Influence of muscle groups' activation on proximal femoral growth tendency

ESMAC Best Paper Award 2023: Increased knee flexion in participants with cerebral palsy results in altered stresses at the distal femoral growth plate compared to a typically developing cohort

INTRODUCTION

Femoral deformities are highly prevalent in children with cerebral palsy (CP) and can have a severe impact on patients' gait abilities. While the mechanical stress regime within the distal femoral growth plate remains underexplored, understanding it is crucial given bone's adaptive response to mechanical stimuli. We quantified stresses at the distal femoral growth plate to deepen our understanding of the relationship between healthy and pathological gait patterns, internal loading, and femoral growth patterns.

METHODS

This study included three-dimensional motion capture data and magnetic resonance images of 13 typically developing children and twelve participants with cerebral palsy. Employing a multi-scale mechanobiological approach, integrating musculoskeletal simulations and subject-specific finite element analysis, we investigated the orientation of the distal femoral growth plate and the stresses within it. Limbs of participants with CP were grouped depending on their knee flexion kinematics during stance phase as this potentially changes the stresses induced by knee and patellofemoral joint contact forces.

RESULTS

Despite similar growth plate orientation across groups, significant differences were observed in the shape and distribution of growth values. Higher growth rates were noted in the anterior compartment in CP limbs with high knee flexion while CP limbs with normal knee flexion showed high similarity to the group of healthy participants.

DISCUSSION

Results indicate that the knee flexion angle during the stance phase is of high relevance for typical bone growth at the distal femur. The evaluated growth rates reveal plausible results, as long-term promoted growth in the anterior compartment leads to anterior bending of the femur which was confirmed for the group with high knee flexion through analyses of the femoral geometry. The framework for these multi-scale simulations has been made accessible on GitHub, empowering peers to conduct similar mechanobiological studies. Advancing our understanding of femoral bone development could ultimately support clinical decision-making.

The Etiology of Neuromuscular Hip Dysplasia and Implications for Management: A Narrative Review

This study summarizes the current knowledge of the etiology of hip dysplasia in children with neuromuscular disease and the implications for management. This article is based on a review of development of the hip joint from embryology through childhood growth. This knowledge is then applied to selective case reviews to show how the understanding of these developmental principles can be used to plan specific treatments. The development of the hip joint is controlled by genetic shape determination, but the final adult shape is heavily dependent on the mechanical environment experienced by the hip joint during growth and development. Children with neuromuscular conditions show a high incidence of coxa valga, hip dysplasia, and subluxation. The etiology of hip pathology is influenced by factors including functional status, muscular tone, motor control, child's age, and muscle strength. These factors in combination influence the development of high neck-shaft angle and acetabular dysplasia in many children. The hip joint reaction force (HJRF) direction and magnitude determine the location of the femoral head in the acetabulum, the acetabular development, and the shape of the femoral neck. The full range of motion is required to develop a round femoral head. Persistent abnormal direction and/or magnitude of HJRF related to the muscular tone can lead to a deformed femoral head and a dysplastic acetabulum. Predominating thigh position is the primary cause defining the direction of the HJRF, leading to subluxation in nonambulatory children. The magnitude and direction of the HJRF determine the acetabular shape. The age of the child when these pathomechanics occur acts as a factor increasing the risk of hip subluxation. Understanding the risk factors leading to hip pathology can help to define principles for the management of neurologic hip impairment. The type of neurologic impairment as defined by functional severity assessed by Gross Motor Function Classification System and muscle tone can help to predict the risk of hip joint deformity. A good understanding of the biomechanical mechanisms can be valuable for treatment planning.

Muscle forces acting on the greater trochanter lead to a dorsal warping of the apophyseal growth plate

The apophyseal growth plate of the greater trochanter, unlike most other growth plates of the human body, exhibits a curved morphology that results in a divergent pattern resembling an open crocodile mouth on plain antero-posterior radiographs. To quantify the angular alignment of the growth plate and to draw conclusions about the function of the muscles surrounding it, we analyzed 57 MRI images of 51 children and adolescents aged 3-17 years and of six adults aged 18-52 years. We measured the angulation of the plate relative to the horizontal plane (AY angle) and the trajectories of the muscles attaching to the greater trochanter of the proximal femur. From anterior to posterior, the AY angle shows a decrease of 33.44°. In the anterior third, the cartilage is angled at a mean of 51.64°, and in the posterior third, the mean angulation is 18.6°. This indicates that the cartilage in the anterior region of the greater trochanteric apophysis is subject to more vertically oriented force vectors compared to the posterior region, as the growth plates align perpendicular to the force vectors acting on them. Combining the measured muscle trajectories with the physiological cross-sectional areas (PCSA) available from the literature revealed that, in addition to the known internal and external lateral traction ligament systems, a third, dorsally located traction ligament system exists that may be responsible for the dorsal deformation of the AY angle.

