Spectral insights into microdynamics of thermoresponsive polymers from the perspective of two-dimensional correlation spectroscopy

Tailoring tetrahedral and pair-correlation entropies of glass-forming liquids for energy storage applications at ultralow temperatures

Aqueous solution experiences either crystallization or vitrification as being cooled, yet the mechanism of this bifurcation is confused. Since the glass-transition temperature Tg is much lower than the melting temperature, we herein propose an entropy-driven glass-forming liquid (EDGFL) as an attractive concept to develop anti-freezing electrolytes. The Tg is delicately modulated via regulating local structural orders to avoid the energy-driven ice crystallization and enter an entropy-driven glass transition, which can be theoretically explained by the competitive effect between tetrahedral entropy of water and pair correlation entropy related to ions. The constructive EDGFL with a low Tg of -128 °C and a high boiling point of +145 °C enables stable energy storage over an ultra-wide temperature range of -95~+120 °C, realizes superior AC linear filtering function at -95 °C, and helps improve the performance of aqueous Zn-ion batteries at ultralow temperatures. This special electrolyte will provide both theoretical and practical directions for developing anti-freezing energy storage systems adapting to frigid environment.

Making Sticky-Slippery Switchable Fluorogels Through Self-Adaptive Bicontinuous Phase Separation

Developing gel materials with tunable frictional properties is crucial for applications in soft robotics, anti-fouling, and joint protection. However, achieving reversible switching between extreme sticky and slippery states remains a formidable challenge due to the opposing requirements for energy dissipation on gel surfaces. Herein, a self-adaptive bicontinuous fluorogel is introduced that decouples lubrication and adhesion at varying temperatures. The phase-separated fluorogel comprises a soft fluorinated lubricating phase and a stiff yet thermal-responsive load-bearing phase. At ambient temperature, the fluorogel exhibits a highly slippery surface owing to a low-energy-dissipating lubricating layer, demonstrating an ultralow friction coefficient of 0.004. Upon heating, the fluorogel transitions into a highly dissipating state via hydrogen bond dissociation, concurrently releasing adhesive dangling chains to make the surface highly sticky with an adhesion strength of ≈362 kPa. This approach provides a promising foundation for creating advanced adaptive materials with on-demand self-adhesive and self-lubricating capabilities.

Transforming Commercial Polymers into Tough yet Switchable Adhesives by Trident Photoswitch Molecule Doping: Break Adhesion-Switchability Paradox

Here, a trident molecule doping strategy is introduced to overcome both cohesion-adhesion trade-off and adhesion-switchability conflict, transforming commercial polymers into tough yet photo-switchable adhesives. The strategy involves initial rational design of new trident photoswitch molecules namely TAzo-3 featuring azobenzene and hydroxy-terminated alkyl chains involved rigid-soft tri-branch structure, and subsequent doping into commercial polycaprolactone (PCL) via simple blending. Unique design enables TAzo-3 as a versatile dopant, not only regulating the internal and external supramolecular interaction to balance cohesion and interface adhesion for tough bonding, but also affording marked photothermal effect to facilitate rapid adhesive melting for great photo-switchability. Thus, the optimal TAzo-3-doped PCL (TAzo-3@P) displays markedly-improved bonding performance on diverse substrates compared to linear azobenzene-doped PCL and pure PCL. Impressively, TAzo-3@P on polymethyl methacrylate (PMMA) attains large room-temperature adhesion strength of 6.7 MPa - surpassing most reported adhesives and many commercial adhesives on PMMA, along with easy photo-induced detachment with remarkable switch ratio of 2.09 × 105. Besides, TAzo-3@P can also act as "permanent" adhesives for only adhesion, demonstrating excellent multi-reusability, anti-freezing and waterproof ability. Mechanism studies unveil that the switchable adhesion is closely linked with the dopant molecule structure while rigid-soft coupled trident structures and hydroxy-terminated alkyl chains are key factors.

Concentration-induced spontaneous polymerization of protic ionic liquids for efficient in situ adhesion

The advancement of contemporary adhesives is often limited by the balancing act between cohesion and interfacial adhesion strength. This study explores an approach to overcome this trade-off by utilizing the spontaneous polymerization of a protic ionic liquid-based monomer obtained through the neutralization of 2-acrylamide-2-methyl propane sulfonic acid and hydroxylamine. The initiator-free polymerization process is carried out through a gradual increase in monomer concentration in aqueous solutions caused by solvent evaporation upon heating, which results in the in-situ formation of a tough and thin adhesive layer with a highly entangled polymeric network and an intimate interface contact between the adhesive and substrate. The abundance of internal and external non-covalent interactions also contributes to both cohesion and interfacial adhesion. Consequently, the produced protic poly(ionic liquid)s exhibit considerable adhesion strength on a variety of substrates. This method also allows for the creation of advanced adhesive composites with electrical conductivity or visualized sensing functionality by incorporating commercially available fillers into the ionic liquid adhesive. This study provides a strategy for creating high-performance ionic liquid-based adhesives and highlights the importance of in-situ polymerization for constructing adhesive composites.

