Simulating single cell experiments in mechanical testing of adipocytes

Mechanobiology of Adipocytes

The growing obesity epidemic necessitates increased research on adipocyte and adipose tissue function and disease mechanisms that progress obesity. Historically, adipocytes were viewed simply as storage for excess energy. However, recent studies have demonstrated that adipocytes play a critical role in whole-body homeostasis, are involved in cell communication, experience forces in vivo, and respond to mechanical stimuli. Changes to the adipocyte mechanical microenvironment can affect function and, in some cases, contribute to disease. The aim of this review is to summarize the current literature on the mechanobiology of adipocytes. We reviewed over 100 papers on how mechanical stress is sensed by the adipocyte, the effects on cell behavior, and the use of cell culture scaffolds, particularly those with tunable stiffness, to study adipocyte behavior, adipose cell and tissue mechanical properties, and computational models. From our review, we conclude that adipocytes are responsive to mechanical stimuli, cell function and adipogenesis can be dictated by the mechanical environment, the measurement of mechanical properties is highly dependent on testing methods, and current modeling practices use many different approaches to recapitulate the complex behavior of adipocytes and adipose tissue. This review is intended to aid future studies by summarizing the current literature on adipocyte mechanobiology.

Aortic stiffness is lower when perivascular adipose tissue (PVAT) is included: a novel ex vivo mechanics study

Perivascular adipose tissue (PVAT) is increasingly recognized as an essential layer of the functional vasculature, being responsible for producing vasoactive substances and assisting arterial stress relaxation. Here we test the hypothesis that PVAT reduces aortic stiffness. Our model was the thoracic aorta of the male Sprague Dawley rat. Uniaxial mechanical tests for three groups of tissue were performed: aorta +PVAT (+PVAT), aorta - PVAT (-PVAT), and isolated PVAT (PVAT only). The output of the mechanical test is reported in the form of a Cauchy stress-stretch curve. This work presents a novel, physiologically relevant approach to measure mechanical stiffness ex vivo in isolated PVAT. Low-stress stiffness (), high-stress stiffness (), and the stress corresponding to a stretch of 1.2 () were measured as metrics of distensibility. The low-stress stiffness was largest in the -PVAT samples and smallest in PVAT only samples. Both the high-stress stiffness and the stress at 1.2 stretch were significantly higher in -PVAT samples when compared to +PVAT samples. Taken together these results suggest that -PVAT samples are stiffer (less distensible) both at low stress (not significant) as well as at high stress (significant) when compared to +PVAT samples. These conclusions are supported by the results of the continuum mechanics material model we also used to interpret the same experimental data. Thus, tissue stiffness is significantly lower when considering PVAT as part of the aortic wall. As such, PVAT should be considered as a target for improving vascular function in diseases with elevated aortic stiffness, including hypertension.

The mechanobiology theory of the development of medical device-related pressure ulcers revealed through a cell-scale computational modeling framework

Pressure ulcers are localized sites of tissue damage which form due to the continuous exposure of skin and underlying soft tissues to sustained mechanical loading, by bodyweight forces or because a body site is in prolonged contact with an interfacing object. The latter is the common cause for the specific sub-class of pressure ulcers termed ‘medical device-related pressure ulcers’, where the injury is known to have been caused by a medical device applied for a diagnostic or therapeutic purpose. Etiological research has established three key contributors to pressure ulcer formation, namely direct cell and tissue deformation, inflammatory edema and ischemic damage which are typically activated sequentially to fuel the injury spiral. Here, we visualize and analyze the above etiological mechanism using a new cell-scale modeling framework. Specifically, we consider here the deformation-inflicted and inflammatory contributors to the damage progression in a medical device-related pressure ulcer scenario, forming under a continuous positive airway pressure ventilation mask at the microarchitecture of the nasal bridge. We demonstrate the detrimental effects of exposure to high-level continuous external strains, which causes deformation-inflicted cell damage almost immediately. This in turn induces localized edema, which exacerbates the cell-scale mechanical loading state and thereby progresses cell damage further in a nonlinear, escalating pattern. The cell-scale quantitative description of the damage cascade provided here is important not only from a basic science perspective, but also for creating awareness among clinicians as well as industry and regulators with regards to the need for improving the design of skin-contacting medical devices.