Neonatal Hip Loading in Developmental Dysplasia: Finite Element Simulation of Proximal Femur Growth and Treatment

Background

Abnormal prenatal hip joint loading can lead to compromised hip joint function. Early intervention is crucial for favorable outcomes.

Purpose

This study investigates the impact of treatment timing (initiation and duration) on cartilage growth and ossification in the proximal femur of infants with developmental dysplasia of the hip, a condition affecting newborns.

Methods

We used a mechanobiological model to simulate proximal femur growth during treatment durations of 3 months, 6 months, and a late-start treatment.

Results

The findings indicate that the timing of treatment initiation is crucial, while a longer treatment duration does not contribute to improved morphological development of the hip joint.

Conclusions

Mechanobiological models of growth can be used to develop treatments and therapies that correct loading conditions. Growing bone is particularly sensitive to loading conditions, and altered loading during growth can affect bone shape and functionality.

Can pelvic tilt cause cam morphology? A computational model of proximal femur development mechanobiology

Cam deformity of the proximal femur is a risk factor for early osteoarthritis. While cam morphology is related to mechanical force at a formative time in skeletal growth, the specific problematic forces contributing to the development of cam morphology remain unknown. Individuals with femoroacetabular impingement syndrome exhibit an increased anterior pelvic tilt during walking, which alters their hip joint forces. This study aims to investigate the influence of altered joint force caused by anterior pelvic tilt on proximal femur epiphyseal growth and the potential association between increased anterior pelvic tilt and the development of cam morphology. A computational model is utilized to simulate the endochondral ossification in the proximal femur and predict cam formation. Cartilage growth and ossification patterns for a gait cycle with and without anterior pelvic tilt were modeled. The simulated growth results indicated an increased alpha angle (53° for typically developing to 68° for anterior pelvic tilt) and aspherical femoral head in the model with anterior pelvic tilt. We conclude that anterior pelvic tilt may be sufficient to cause the formation of the cam morphology. Identifying the critical mechanical conditions that increase the risk of cam deformity could help prevent this condition by adjusting the physical activities before skeletal maturity.

Influence of tension-band plates on the mechanical loading of the femoral growth plate during guided growth due to coronal plane deformities

Introduction: Correction of knee malalignment by guided growth using a tension-band plate is a common therapy to prevent knee osteoarthritis among other things. This approach is based on the Hueter-Volkmann law stating that the length growth of bones is inhibited by compression and stimulated by tension. How the locally varying mechanical loading of the growth plate is influenced by the implant has not yet been investigated. This study combines load cases from the gait cycle with personalized geometry in order to investigate the mechanical influence of the tension-band plates. Methods: Personalized finite element models of four distal femoral epiphyses of three individuals, that had undergone guided growth, were generated. Load cases from the gait cycles and musculoskeletal modelling were simulated with and without implant. Morphological features of the growth plates were obtained from radiographs. 3D geometries were completed using non-individual Magnetic Resonance Images of age-matched individuals. Boundary conditions for the models were obtained from instrumented gait analyses. Results: The stress distribution in the growth plate was heterogenous and depended on the geometry. In the insertion region, the implants locally induced static stress and reduced the cyclic loading and unloading. Both factors that reduce the growth rate. On the contralateral side of the growth plate, increased tension stress was observed, which stimulates growth. Discussion: Personalized finite element models are able to estimate the changes of local static and cyclic loading of the growth plate induced by the implant. In future, this knowledge can help to better control growth modulation and avoid the return of the malalignment after the treatment. However, this requires models that are completely participant-specific in terms of load cases and 3D geometry.

The anatomy of the hindlimb of Theropithecus brumpti (Cercopithecidae, Papionini): Morphofunctional implications

