Dynamic Oxime-Urethane Bonds, a Versatile Unit of High Performance Self-healing Polymers for Diverse Applications

Versatile ionic liquid gels formed by dynamic covalent bonding and microphase separated structures

It is challenging for ionic liquid gels to achieve the combination of rapid self-healing with high toughness. Here, ionic liquid gels (DI-PR) were prepared from readily available materials. A dynamic covalently bonded oxime-carbamate was prepared from polycaprolactone diol, isophorone diisocyanate and dimethylethyleneglyoxime, followed by addition of the "rigid-flexible" cross-linking agent rutin to chemically cross-link the polymer chains and afford the ionic liquid gels, DI-PR. The tensile strength, elongation at break and toughness of the DI-PR gels were as high as 16.5 MPa, 1132.6%, and 52.6 MJ m-3, respectively. The toughness is similar to that of natural silkworm silk (70 MJ m-3) and wool (60 MJ m-3). After stretching, the DI-PR can rebound within 1 s, their room temperature self-healing rate is as high as 92%, they remain functional over the temperature range -50 °C to 140 °C and the interface with a steel plate has an adhesion toughness of >2000 J m-2. These properties mean that the DI-PR gels are particularly suitable for use as anticorrosion coatings for submarine and underground gas and oil pipelines. The use of rutin, which combines rigid quercetin-based structural units with flexible glycoside-based structural units, as a cross-linking agent, provides a new method for improving the toughness of soft materials through its synergistic interaction with hard and soft chain fragments of polyurethanes.

Bone-inspired stress-gaining elastomer enabled by dynamic molecular locking

The limited capacity of typical materials to resist stress loading, which affects their mechanical performance, is one of the most formidable challenges in materials science. Here, we propose a bone-inspired stress-gaining concept of converting typically destructive stress into a favorable factor to substantially enhance the mechanical properties of elastomers. The concept was realized by a molecular design of dynamic poly(oxime-urethanes) network with mesophase domains. During external loading, the mesophase domains in the condensed state were aligned into more ordered domains, and the dynamic oxime-urethane bonds served as the dynamic molecular locks disassociating and reorganizing to facilitate and fix the mesophase domains. Consequently, the tensile modulus and strength were enhanced by 1744 and 49.3 times after four cycles of mechanical training, respectively. This study creates a molecular concept with stress-gaining properties induced by repeated mechanical stress loading and will inspire a series of innovative materials for diverse applications.

Multifunctional aqueous polyurethanes with high strength and self-healing efficiency based on silver nanowires for flexible strain sensors

Advanced sensor technology is widely applied in human motion monitoring and research. However, it often encounters problems such as scratches, fractures, and aging, which affect its lifespan and reliability. To address these challenges, we draw inspiration from the inherent self-healing properties of organic biological entities in nature to endow our sensors with self-healing capability. In this work, we constructed a reversible multi-hydrogen-bonded physical crosslinking network and introduced aromatic disulfide bonds into the polyurethane backbone. This design not only achieves a very high mechanical strength of the material, but also efficient self-healing properties. At 80 °C, the tensile strength of the WPU-U2D1 material reached 28.88 MPa, with a fracture elongation of 748.64%, and a self-healing efficiency as high as 99.24%. Based on this material, we successfully prepared a flexible conductive composite film (WPU@AgNW) and applied it to flexible strain sensors. The sensor demonstrated excellent sensitivity and reliability in human motion monitoring (electrical conductivity of 2.66 S cm-1), which provides a new idea for realising the breakthrough of high-performance flexible sensors. These outstanding properties makes it have great potential for application in flexible wearable devices, human-computer interaction, bionic electronic devices and other fields.

Thermally Responsive Selenide-containing Materials Based on Transalkylation of Selenonium Salts

Covalent adaptable networks (CANs) possess unique properties as a result of their internal dynamic bonds, such as self-healing and reprocessing abilities. In this study, we report a thermally responsive C-Se dynamic covalent chemistry (DCC) that relies on the transalkylation exchange between selenonium salts and selenides, which undergo a fast transalkylation reaction in the absence of any catalyst. Additionally, we demonstrate the presence of a dissociative mechanism in the absence of selenide groups. After incorporation of this DCC into selenide-containing polymer materials, it was observed that the cross-linked networks display varying dynamic exchange rates when using different alkylation reagents, suggesting that the reprocessing capacity of selenide-containing materials can be regulated. Also, by incorporating selenonium salts into polymer materials, we observed that the materials exhibited good healing ability at elevated temperatures as well as excellent solvent resistance at ambient temperature. This novel dynamic covalent chemistry thus provides a straightforward method for the healing and reprocessing of selenide-containing materials.