A novel system for dynamic stretching of cell cultures reveals the mechanobiology for delivering better negative pressure wound therapy

Serious wounds, both chronic and acute (e.g., surgical), are among the most common, expensive and difficult-to-treat health problems. Negative pressure wound therapy (NPWT) is considered a mainstream procedure for treating both wound types. Soft tissue deformation stimuli are the crux of NPWT, enhancing cell proliferation and migration from peri-wound tissues which contributes to healing. We developed a dynamic stretching device (DSD) contained in a miniature incubator for applying controlled deformations to fibroblast wound assays. Prior to the stretching experiments, fibroblasts were seeded in 6-well culture plates with elastic substrata and let to reach confluency. Squashing damage was then induced at the culture centers, and the DSD was activated to deliver stretching regimes that represented common clinical NPWT protocols at two peak strain levels, 0.5% and 3%. Analyses of the normalized maximal migration rate (MMR) data for the collective cell movement revealed that for the 3% strain level, the normalized MMR of cultures subjected to a 0.1 Hz stretch frequency regime was ~ 1.4 times and statistically significantly greater (p < 0.05) than that of the cultures subjected to no-stretch (control) or to static stretch (2nd control). Correspondingly, analysis of the time to gap closure data indicated that the closure time of the wound assays subjected to the 0.1 Hz regime was ~ 30% shorter than that of the cultures subjected to the control regimes (p < 0.05). Other simulated NPWT protocols did not emerge as superior to the controls. The present method and system are a powerful platform for further revealing the mechanobiology of NPWT and for improving this technology.

Biomechanical stimulation effects on the metabolism of adipocyte

Adipose tissue plays a leading role in obesity, which, in turn, can lead to Type 2 diabetes. Adipocytes (AD) respond to the biomechanical stimulation experienced in fat tissue under static stretch during prolonged sitting or lying. To investigate the effect of such chronic stimulation on adipocyte cell metabolism, we used an in vitro system to mimic the static stretch conditions. Under in vitro culture stretching, cells were analyzed at the single-cell level and we measured an increase in the projected area of the AD and higher content of lipid droplets. A decrease in the projected area of these cells' nucleus is associated with peroxisome proliferator-activated receptor-gamma expression and heterochromatin. This is the first study to reveal proteins that were altered under static stretch following a mass spectrometry analysis and main pathways that affect cell fate and metabolism. Bioinformatics analysis of the proteins indicated an increase in mitochondrial activity and associated pathways under static stretch stimulation. Quantification of the mitochondrial activity by 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) assay and the ATPase related proteins specifically measured ATP5B indicated an increase in adipogenesis which points to a higher rate of cell metabolism under static stretch. In summary, our results elaborate on the metabolism of AD exposed to biomechanical stimulation, that is, associated with altered cellular protein profile and thereby influenced cell fate. The static stretch stimulation accelerated adipocyte differentiation through increased mitochondrial activity. Hence, in this study, we introduce a new perspective in understanding the molecular regulation of mechano-transduction in adipogenesis.

Finite element analysis reveals an important role for cell morphology in response to mechanical compression

Mechanical loading naturally controls cell phenotype, development, motility and various other biological functions; however, prolonged or substantial loading can cause cell damage and eventual death. Loading-induced mechanobiological and mechanostructural responses of different cell types affect their morphology and the internal architecture and the mechanics of the cellular components. Using single, mesenchymal stem cells, we have developed a cell-specific three-dimensional finite-element model; cell models were developed from phase-contrast microscopy images. This allowed us to evaluate the mechanostructural response of the naturally occurring variety of cell morphologies to increase sustained compressive loading. We focus on the morphology of the cytoplasm and the nucleus, as the main mechanically responsive elements, and evaluate formation of tensional strains and area changes in cells undergoing increasing uniaxial compressions. Here, we study mesenchymal stem cells as a model, due to their important role in tissue engineering and regenerative medicine; the method and findings are, however, applicable to any cell type. We observe variability in the cell responses to compression, which correlate directly with the morphology of the cells. Specifically, in cells with or without elongated protrusions (i.e., lamellipodia) tensional strains were, respectively, distributed mostly in the thin extensions or concentrated around the stiff nucleus. Thus, through cell-specific computational modeling of mechanical loading we have identified an underlying cause for stiffening (by actin recruitment) along the length of lamellipodia as well as a role for cell morphology in inducing cell-to-cell variability in mechanostructural response to loading.

