Urethral lumen occlusion by artificial sphincteric devices: a computational biomechanics approach

In silico assessment of the reliability and performance of artificial sphincter for urinary incontinence

BACKGROUND

The standard artificial urinary sphincter (AUS) is an implantable device for the treatment of urinary incontinence by applying a pressure loading around the urethra through an inflatable cuff, often inducing no-physiological stimulation up to tissue degenerative phenomena. A novel in silico approach is proposed to fill the gap of the traditional procedures by providing tools to quantitatively assess AUS reliability and performance based on AUS-urethra interaction.

METHODS

The approach requires the development of 3D numerical models of AUS and urethra, and experimental investigations to define their mechanical behaviors. Computational analyses are performed to simulate the urethral lumen occlusion by AUS inflation under different pressures, and the lumen opening by applying an intraluminal pressure progressively increased under the AUS action (Abaqus Explicit solver). The AUS reliability is evaluated in terms of tissue stimulation by the mechanical fields potentially responsible for vasoconstriction and tissue damage, while the performance by the intraluminal pressure that causes the lumen opening for a specific occlusive pressure, showing the maximum urethral pressure for which continence is guaranteed.

RESULTS

The present study implemented the procedure considering the gold standard AMS 800 and a novel patented AUS. Results provided the comparison between two sphincteric devices and the evaluation of the influence of different building materials and geometrical features on the AUS functionality.

CONCLUSIONS

The approach was developed for the AUS, but it could be adapted also to artificial sphincters for the treatment of other anatomical dysfunctions, widening the analyzable device configurations and reducing experimental and ethical efforts.

Biomechanical study of the male lower urinary tract: Simulation of internal and external sphincters dyssynergia

Urethral sphincter dysfunction is an important cause of stress urinary incontinence (SUI). The most effective treatment is the insertion of an artificial urethral sphincter (AUS), which relies to a large extent on the surgeon's experience. However, there is no quantitative standard for cuff tightness, resulting in frequent postoperative complications. This study aimed to investigate the effect of internal and external sphincter dyssynergia on urodynamic parameters in the lower urinary tract. A geometric model of male lower urinary tract tissue was constructed from collodion slices, accounting for the active behavior of the internal and external sphincters. Normal and dyssynergic internal and external sphincters (active sphincter behavior was individually injured by 25%, 50%, 75%, or 100%) were simulated with fluid-structure interactions and changes in urethral stress, displacement, and urine flow rate were detected. We found that when the internal sphincter was injured by 25%, 50%, 75%, and 100%, urethral stress near the internal sphincter decreased by 8.3%, 15.6%, 24.3%, and 35.7%, respectively. Additionally, when the external sphincter was injured by 25%, 50%, 75%, and 100%, urethral stress near the external sphincter was reduced by 13.3%, 24.3%, 38.6%, and 46.6%, respectively. Internal sphincter injury primarily affects positions near the internal sphincter and prostate, while external sphincter injury affects the area between the prostate and urethral outlet. These data could facilitate the standardized evaluation of internal and external sphincter dysfunction and lead to novel methods of preoperative assessment for AUS surgery.

Biomechanics of Hollow Organs: Experimental Testing and Computational Modeling

Hollow organs are visceral organs that are hollow tubes or pouches (such as the intestine or the stomach, respectively) or that include a cavity (such as the heart) and which subserve a vital function [...].

Mathematical modeling of the lower urinary tract: A review

AIMS

Understand what progress has been made toward a functionally predictive lower urinary tract (LUT) model, identify knowledge gaps, and develop from them a path forward.

METHODS

We surveyed prominent mathematical models of the basic LUT components (bladder, urethra, and their neural control) and categorized the common modeling strategies and theoretical assumptions associated with each component. Given that LUT function emerges from the interaction of these components, we emphasized attempts to model their connections, and highlighted unmodeled aspects of LUT function.

RESULTS

There is currently no satisfactory model of the LUT in its entirety that can predict its function in response to disease, treatment, or other perturbations. In particular, there is a lack of physiologically based mathematical descriptions of the neural control of the LUT.

CONCLUSIONS

Based on our survey of the work to date, a potential path to a predictive LUT model is a modular effort in which models are initially built of individual tissue-level components using methods that are extensible and interoperable, allowing them to be connected and tested in a common framework. A modular approach will allow the larger goal of a comprehensive LUT model to be in sight while keeping individual efforts manageable, ensure new models can straightforwardly build on prior research, respect potential interactions between components, and incentivize efforts to model absent components. Using a modular framework and developing models based on physiological principles, to create a functionally predictive model is a challenge that the field is ready to undertake.