Hybrid Cross-Linking to Construct Functional Elastomers

ConspectusElastomers have been extensively used in diverse industrial sectors such as footwear, seals, tires, and cable jacketing and have attracted more and more attention in emerging fields such as regenerative medicine, soft robotics, and stretchable electronics. Global consumption of natural and synthetic elastomers amounted to nearly 27 million metric tons in 2020. In addition, to further enhance the common properties of elastomers, it is highly desired to endow elastomers with functionalities such as reprocessability, biomimetic mechanical properties, self-healing ability, bioactivity, and electrical conductivity, which will significantly broaden their applications. The covalent or noncovalent cross-linked structure is the essential factor for the elasticity of elastomers. Traditional elastomers usually comprise a single type of cross-linked molecular network, for which it is difficult to modulate the properties and introduce functionalities. Inspired by the simultaneous existence of multiple cross-linked structures in proteins, researchers have employed a hybrid cross-linking strategy to construct elastomers. Various noncovalent interactions (e.g., hydrogen bonds, metal-ligand coordination, ionic interactions, and chain folding) and dynamic covalent bonds (e.g., disulfide bonds, oxime-urethane bonds, and urea bonds) have been integrated in elastomers. Accordingly, the properties and functionalities of elastomers can be tuned by regulating the types, ratios, and distributions of cross-links. The hybrid cross-linking strategy provides a versatile and effective way to construct diverse functional elastomers for broad applications in various important fields.In this Account, we present our recent progress on functional elastomers constructed by a hybrid cross-linking strategy, including their design, preparation, properties, and diverse applications. First, we provide a brief introduction of the basic concept of functional elastomers and outline general strategies and mechanics for functional elastomers constructed by hybrid cross-linking. Then, we classify hybrid cross-linked elastomers by their design strategies, including multiple cross-linking, topological design, chemical coupling, and multiple networks. The relationships between the functionalities and hybrid cross-linked structures are summarized. At the same time, we also introduce diverse applications of these hybrid cross-linked elastomers in biomedicine, flexible electronics, soft robotics, 3D printing, and so on. Finally, we discuss our perspective on open challenges and future development trends of this rapidly evolving field. This Account highlighting the diverse hybrid cross-linked elastomers not only provides insights into strategies for elastomer functionalization but also provides new ideas for material design and inspires a variety of new applications.

Progress and Challenges Toward Effective Flexible Perovskite Solar Cells

The demand for building-integrated photovoltaics and portable energy systems based on flexible photovoltaic technology such as perovskite embedded with exceptional flexibility and a superior power-to-mass ratio is enormous. The photoactive layer, i.e., the perovskite thin film, as a critical component of flexible perovskite solar cells (F-PSCs), still faces long-term stability issues when deformation occurs due to encountering temperature changes that also affect intrinsic rigidity. This literature investigation summarizes the main factors responsible for the rapid destruction of F-PSCs. We focus on long-term mechanical stability of F-PSCs together with the recent research protocols for improving this performance. Furthermore, we specify the progress in F-PSCs concerning precise design strategies of the functional layer to enhance the flexural endurance of perovskite films, such as internal stress engineering, grain boundary modification, self-healing strategy, and crystallization regulation. The existing challenges of oxygen-moisture stability and advanced encapsulation technologies of F-PSCs are also discussed. As concluding remarks, we propose our viewpoints on the large-scale commercial application of F-PSCs.

Adaptable covalently cross-linked fibers

Fibers, with over 100 million tons produced each year, have been widely used in various areas. Recent efforts have focused on improving mechanical properties and chemical resistance of fibers via covalent cross-linking. However, the covalently cross-linked polymers are usually insoluble and infusible, and thus fiber fabrication is difficult. Those reported require complex multiple-step preparation processes. Herein, we present a facile and effective strategy to prepare adaptable covalently cross-linked fibers by direct melt spinning of covalent adaptable networks (CANs). At processing temperature, dynamic covalent bonds are reversibly dissociated/associated and the CANs are temporarily disconnected to enable melt spinning; at the service temperature, the dynamic covalent bonds are frozen, and the CANs exhibit favorable structural stability. We demonstrate the efficiency of this strategy via dynamic oxime-urethane based CANs, and successfully prepare adaptable covalently cross-linked fibers with robust mechanical properties (maximum elongation of 2639%, tensile strength of 87.68 MPa, almost complete recovery from an elongation of 800%) and solvent resistance. Application of this technology is demonstrated by an organic solvent resistant and stretchable conductive fiber.

Dual-Crosslinked Degradable Elastomeric Networks With Self-Healing Properties: Bringing Multi(catechol) Star-Block Copolymers into Play