Adipocytes Migration is Altered Through Differentiation

Adipogenesis is a developmental process in which an elongated preadipocyte differentiates to a round adipocyte along with the accumulation of lipid droplets. In the present study, we focus on the study of cell motility at the single-cell level, toward expanding our knowledge regarding the cytoskeleton alteration during differentiation; since-cell motility is mediated by cytoskeletal components. We used the holographic-microscopy live imaging technique to evaluate, for the first time in the literature, differences between the motility of nondifferentiated preadipocytes and differentiated mature adipocytes in living cell cultures over time. We revealed that mean motility speed of preadipocytes was significantly higher (fourfold) than that of adipocytes, and that the movement of preadipocytes is less consistent and more extensive. Furthermore, we found that preadipocytes tend to migrate to farther distances, while mature adipocytes remain relatively close to their original location. The results presented here are in agreement with the fact that the cytoskeleton of adipocytes is altered during differentiation and similarly, points to the fact that the cell-sensing mechanisms are changing during differentiation. Our research paves the way to gain better insights of the differentiation process and its implications on larger scale systems in the context of obesity.

Noninvasive Continuous Monitoring of Adipocyte Differentiation: From Macro to Micro Scales

3T3-L1 cells serve as model systems for studying adipogenesis and research of adipose tissue-related diseases, e.g. obesity and diabetes. Here, we present two novel and complementary nondestructive methods for adipogenesis analysis of living cells which facilitate continuous monitoring of the same culture over extended periods of time, and are applied in parallel at the macro- and micro-scales. At the macro-scale, we developed visual differences mapping (VDM), a novel method which allows to determine level of adipogenesis (LOA)-a numerical index which quantitatively describes the extent of differentiation in the whole culture, and percentage area populated by adipocytes (PAPBA) across a whole culture, based on the apparent morphological differences between preadipocytes and adipocytes. At the micro-scale, we developed an improved version of our previously published image-processing algorithm, which now provides data regarding single-cell morphology and lipid contents. Both methods were applied here synergistically for measuring differentiation levels in cultures over multiple weeks. VDM revealed that the mean LOA value reached 1.11 ± 0.06 and the mean PAPBA value reached &gt;60%. Micro-scale analysis revealed that during differentiation, the cells transformed from a fibroblast-like shape to a circular shape with a build-up of lipid droplets. We predict a vast potential for implementation of these methods in adipose-related pharmacological research, such as in metabolic-syndrome studies.

Adipogenesis and lipid production in adipocytes subjected to sustained tensile deformations and elevated glucose concentration: a living cell-scale model system of diabesity

Adipocyte fate commitment is characterized by morphological changes of fibroblastic pre-adipocyte cells, and specifically by accumulation of lipid droplets (LDs) as part of the adipogenesis metabolism. Formation of LDs indicates the production of triglycerides from glucose through an insulin-regulated glucose internalization process. In obesity, adipocytes typically become insulin resistant, and glucose transport into the cells is impaired, resulting in type 2 diabetes. In the present study, we monitored the adipogenesis in 3T3-L1 cultured cells exposed to high (450 mg/dL hyperglycemia) and low (100 mg/dL physiological) glucose concentrations, in a novel cell culture model system of diabesity. In addition to glucose conditions, cells were concurrently exposed to different substrate tensile strains (12% and control) based on our prior work which revealed that adipogenesis is accelerated in cultures subjected to static, chronic substrate tensile deformations. Phase-contrast images were taken throughout the adipogenesis process (3 weeks) and were analyzed by an image processing algorithm which quantitatively monitors cell differentiation and lipid accumulation (number of LDs per cell and their radius as well as cell size and shape). The results indicated that high glucose concentrations and substrate tensile strains delivered to adipocytes accelerated lipid production by 1.7- and 1.4-fold, respectively. In addition, significant changes in average cell projected area and in other morphological attributes were observed during the differentiation process. The importance of this study is in characterizing the adipogenesis parameters as potential read-outs that can predict the occurrence of insulin resistance in the development of diabesity.