Self-compliant ionic skin by leveraging hierarchical hydrogen bond association

Robust interfacial compliance is essential for long-term physiological monitoring via skin-mountable ionic materials. Unfortunately, existing epidermal ionic skins are not compliant and durable enough to accommodate the time-varying deformations of convoluted skin surface, due to an imbalance in viscosity and elasticity. Here we introduce a self-compliant ionic skin that consistently works at the critical gel point state with almost equal viscosity and elasticity over a super-wide frequency range. The material is designed by leveraging hierarchical hydrogen bond association, allowing for the continuous release of polymer strands to create topological entanglements as complementary crosslinks. By embodying properties of rapid stress relaxation, softness, ionic conductivity, self-healability, flaw-insensitivity, self-adhesion, and water-resistance, this ionic skin fosters excellent interfacial compliance with cyclically deforming substrates, and facilitates the acquisition of high-fidelity electrophysiological signals with alleviated motion artifacts. The presented strategy is generalizable and could expand the applicability of epidermal ionic skins to more complex service conditions.

Peeling-Stiffening Self-Adhesive Ionogel with Superhigh Interfacial Toughness

Self-adhesive materials that can directly adhere to diverse solid surfaces are indispensable in modern life and technologies. However, it remains a challenge to develop self-adhesive materials with strong adhesion while maintaining its intrinsic softness for efficient tackiness. Here, a peeling-stiffening self-adhesive ionogel that reconciles the seemingly contradictory properties of softness and strong adhesion is reported. The ionogel contains two ionophilic repeating units with distinct associating affinities, which allows to adaptively wet rough surface in the soft dissipating state for adhering, and to dramatically stiffen to the glassy state upon peeling. The corresponding modulus increases by 117 times driven by strain-rate-induced phase separation, which greatly suppresses crack propagation and results in a super high interfacial toughness of 8046 J m-2 . The self-adhesive ionogel is also transparent, self-healable, recyclable, and can be easily removed by simple moisture treatment. This strategy provides a new way to design high-performance self-adhesive materials for intelligent soft devices.

High-sensitivity and ultralow-hysteresis fluorine-rich ionogel strain sensors for multi-environment contact and contactless sensing

Information transduction via soft strain sensors under harsh conditions such as marine, oily liquid, vacuum, and extreme temperatures without excess encapsulation facilitates modern scientific and military exploration. However, most reported soft strain sensors struggle to meet these requirements, especially in complex environments. Herein, a class of fluorine-rich ionogels with tunable ultimate strain, high conductivity, and multi-environment tolerance are designed. Abundant ion-dipole and dipole-dipole interactions lead to excellent miscibility between the hydrophobic ionic liquid and the fluorinated polyacrylate matrix, as well as adhesion to diverse substrates in amphibious environments. The ionogel-based sensors, even in encapsulation-free form, exhibit stable operation with a negligible hysteresis (as low as 0.119%) and high sensitivity (gauge factor of up to 6.54) under amphibious conditions. Multi-environment sensing instances in contact and even contactless forms are also demonstrated. This study opens the door for the artificial syntheses of multi-environment tolerance ionic skins with robust sensing applications in soft electronics and robotics.

Aqueous spinning of robust, self-healable, and crack-resistant hydrogel microfibers enabled by hydrogen bond nanoconfinement

Robust damage-tolerant hydrogel fibers with high strength, crack resistance, and self-healing properties are indispensable for their long-term uses in soft machines and robots as load-bearing and actuating elements. However, current hydrogel fibers with inherent homogeneous structure are generally vulnerable to defects and cracks and thus local mechanical failure readily occurs across fiber normal. Here, inspired by spider spinning, we introduce a facile, energy-efficient aqueous pultrusion spinning process to continuously produce stiff yet extensible hydrogel microfibers at ambient conditions. The resulting microfibers are not only crack-insensitive but also rapidly heal the cracks in 30 s by moisture, owing to their structural nanoconfinement with hydrogen bond clusters embedded in an ionically complexed hygroscopic matrix. Moreover, the nanoconfined structure is highly energy-dissipating, moisture-sensitive but stable in water, leading to excellent damping and supercontraction properties. This work creates opportunities for the sustainable spinning of robust hydrogel-based fibrous materials towards diverse intelligent applications.