In the biomedical field, degradable chemically crosslinked elastomers are interesting materials for tissue engineering applications, since they present rubber-like mechanical properties matching those of soft tissues and are able to preserve their three-dimensional (3D) structure over degradation. Their use in biomedical applications requires surgical handling and implantation that can be a source of accidental damages responsible for the loss of properties. Therefore, their inability to be healed after damage or breaking can be a major drawback. In this work, biodegradable dual-crosslinked networks that exhibit fast and efficient self-healing properties at 37 °C are designed. Self-healable dual-crosslinked (chemically and physically) elastomeric networks are prepared by two methods. The first approach is based on the mix of hydrophobic poly(ethylene glycol)-poly(lactic acid) (PEG-PLA) star-shaped copolymers functionalized with either catechol or methacrylate moieties. In the second approach, hydrophobic bifunctional PEG-PLA star-shaped copolymers with both catechol and methacrylate on their structure are used. In the two systems, the supramolecular network is responsible for the self-healing properties, thanks to the dynamic dissociation/reassociation of the numerous hydrogen bonds between the catechol groups, whereas the covalent network ensures mechanical properties similar to pure methacrylate networks. The self-healable materials display mechanical properties that are compatible with soft tissues and exhibit linear degradation because of the chemical cross-links. The performances of networks from mixed copolymers versus bifunctional copolymers are compared and demonstrate the superiority of the latter. The biocompatibility of the materials is also demonstrated, confirming the potential of these degradable and self-healable elastomeric networks to be used for the design of temporary medical devices.

Advances and Challenges of Self-Healing Elastomers: A Mini Review

In the last few decades, self-healing polymeric materials have been widely investigated because they can heal the damages spontaneously and thereby prolong their service lifetime. Many ingenious synthetic procedures have been developed for fabricating self-healing polymers with high performance. This mini review provides an impressive summary of the self-healing polymers with fast self-healing speed, which exhibits an irreplaceable role in many intriguing applications, such as flexible electronics. After a brief introduction to the development of self-healing polymers, we divide the development of self-healing polymers into five stages through the perspective of their research priorities at different periods. Subsequently, we elaborated the underlying healing mechanism of polymers, including the self-healing origins, the influencing factors, and direct evidence of healing at nanoscopic level. Following this, recent advance in realizing the fast self-healing speed of polymers through physical and chemical approaches is extensively overviewed. In particular, the methodology for balancing the mechanical strength and healing ability in fast self-healing elastomers is summarized. We hope that it could afford useful information for research people in promoting the further technical development of new strategies and technologies to prepare the high performance self-healing elastomers for advanced applications.

Synthesis, optical and dielectric properties of polyacryloyloxy imino fluorophenyl acetamide and polyacryloyloxy imino fluorophenyl acetamide-co-polystyrene sulfonate

Our scope is synthesis a new poly fluorobenzamide oxime ester and study its structural, optical, and dielectric properties. Consequently, ((E)-2-((acryloyloxy)imino)-N-(4-fluorophenyl) acetamide) (AIFPA) was as-synthesized via a condensation reaction of (E)-N-(4-fluorophenyl)-2-(hydroxyimino) acetamide with acrylic acid to polymerize it via free radical polymerization (PAIFPA). over and above, the synthesized PAIFPA was inserted in more polymerization action with polystyrene sulfonate through the grafting process (PAIFPA-co-PSS). The chemical structures and morphology of AIFPA, PAIFPA, and PAIFPA-co-PSS were characterized by 1H NMR, FTIR, and XRD. The crystallinity index of PAIFPA, and PAIFPA-co-PSS was studied, affording that PAIFPA-co-PSS has the highest crystallinity. Moreover, The optical bandgap that obtained from absorbance analysis was encountered to be in the range of 2.6 eV to 3.5 eV. Ultimately, the dielectric properties of PAIFPA, and PAIFPA-co-PSS showed that electric conductivity values ranged from 6.12 × 10–8 to 7.11 × 10–7 S.cm−1, and 5.48 × 10–10 to 7.75 × 10–8 S.cm−1, respectively. It has a great deal of interest of PAIFPA-co-PSS which has wide band gap energy as short-wavelength light absorbers to be used in tandem polymer solar cells.

Rapid Stress Relaxation, Multistimuli-Responsive Elastomer Based on Dual-Dynamic Covalent Bonds and Aniline Trimer

Covalent adaptable networks (CANs) are an emerging kind of smart materials in which cross-links are reversible upon some stimuli and then provide malleability and a stimuli-responsive ability to the materials. There is a trend to endow CANs with multistimuli-responsive capabilities and rapid stress relaxation to pursue more advanced applications. To integrate these two features into one material, here, dual-dynamic covalent bonds (imines and boronic esters) and aniline trimer (ACAT) were incorporated into the styrene butadiene elastomer as dynamic cross-links. The obtained CANs were demonstrated with rapid stress relaxation and a relatively low activation energy of 36 ± 1 kJ mol^-1, resulting from the synergistic effect of dual-dynamic covalent bonds to rearrange the network at a faster rate than for either imines or boronic esters. Because of the dynamic nature of imines or boronic esters, the elastomer can be recycled upon heat. Moreover, the appearance and configuration of the elastomer could also be manipulated by pH and light because of the inclusion of ACAT. All in all, the coupled multistimuli-responsive behavior and rapid stress relaxation in one single elastomer would potentially be applicable for sensors and actuators with good recyclability.

Dynamic covalent polymers enabled by reversible isocyanate chemistry

Reversible isocyanate chemistry containing urethane, thiourethane, and urea bonds is valuable for designing dynamic covalent polymers to achieve promising applications in recycling, self-healing, shape morphing, 3D printing, and composites.