatalysts for the hydrogen evolution reaction

The development of highly efficient noble-metal-free electrocatalysts for the hydrogen evolution reaction (HER) is still a challenge nowadays. In this work, we prepared a highly active electrocatalyst containing phosphorus-doped NiCo₂S₄ nanocrystals grown on carbon nanotube embedded carbon nanofibers (P-NiCo₂S₄@CNT/CNF). The CNTs are involved in enhancing the electrical conductivity of the three-dimensional CNF network through a facile co-electrospinning method, which can facilitate electron transfer to the attached HER active material. Templated by this nanofiber network, the electroactive NiCo₂S₄ is confined to grow perpendicularly onto the CNT/CNF template via a hydrothermal reaction, thus exposing more catalytic active sites. Doping of P into the hybrid via a phosphidation reaction improves the electronic structure of the electroactive NiCo₂S₄, thus decreasing the energy barrier during the HER process. Owing to the synergistic effects from electrical enhancement and the nanostructured morphology, along with P-doping-induced optimization of the electronic structure, the P-NiCo₂S₄@CNT/CNF hybrid exhibits excellent HER performance, with an ultra-low onset overpotential (η) of 27 mV, a remarkable current density of 10 mA cm^-2 at η as low as 74 mV, an impressive exchange current density of 0.79 mA cm^-2 and excellent long-term durability. Furthermore, its electroactivity exceeds that of most reported noble-metal-free electrocatalysts and is comparable to that of Pt, suggesting its great potential as a highly efficient HER catalyst.

Elastic Carbon Aerogels Reconstructed from Electrospun Nanofibers and Graphene as Three-Dimensional Networked Matrix for Efficient Energy Storage/Conversion

Three-dimensional (3D) all-carbon nanofibrous aerogels with good structural stability and elasticity are highly desirable in flexible energy storage/conversion devices. Hence, an efficient surface-induced co-assembly strategy is reported for the novel design and reconstruction of electrospun nanofibers into graphene/carbon nanofiber (CNF) composite aerogels (GCA) with hierarchical structures utilizing graphene flakes as cross-linkers. The as-obtained GCA monoliths possess interconnected macropores and integrated conductive networks, which exhibit high elasticity and great structural robustness. Benefitting from the largely increased surface area and charge-transfer efficiency derived from the multi-form firm interconnections (including pillaring, bridging and jointing) between graphene flakes and CNF ribs, GCA not only reveals prominent capacitive performance as supercapacitor electrode, but also shows excellent hydrogen evolution reaction activity in both acidic and alkaline solutions as a 3D template for decoration of few-layered MoSe2 nanosheets, holding great potentials for energy-related applications.

Electrospun carbon nanofiber@CoS2 core/sheath hybrid as an efficient all-pH hydrogen evolution electrocatalyst

CNF@CoS₂ hybrids with a core/sheath hierarchical structure have been successfully fabricated for use as efficient all-pH HER electrocatalysts.

A highly flexible and conductive graphene-wrapped carbon nanofiber membrane for high-performance electrocatalytic applications

Graphene-wrapped electrospun carbon nanofiber membranes with greatly improved electrical conductivity have been synthesized through an effective surface-induced assembly strategy.