Synthesis, characterization, and catalytic ethylene oligomerization of pyridine-imine palladium complexes

Late Transition Metal Catalysts with Chelating Amines for Olefin Polymerization

Polyolefins are the most consumed polymeric materials extensively used in our daily life and are usually generated by coordination polymerization in the polyolefin industry. Olefin polymerization catalysts containing transition metal–organic compound combinations are undoubtedly crucial for the development of the polyolefin industry. The nitrogen donor atom has attracted considerable interest and is widely used in combination with the transition metal for the fine-tuning of the chemical environment around the metal center. In addition to widely reported olefin polymerization catalysts with imine and amide donors (sp2 hybrid N), late transition metal catalysts with chelating amine donors (sp3 hybrid N) for olefin polymerization have never been reviewed. In this review paper, we focus on late transition metal (Ni, Pd, Fe, and Co) catalysts with chelating amines for olefin polymerization. A variety of late transition metal catalysts bearing different neutral amine donors are surveyed for olefin polymerization, including amine–imine, amine–pyridine, α-diamine, and [N, N, N] tridentate ligands with amine donors. The relationship between catalyst structure and catalytic performance is also encompassed. This review aims to promote the design of late transition metal catalysts with unique chelating amine donors for the development of high-performance polyolefin materials.

Ethylene (co) oligomerization using iminopyridyl Ni(II) and Pd(II) complexes bearing benzocycloalkyl moieties to access hyperbranched ethylene oligomers and ethylene-MA co-oligomers

Hyperbranched ethylene oligomers and polar functionalized co-oligomers synthesized via ethylene chain walking (co) oligomerization is a very attractive strategy. In this study, a series of dibenzhydryl iminopyridyl ligands with benzocycloalkyl and naphthyl moieties and the corresponding Ni(II) and Pd(II) complexes were synthesized and characterized. The Ni(II) complexes were highly effective in ethylene oligomerization and ethylene oligomers with hyperbranched microstructures were generated from this system. The corresponding Pd(II) complexes showed moderate oligomerization activities in ethylene oligomerization and hyperbranched ethylene oligomers were also yielded from the system. More significantly, the Pd(II) complexes can also effectively promote the co-oligomerization of ethylene with methyl acrylate (MA) to obtain hyperbranched polar functionalized ethylene-MA co-oligomers. The reaction temperature, catalyst ligand structure and metal type all have significant effects on ethylene (co) oligomerization with respect to catalytic activity, molecular weight and topology of the oligomers.

Direct Synthesis of Chain-End Toluene Functionalized Hyperbranched Ethylene Oligomers

Chain-end functionalized polymers play an important role in the field of building complex macromolecular structures. In this study, we have synthesized and characterized four dibenzhydryl iminopyridine Ni(II) complexes bearing remote flexible substituents (Et and n-Bu) to provide hyperbranched ethylene oligomers in ethylene oligomerization with moderate to good activities. Most notably, toluene-end-functionalized hyperbranched ethylene oligomers were obtained under elevated temperature conditions and validated by NMR. The tandem catalysis of ethylene oligomerization and the subsequent Friedel-Crafts addition of the resulting unsaturated products to toluene molecules was proposed as the cause of the observed phenomenon.

Synthesis of High-Molecular-Weight Branched Polyethylene Using a Hybrid "Sandwich" Pyridine-Imine Ni(II) Catalyst

Most pyridine-imine Ni(II) and Pd(II) catalysts tend to yield low-molecular-weight polyethylene and ethylene-based copolymers in olefin insertion polymerization, as the unilateral axial steric structure of such complexes often cannot provide effective shielding of the metal center. In this study, we synthesized a series of hybrid "semi-sandwich" and "sandwich" type pyridine-imine Ni(II) complexes by incorporating diarylmethyl or dibenzosuberyl groups onto 8-aryl-naphthyl motif. The as-prepared Ni(II) complexes afforded highly branched polyethylene with high molecular weights (level of 105 g/mol), and moderate activities (level of 105 g/(molh)) in ethylene polymerization. Most interestingly, compared to "semi-sandwich" Ni(II) complexes bearing (2-diarylmethyl-8-aryl)naphthyl units, the "full-sandwich" counterpart containing (2-dibenzosuberyl-8-aryl)naphthyl motif was able to produce higher-molecular-weight polyethylene with higher branching density. In addition, the effect of remote non-conjugated electronic substituents in diarylmethyl groups of the Ni(II) system was also observed in ethylene polymerization.