A Preliminary Validation of a New Surgical Procedure for the Treatment of Primary Bladder Neck Obstruction Using a Computational Modeling Approach

A new surgical procedure for the treatment of primary bladder neck obstruction with maintenance of anterograde ejaculation is proposed. In place of monolateral or bilateral bladder neck incision, associated with a loss of ejaculation rate of up to 30%, the new surgical procedure consists of laser drilling the bladder neck with a number of holes and without muscle fiber disruption. The effect of this novel procedure has been studied numerically, with a simplified two-dimensional numerical model of the internal urethral sphincter, varying the position and the number of holes in the fibrotic region of the urethral tissue. Results show an improvement of the urethral sphincter opening by increasing the number of holes, ranging from about 6% to 16% of recovery. Moreover, a non-aligned position of holes positively influences the opening recovery. The concentrations of maximum principal strain and stress have been registered in the proximity of the interface between the physiologic and diseased sphincter, and in those regions where the radial thickness is significantly thinner. The effects on the first five patients have been included in the study, showing improvement in micturition, lower urinary tract symptoms, sustained ejaculatory function, and quality of life.

Conformation and mechanics of the polymeric cuff of artificial urinary sphincter

The surgical treatment of urinary incontinence is often performed by adopting an Artificial Urinary Sphincter (AUS). AUS cuff represents a fundamental component of the device, providing the mechanical action addressed to urethral occlusion, which can be investigated by computational approach. In this work, AUS cuff is studied with reference to both materials and structure, to develop a finite element model. Materials behavior is investigated using physicochemical and mechanical characterization, leading to the formulation of a constitutive model. Materials analysis shows that AUS cuff is composed by a silicone blister joined with a PET fiber-reinforced layer. A nonlinear mechanical behavior is found, with a higher stiffness in the outer layer due to fiber-reinforcement. The cuff conformation is acquired by Computer Tomography (CT) both in deflated and inflated conditions, for an accurate definition of the geometrical characteristics. Based on these data, the numerical model of AUS cuff is defined. CT images of the inflated cuff are compared with results of numerical analysis of the inflation process, for model validation. A relative error below 2.5% was found. This study is the first step for the comprehension of AUS mechanical behavior and allows the development of computational tools for the analysis of lumen occlusion process. The proposed approach could be adapted to further fluid-filled cuffs of artificial sphincters.

Investigation of interaction phenomena between lower urinary tract and artificial urinary sphincter in consideration of urethral tissues degeneration

Lower urinary tract dysfunction pertains to symptoms related to the lower urinary tract (LUT), with consequent incontinence. Artificial urinary sphincters (AUS) are adopted to obtain continence conditions, mainly in male subjects, via urethral occlusion by applying pressure load, mostly operating on the basis of an empirical approach. Considering the frequent access of elderly patients to this surgical practice, tissue degradation related to aging phenomena must be investigated. Computational models of the LUT structures and the AUS systems have been designed to evaluate tissues mechanical stimulation and degenerative phenomena for reciprocal interaction. Virtual solid models of the LUT have been developed starting from biomedical images, as histological/morphometrical data. Segmentation procedures have been exploited to provide the three-dimensional reconstruction, and subsequent discretization techniques led to the finite element model. Contemporarily, a finite element model of a typical AUS device was developed. Numerical analyses have been performed to analyze interaction phenomena between AUS and LUT. Different conditions were investigated, modifying both loading conditions, as intraluminal pressure and AUS action, and urethral tissues properties. Particular attention was devoted to tissues parameters, aiming to evaluate the influence of tissues degeneration because of aging and/or pathologies.

Comparative analysis of occlusion methods for artificial sphincters

An artificial sphincter is a device that replaces the function of the biological sphincter by occluding the relative biological lumen. The investigation of occlusion methods for artificial sphincters is crucial for a reliable and effective design of such devices. The compression induced onto the tissue by a certain pressure depends on the biomechanical and physiological features of the lumen and on the specific occlusion method. A numerical model and an experimental evaluation are presented here to assess the efficiency of different occlusion methods. Numerical models of circumferential occlusion and clamping occlusion methods to simulate the compression of the biological lumen were developed. Results revealed a relationship between the efficiency of the occlusion method and the physiological condition of the lumen. With differences related to the testing setup, this relationship was also confirmed experimentally by conducting tests on biological simulators. We analyzed the occlusion method to adopt as the physiological pressure (ie, leakage pressure values) changed. In particular, we focused on the urinary incontinence, which is a dysfunction involving the external sphincter surrounding the urethra. In this scenario, we demonstrated that a clamping occlusion is an efficient method to compress the urethra, whose physiological pressures range between 4 and 12 kPa. The clamping occlusion method resulted up to 35% more efficient in terms of sealing pressure than the circumferential one for a closing pressure varying between 2.3 and 11.5 kPa.