Effects of Frequency and Acceleration Amplitude on Osteoblast Mechanical Vibration Responses: A Finite Element Study

Bone cells are deformed according to mechanical stimulation they receive and their mechanical characteristics. However, how osteoblasts are affected by mechanical vibration frequency and acceleration amplitude remains unclear. By developing 3D osteoblast finite element (FE) models, this study investigated the effect of cell shapes on vibration characteristics and effect of acceleration (vibration intensity) on vibrational responses of cultured osteoblasts. Firstly, the developed FE models predicted natural frequencies of osteoblasts within 6.85-48.69 Hz. Then, three different levels of acceleration of base excitation were selected (0.5, 1, and 2 g) to simulate vibrational responses, and acceleration of base excitation was found to have no influence on natural frequencies of osteoblasts. However, vibration response values of displacement, stress, and strain increased with the increase of acceleration. Finally, stress and stress distributions of osteoblast models under 0.5 g acceleration in Z-direction were investigated further. It was revealed that resonance frequencies can be a monotonic function of cell height or bottom area when cell volumes and material properties were assumed as constants. These findings will be useful in understanding how forces are transferred and influence osteoblast mechanical responses during vibrations and in providing guidance for cell culture and external vibration loading in experimental and clinical osteogenesis studies.

Maturation of Adipocytes is Suppressed by Fluid Shear Stress

Preadipocytes are mechano-responsive cells and their differentiation to adipocytes may be regulated by various types of physical stimulation. Understanding the mechanism of differentiation, which increases the number of adipocytes and lipid accumulation is important in the study of obesity-related diseases. In this study, we investigated the effects of physical stimulation at different stages of adipogenic differentiation using physiological levels of fluid shear stress. Preadipocytes were treated with dexamethasone, 3-isobutyl-1-methylxanthine and insulin for 3 days (induction period) and incubated for additional 6 days for maturation. Fluid shear stress of 1 Pa at 1 Hz was applied for 1 h at different stages of differentiation. Fluid shear stress applied at the maturation period significantly reduced the expressions of C/enhancer binding protein (EBP)α and peroxisome proliferator-activated receptor (PPAR)γ2 leading to reduced lipid accumulation. Fluid shear stress applied at the early or late stages of the induction period only decreased peroxisome proliferator-activated receptor γ2 expression without any significant changes in lipid accumulation. Stimulation at multiple days during the induction period did not result in changes in lipid accumulation compared to stimulation at a single day. These results suggest that lipid droplet accumulation is effectively decreased by fluid shear stress applied during the cell maturation period. Understanding the cellular response to physical stimulation throughout the entire adipocyte differentiation period may be important in controlling adipogenesis by physical stimulation.

Computational simulation of static/cyclic cell stimulations to investigate mechanical modulation of an individual mesenchymal stem cell using confocal microscopy

It has been found that cells react to mechanical stimuli, while the type and magnitude of these cells are different in various physiological and pathological conditions. These stimuli may affect cell behaviors via mechanotransduction mechanisms. The aim of this study is to evaluate mechanical responses of a mesenchymal stem cell (MSC) to a pressure loading using finite elements method (FEM) to clarify procedures of MSC mechanotransduction. The model is constructed based on an experimental set up in which statics and cyclic compressive loads are implemented on a model constructed from a confocal microscopy 3D image of a stem cell. Both of the applied compressive loads are considered in the physiological loading regimes. Moreover, a viscohyperelastic material model was assumed for the cell through which the finite elements simulation anticipates cell behavior based on strain and stress distributions in its components. As a result, high strain and stress values were captured from the viscohyperelastic model because of fluidic behavior of cytosol when compared with the obtained results through the hyperelastic models. It can be concluded that the generated strain produced by cyclic pressure is almost 8% higher than that caused by the static load and the von Mises stress distribution is significantly increased to about 150kPa through the cyclic loading. In total, the results does not only trace the efficacy of an individual 3D model of MSC using biomechanical experiments of cell modulation, but these results provide knowledge in interpretations from cell geometry. The current study was performed to determine a realistic aspect of cell behavior.