Cobalt-Catalyzed Four-Component Carbonylation of Methylarenes with Ethylene and Alcohols

Direct conversion of raw materials to fine chemicals is greatly economically influential. We developed a non-expensive cobalt-catalyzed multicomponent carbonylative reaction for the synthesis of γ-aryl carboxylic acid esters from readily available methylarene, ethylene, and CO, which are widely found in multiple FDA-approved drugs.

A rigid-flexible double-layer steric strategy for ethylene (co)oligomerization with pyridine-imine Ni(ii) and Pd(ii) complexes

A rigid-flexible double-layer steric strategy enhances the molecular weight of the resulting ethylene oligomers and promotes the co-oligomerization of ethylene and methyl acrylate.

Facile Synthesis of Hyperbranched Ethylene Oligomers and Ethylene/Methyl Acrylate Co-oligomers with Different Microscopic Chain Architectures

Low-molecular-weight (MW) ethylene oligomers with hyperbranched microstructures are often difficult to be synthesized by traditional catalytic processes. In this study, a series of N-terphenyl iminopyridyl ligands and the corresponding Pd(II) and Ni(II) complexes bearing remote conjugated substituents with different electronic effects (H, Me, F, Cl, and tBu) were synthesized in a simple and efficient way. These Pd(II) and Ni(II) complexes were highly effective in the ethylene oligomerization and co-oligomerization with methyl acrylate (MA). Low-MW ethylene oligomers with hyperbranched microstructures were generated using the iminopyridyl Pd(II) and Ni(II) complexes in ethylene oligomerization. More importantly, polar functionalized ethylene-MA co-oligomers with low MWs and varying incorporation ratios were generated via ethylene and MA co-oligomerization using the Pd(II) complexes. Most notably, these ethylene oligomers obtained by different metal species showed a significant difference in microscopic chain architectures. The remote conjugated electron effect showed little effect on the polymerization parameters of the iminopyridyl system, which is very different from those of the salicylaldiminato system.

Combining hydrogen bonding interactions with steric and electronic modifications for thermally robust α-diimine palladium catalysts toward ethylene (co)polymerization

Thermally robust α-diimine palladium catalysts are highly active for ethylene (co)polymerization at high temperatures by steric and electronic modifications in combination with hydrogen bonding interactions.

Sterically and Electronically Modified Aryliminopyridyl-Nickel Bromide Precatalysts for an Access to Branched Polyethylene with Vinyl/Vinylene End Groups

A series of 2-((arylimino)ethyl)pyridine derivatives (L1-L5), each containing N-2,4-bis(dibenzocycloheptyl) groups with variations in the steric/electronic properties of the ortho-substituent in the aryl ring, and the corresponding nickel bromide precatalysts [2-N{2,4-(C₁₅H₁₃)-6-R-C₆H₂}C₇H₇N]NiBr₂ (R = Me (Ni1), Et (Ni2), ^i-Pr (Ni3), Cl (Ni4), or F (Ni5)), have been prepared in high yield. All the precatalysts are air-stable and characterized by Fourier transform infrared spectroscopy and elemental analysis. The molecular structures of Ni2 and Ni5 were proved through single-crystal X-ray diffraction analysis. The steric/electronic impact of the catalysts on ethylene polymerization and the resulting polymer properties were studied. Upon activation with either MAO or EASC, all the complexes displayed higher activities (up to 7.93 × 10⁶ g of PE (mol of Ni)^-1 h^-1 with MAO) in ethylene polymerization and produced moderate to highly branched unsaturated polyethylene with a molecular weight of up to 16.55 kg/mol with narrow dispersities (1.6-2.4). Significantly, the generated polyethylenes are branched and unsaturated with a major class of internal double bond (-CH=CH-) as compared to the terminal double bond (-CH=CH₂) (vinylene/vinyl = 9.8:1 to 1.8:1). Notably, their catalytic activities, types of unsaturation, and branches are highly affected by the nature of the ortho-substituent and reaction temperature. Moreover, the precatalysts Ni4 and Ni5 (with N-ortho = Cl and F) exhibited lower catalytic activities, produced low-molecular-weight polyethylene with a high melt temperature and the least number of branches with an increased level of terminal double bonds.