Highly Damping and Self-Healable Ionic Elastomer from Dynamic Phase Separation of Sticky Fluorinated Polymers

Shock-induced low-frequency vibration damage is extremely harmful to bionic soft robots and machines that may incur the malfunction of fragile electronic elements. However, current skin-like self-healable ionic elastomers as the artificial sensing and protecting layer still lack the ability to dampen vibrations, due to their almost opposite design for molecular frictions to material's elasticity. Inspired by the two-phase structure of adipose tissue (the natural damping skin layer), here, a highly damping ionic elastomer with energy-dissipating nanophases embedded in an elastic matrix is introduced, which is formed by polymerization-induced dynamic phase separation of sticky fluorinated copolymers in the presence of lithium salts. Such a supramolecular design decouples the elastic and damping functions into two distinct phases, and thus reconciles a few intriguing properties including ionic conductivity, high stretchability, softness, strain-stiffening, elastic recovery, room-temperature self-healability, recyclability, and most importantly, record-high damping capacity at the human motion frequency range (loss factor tan δ > 1 at 0.1-50 Hz). This study opens the door for the artificial syntheses of high-performance damping ionic skins with robust sensing and protective applications in soft electronics and robotics.

Modulating the Coordination Environment of Lithium Bonds for High Performance Polymer Electrolyte Batteries

The new-generation lithium metal batteries require polymer electrolytes with high ionic conductivity and mechanical properties. However, the performance of the polymer electrolytes is severely influenced by the lithium bond formation between the functional groups and lithium ions (Li⁺), which has barely been considered in the past. Herein, a lithium bond enriched polymer gel (PAEV) is elaborately designed by copolymerizing 4-acryloylmorpholine (ACMO) and 1-vinyl-3-ethyl imidazolium bis(trifluoromethylsulfonyl)imide ([VEIM][TFSI]) in 1-ethyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]) with the presence of LiFSI. The lithium bonds formed between LiFSI and carbonyl groups in PACMO can be regulated by the Li⁺ coordination number, and further weakened by the hydrogen bonds with [EMIM][TFSI] and poly[VEIM][TFSI], to effectively render the polymer electrolyte with adjustable ionic conductivity and tunable mechanical property. In addition, with the regulated coordination environment of Li⁺, the LiF and Li₃N layer can be uniformly formed on the Li surface to facilitate Li⁺ nucleation and deposition. As a consequence, the PAEV electrolyte confers the Li/LiFePO₄ (LFP) battery with high capacity of 124 mA h g^-1 at 1 C under 25 °C, and 152 mA h g^-1 under 50 °C. This work can promote the development of high performance polymer electrolyte via lithium bond manipulation.

Small-molecule ionic liquid-based adhesive with strong room-temperature adhesion promoted by electrostatic interaction

Low-molecular-weight adhesives (LMWAs) possess many unique features compared to polymer adhesives. However, fabricating LMWAs with adhesion strengths higher than those of polymeric materials is a significant challenge, mainly because of the relatively weak and unbalanced cohesion and interfacial adhesion. Herein, an ionic liquid (IL)-based adhesive with high adhesion strength is demonstrated by introducing an IL moiety into a Y-shaped molecule replete with hydrogen bonding (H-bonding) interactions. The IL moieties not only destroyed the rigid and ordered H-bonding networks, releasing more free groups to form hydrogen bonds (H-bonds) at the substrate/adhesive interface, but also provided electrostatic interactions that improved the cohesion energy. The synthesized IL-based adhesive, Tri-HT, could directly form thin coatings on various substrates, with high adhesion strengths of up to 12.20 MPa. Advanced adhesives with electrical conductivity, self-healing behavior, and electrically-controlled adhesion could also be fabricated by combining Tri-HT with carbon nanotubes.

Skin-like mechanoresponsive self-healing ionic elastomer from supramolecular zwitterionic network

Stretchable ionic skins are intriguing in mimicking the versatile sensations of natural skins. However, for their applications in advanced electronics, good elastic recovery, self-healing, and more importantly, skin-like nonlinear mechanoresponse (strain-stiffening) are essential but can be rarely met in one material. Here we demonstrate a robust proton-conductive ionic skin design via introducing an entropy-driven supramolecular zwitterionic reorganizable network to the hydrogen-bonded polycarboxylic acid network. The design allows two dynamic networks with distinct interacting strength to sequentially debond with stretch, and the conflict among elasticity, self-healing, and strain-stiffening can be thus defeated. The representative polyacrylic acid/betaine elastomer exhibits high stretchability (1600% elongation), immense strain-stiffening (24-fold modulus enhancement), ~100% self-healing, excellent elasticity (97.9 ± 1.1% recovery ratio, <14% hysteresis), high transparency (99.7 ± 0.1%), moisture-preserving, anti-freezing (elastic at -40 °C), water reprocessibility, as well as easy-to-peel adhesion. The combined advantages make the present ionic elastomer very promising in wearable iontronic sensors for human-machine interfacing.