Biomechanical analysis of the interaction phenomena between artificial urinary sphincter and urethral duct

Male urinary incontinence is a widespread healthcare problem, leading to a miserable quality of life. Artificial urinary sphincter (AUS) is a device inserted mostly around the urethra in adult males, which mimics the urinary sphincter by providing a closure during urinary storage and a subsequent open to permit voiding. The interaction phenomena occurring between AUS cuff and urethral duct represent a fundamental problem in the investigation of AUS reliability and durability. In this work, computational methods are exploited to deeply investigate the mechanics of interaction phenomena occurring between urethral duct and AUS device. Experimental studies are performed on urethral tissues, and structural tests are carried out on the overall urethral duct to obtain a large set of information required for mechanical properties definition. The mechanical behavior of AUS cuff is investigated using mechanical and physicochemical procedures. The cuff conformation is acquired by computed tomography techniques for the definition of the numerical model. Numerical analyses are developed to evaluate the mechanical response of urethral duct in interaction with AUS cuff, considering the lumen occlusion process for maintaining urinary continence. Finally, the investigation of the compressive stress and strain fields within urethral tissues allows the identification of device performance and reliability in correlation with surgical practice.

Modern Theories of Pelvic Floor Support : A Topical Review of Modern Studies on Structural and Functional Pelvic Floor Support from Medical Imaging, Computational Modeling, and Electromyographic Perspectives

PURPOSE OF REVIEW

Weakened pelvic floor support is believed to be the main cause of various pelvic floor disorders. Modern theories of pelvic floor support stress on the structural and functional integrity of multiple structures and their interplay to maintain normal pelvic floor functions. Connective tissues provide passive pelvic floor support while pelvic floor muscles provide active support through voluntary contraction. Advanced modern medical technologies allow us to comprehensively and thoroughly evaluate the interaction of supporting structures and assess both active and passive support functions. The pathophysiology of various pelvic floor disorders associated with pelvic floor weakness is now under scrutiny from the combination of (1) morphological, (2) dynamic (through computational modeling), and (3) neurophysiological perspectives. This topical review aims to update newly emerged studies assessing pelvic floor support function among these three categories.

RECENT FINDINGS

A literature search was performed with emphasis on (1) medical imaging studies that assess pelvic floor muscle architecture, (2) subject-specific computational modeling studies that address new topics such as modeling muscle contractions, and (3) pelvic floor neurophysiology studies that report novel devices or findings such as high-density surface electromyography techniques. We found that recent computational modeling studies are featured with more realistic soft tissue constitutive models (e.g., active muscle contraction) as well as an increasing interest in simulating surgical interventions (e.g., artificial sphincter). Diffusion tensor imaging provides a useful non-invasive tool to characterize pelvic floor muscles at the microstructural level, which can be potentially used to improve the accuracy of the simulation of muscle contraction. Studies using high-density surface electromyography anal and vaginal probes on large patient cohorts have been recently reported. Influences of vaginal delivery on the distribution of innervation zones of pelvic floor muscles are clarified, providing useful guidance for a better protection of women during delivery. We are now in a period of transition to advanced diagnostic and predictive pelvic floor medicine. Our findings highlight the application of diffusion tensor imaging, computational models with consideration of active pelvic floor muscle contraction, high-density surface electromyography, and their potential integration, as tools to push the boundary of our knowledge in pelvic floor support and better shape current clinical practice.

Experimental characterization and constitutive modeling of the biomechanical behavior of male human urethral tissues validated by histological observations

This work aims at observing the mechanical behavior of the membranous and spongy portions of urethrae sampled on male cadavers in compliance with French regulations on postmortem testing, in accordance with the Scientific Council of body donation center of Grenoble. In this perspective, a thermostatic water tank was designed to conduct ex vivo planar tension tests in a physiological environment, i.e., in a saline solution at a temperature of [Formula: see text] [Formula: see text]. In order to observe the anisotropy of the tissues, the samples were tested in two directions. Tests consisting of a series of load-unload cycles of increasing amplitudes were performed to highlight their viscous behavior. The results were then discussed according to the microstructure of tissue, which was investigated using different staining methods and histological analysis. The observed behaviors were then fitted using an anisotropic hyperelastic or a visco-hyperelastic matrix-fiber model.

Urethral lumen occlusion by artificial sphincteric device: Evaluation of degraded tissues effects

Urinary incontinence can be surgically treated by means of artificial sphincters, based on a cuff that provides a pressure around the urethra to occlude the lumen. Considering the frequent access of elderly patients to this surgical practice, tissue degradation phenomena must be investigated, since they could affect treatment reliability and durability. The potential degradation can be interpreted considering a variation within soft tissue constitutive formulation, by means of a correlation between mechanical properties and tissues ageing. The overall compressibility varies, as characteristics aspect of soft tissue mechanical response with age, as well as the stiffness. The investigation is performed by means of a three dimensional numerical model of the urethral duct. The effects of the interaction phenomenon with a cuff is interpreted considering the changes, within the constitutive models, of the basic parameters that define the potential degradation process. The deformation related to compressibility is recalled, ranging between ten and fifty percent in dependence on the degradation level considered. This parameter, reported mostly as representative of the aging effect, shows a large variation that confirms the relevance of the investigation performed toward a sensitivity of the mechanical response of the urethral duct referred to the lumen occlusion.