Theropithecus brumpti is a primate known from numerous craniodental specimens in the Plio-Pleistocene Shungura Formation (Lower Omo Valley, Ethiopia), but the anatomy of its hindlimb is documented only by a few associated and mostly incomplete postcranial specimens. The adaptations of T. brumpti are still debated, with its substrate preferences and its use of squatting postures recently discussed based on anatomical differences when compared with its extant representative, Theropithecus gelada. Here, we describe an associated femur and tibia (L 869-1 and L 869-2) of a presumed T. brumpti male and a partial foot (L 865-1r and L 865-1t) of a male T. brumpti, dated to ca. 2.6 Ma and ca. 2.32 Ma respectively. Based on univariate and bivariate morphometric analyses, we provide new data on the morphological correlates of substrate preferences and postural behaviors of this fossil species. Our results are in agreement with previous analyses and present T. brumpti as a predominantly terrestrial primate. We demonstrate the presence of osteological correlates associated with the use of squatting behaviors in T. brumpti but also point to significant anatomical differences between this paleontological species and T. gelada. These differences blur the functional value of characters previously identified as diagnostic of T. gelada and its postural behavior. We further document the postcranial distinctiveness of the Theropithecus clade in relation to the Papio clade. This study thus provides new insights into the postcranial anatomy and paleoecology of an abundant fossil primate from the Plio-Pleistocene of eastern Africa.

Intra- and inter-subject variability of femoral growth plate stresses in typically developing children and children with cerebral palsy

Little is known about the influence of mechanical loading on growth plate stresses and femoral growth. A multi-scale workflow based on musculoskeletal simulations and mechanobiological finite element (FE) analysis can be used to estimate growth plate loading and femoral growth trends. Personalizing the model in this workflow is time-consuming and therefore previous studies included small sample sizes (N < 4) or generic finite element models. The aim of this study was to develop a semi-automated toolbox to perform this workflow and to quantify intra-subject variability in growth plate stresses in 13 typically developing (TD) children and 12 children with cerebral palsy (CP). Additionally, we investigated the influence of the musculoskeletal model and the chosen material properties on the simulation results. Intra-subject variability in growth plate stresses was higher in cerebral palsy than in typically developing children. The highest osteogenic index (OI) was observed in the posterior region in 62% of the TD femurs while in children with CP the lateral region was the most common (50%). A representative reference osteogenic index distribution heatmap generated from data of 26 TD children's femurs showed a ring shape with low values in the center region and high values at the border of the growth plate. Our simulation results can be used as reference values for further investigations. Furthermore, the code of the developed GP-Tool ("Growth Prediction-Tool") is freely available on GitHub (https://github.com/WilliKoller/GP-Tool) to enable peers to conduct mechanobiological growth studies with larger sample sizes to improve our understanding of femoral growth and to support clinical decision making in the near future.

Optimal bone biopsy route to the proximal femur evaluated by computed tomography-based finite element modeling

INTRODUCTION

The proximal femur (PF) is one of the most common locations of benign cystic lesions. A fracture after bone biopsy is a rare but severe complication. However, the risk of fracture after biopsy of this lesion has not been well-studied. Computed tomography (CT)-based finite element (FE) modeling estimates the elastic modulus and compressive strength enables fracture prediction. This study investigated strength of PF after biopsy by CT-FE modeling and determined the optimum biopsy level and size.

MATERIALS AND METHODS

Six male bone tumor patients' (15-38 years) total femur CT data (slice thickness, 0.8-1.0 mm) of the healthy side were obtained. Three different cylindrical bone defect (BD) diameters (10, 15, and 20 mm) were set on the lateral surface of PF at the following levels: level 1, insertion of the gluteus minimums; level 2, lower end of the greater trochanter (GT); level 3, origin of the vastus lateralis; level 4, center of the lesser trochanter (LT); and level 5, lower end of LT using Mechanical Finder software (version 8.0). Virtual loads were applied with incremental increases of 100 N until fracture occurred and the fracture load (FL) was evaluated.

RESULTS

For BD with a diameter of 15 and 20 mm, there was a significant difference in the decrease of the mean FL, with an average of 22% at level 4 and 5, and 33%-44% at levels 3 to 5, respectively. At level 1 and 2, no significant decrease in the mean FL was observed regardless of the diameter of BD.

CONCLUSION

Biopsies at level 1 and 2 showed no significant decrease in bone strength. However, biopsy at level 1 may contaminate the GT bursas. Therefore, biopsy at level 2 (lower end of GT) can avoid contamination and minimize the effect on bone strength.

The dinosaurian femoral head experienced a morphogenetic shift from torsion to growth along the avian stem

Significant evolutionary shifts in locomotor behaviour often involve comparatively subtle anatomical transitions. For dinosaurian and avian evolution, medial overhang of the proximal femur has been central to discussions. However, there is an apparent conflict with regard to the evolutionary origin of the dinosaurian femoral head, with neontological and palaeontological data suggesting seemingly incongruent hypotheses. To reconcile this, we reconstructed the evolutionary history of morphogenesis of the proximal end of the femur from early archosaurs to crown birds. Embryological comparison of living archosaurs (crocodylians and birds) suggests the acquisition of the greater overhang of the femoral head in dinosaurs results from additional growth of the proximal end in the medial-ward direction. On the other hand, the fossil record suggests that this overhang was acquired by torsion of the proximal end, which projected in a more rostral direction ancestrally. We reconcile this apparent conflict by inferring that the medial overhang of the dinosaur femoral head was initially acquired by torsion, which was then superseded by mediad growth. Details of anatomical shifts in fossil forms support this hypothesis, and their biomechanical implications are congruent with the general consensus regarding broader morpho-functional evolution on the avian stem.