Distinct Cation-Anion Interactions in the UCST and LCST Behavior of Polyelectrolyte Complex Aqueous Solutions

Polyelectrolyte complexes (PECs) are recently observed to possess diversified thermoresponsive phase transition behaviors in aqueous solutions. Herein, by adjusting the initial polymer concentrations (C_pi) of poly(styrenesulfonate) (PSS)/poly(diallyldimethylammonium) (PDADMA) PEC in the same saline solution, in addition to previously reported lower critical solution temperature (LCST), we experimentally observed the upper critical solution temperature (UCST)-type phase transition behavior of PSS/PDADMA PECs at a lower polymer concentration. As elucidated by temperature-dependent Raman spectroscopy and two-dimensional correlation analysis, at temperatures lower than UCST, more hydrophobic polyelectrolyte chains lead to a high proportion of contact ion pairs (CIPs), contributing to UCST-type solid-liquid phase transition; however, at higher concentrations of PEC, the less hydrophobic polyelectrolyte chains correspond to a higher proportion of solvent-separated ion pairs (SIPs), which enables the occurrence of LCST-type liquid-liquid phase transition. With the spectroscopic indicator of CIPs/SIPs peak ratio and monitoring the hydration state of polymer chains, the complex interplays of PSS/PDADMA PECs are hereby interpreted at the molecular level, which lays the mechanistic foundation for designing other thermoresponsive PEC assemblies.

Microdynamic changes of moisture-induced crystallization of amorphous calcium carbonate revealed via in situ FTIR spectroscopy

A microdynamic mechanism of moisture-induced ACC crystallization involving three consecutive conversion stages is elucidated via in situ FTIR spectroscopy and two-dimensional correlation analysis.

Temperature dependent specific ion effects in mixed salt environments on a thermoresponsive poly(oligoethylene glycol methacrylate) brush

The temperature induced swelling/collapse transition of poly(oligoethylene glycol methacrylate) (POEGMA) brushes has been investigated in electrolyte solutions comprised of multiple anions.

Zwitterionic Skins with a Wide Scope of Customizable Functionalities

With growing interest in the fields of wearable devices, it is crucial yet rather challenging to develop skinlike soft conductive materials with customizable functionalities and human tissue-compatible mechanical properties. Previously reported electronic skins struggle to meet the demands for transparence, mechanical adaptability, and stable conductivity during deformation. The recent rise of ionic skins with inorganic salts or ionic liquids doping provides the intrinsic stretchability, however, dilemmas remain for their limited functionalities such as a monotonous appearance and a narrow scope of mechanical and sensory properties. Herein, we design a type of zwitterionic hydrogels from the perspective of molecular interactions, which successfully combines ultrastretchability (>10000% strain), high strength (∼300 kPa), self-healability (at room temperature within 12 h), 3D printability, distinct stimuli-responsibility, biocompatibility, and antibacterial activity. The wide spectrum of such excellent properties has been rarely reported before and along with the ability to fabricate bioinspired intelligent skins recreating multiple sensations and mechanical properties of human skin, covering a broad range of sensitivity, and displaying tunable visual effect. We believe this work will inspire the programming of stimuli-responsive skinlike materials and contribute to the smart devices for information transformation between natural and artificial interfaces.

Dual-responsive deformation of a crosslinked liquid crystal polymer film with complex molecular alignment

Crosslinked liquid crystal polymers (CLCPs) containing azobenzene mesogens have been developed as stimuli-responsive materials, which can undergo photodeformation and thus convert light energy into mechanical force. The deformation behavior of CLCPs is strongly influenced by the alignment of the mesogens; however, a precise control of the alignment domain at micro-scale is still a challenge. Here we report complex molecular alignment in the CLCP film by using photoalignment technology. First, azo dye SD1 is aligned in-plane by UV light with a discrete alternating striped director profile. The SD1 molecules in adjacent strips are aligned orthogonal, and the widths of the strips are controlled in several hundred micrometers by a photomask with grating patterns. Then the liquid crystal molecules in the CLCP film are aligned by SD1 through the anchoring effect on one side (SD1 side), and aligned perpendicular by the polyimide (PI) alignment layer on the other side (PI side). With these alignments, two kinds of splayed structures are formed through the depth of the film. When irradiated by UV light, the film bends toward the SD1 side with the bending direction along the diagonal of the film, determined by the resultant direction of molecular alignment on the SD1 side. When irradiated by blue light and heat, the bending direction is along the edge of the film. This dual-responsive deformable film with complex alignment is anticipated to be used in shape-changing biomedical devices, multiple controllable switches, and microactuators.