Computational model of endochondral ossification: Simulating growth of a long bone

Mechanical loading is a crucial factor in joint and bone development. Using a computational model, we investigated the role of mechanics on cartilage growth rate, ossification of the secondary center, formation of the growth plate, and overall bone shape. A computational algorithm was developed and implemented into finite element models to simulate the endochondral ossification for symmetric and asymmetric motion in a generic diarthrodial joint. Under asymmetric loading condition the secondary center ossifies asymmetrically leaning toward the external load and results in tilted growth plate. Also the mechanics seems to have greater influence in the early onset of the ossification of the secondary center rather than later progression of the center. While previous models have simulated select stages of skeletal development, our model can simulate growth and ossification during the entirety of post-natal development. Such computational models of skeletal development may provide insight into specific loading conditions that cause bone and joint deformities, and the required timing for rehabilitative repair.

ESB Clinical Biomechanics Award 2020: Pelvis and hip movement strategies discriminate typical and pathological femoral growth - Insights gained from a multi-scale mechanobiological modelling framework

BACKGROUND

Many children with cerebral palsy (CP) develop skeletal deformities during childhood. So far, it is unknown why some children with CP develop bony deformities whereas others do not. The aims of this study were to (i) investigate what loading characteristics lead to typical and pathological femoral growth, and (ii) evaluate why some children with CP develop femoral deformities whereas other do not.

METHODS

A multi-scale mechanobiological modelling workflow was used to simulate femoral growth based on three-dimensional motion capture data of six typically developing children and 16 children with CP. Based on the growth results, the participants with CP were divided into two groups: typical growth group and pathological growth group. Gait kinematics and femoral loading were compared between simulations resulting in typical growth and those resulting in pathologic growth.

FINDINGS

Hip joint contact forces were less posteriorly-oriented in the pathological growth simulations compared to the typical ones. Compared to the typically developing participants, the CP group with pathological femoral growth presented increased knee flexion and no hip extension. The CP group with simulated typical growth presented similar sagittal plane joint kinematics but differed in the frontal plane pelvic and hip movement strategy, which normalized the hip joint contact force and therefore contributed to typical femoral growth trends.

INTERPRETATION

Our simulation results identified specific gait features, which may contribute to pathological femoral growth. Furthermore, the hip joint contact force orientation in the sagittal plane seems to be the dominant factor for determining femoral growth simulations.

The relationship between osteoporosis and sarcopenia, according to EWGSOP-2 criteria, in outpatient elderly

INTRODUCTION

Osteoporosis and sarcopenia are significant health problems that mainly affect older adults. This study aimed to investigate the relationship between sarcopenia and osteoporosis.

MATERIALS AND METHODS

The study included 444 participants who had undergone a dual-energy X-ray absorptiometry scan, handgrip test, 4-m walking speed test, and bioimpedance analysis within the past year. Participants were classified into control, osteopenia, or osteoporosis groups according to the World Health Organization classification. Sarcopenia was diagnosed according to the European Working Group on Sarcopenia in Older People-2 criteria.

RESULTS

The mean age of the participants was 75.88 ± 7.20 years, and 80.9% were females. There were 144, 230, and 70 participants in the osteoporosis, osteopenia, and control groups, respectively. Probable sarcopenia was identified in 94 subjects, sarcopenia in 61, and severe sarcopenia in 72 participants. After adjusting for age, gender, and body mass index, probable sarcopenia and severe sarcopenia were associated with osteoporosis (p < 0.05). Low muscle strength, and low physical performance were associated with osteoporosis (p < 0.02). When osteoporosis was evaluated only according to the femoral neck T score, low muscle strength and low physical performance were found to be related not only to osteoporosis (p < 0.001), but also to osteopenia (p < 0.05). Additionally, probable sarcopenia was associated with femoral neck osteopenia (p < 0.01).

CONCLUSIONS

In this study, probable sarcopenia and severe sarcopenia were associated with osteoporosis in older adults. Furthermore, we found that low muscle strength, or dynapenia, which is the determining criterion of sarcopenia, was related to femoral neck osteopenia and osteoporosis.

Influence of loading direction due to physical activity on proximal femoral growth tendency

Longitudinal bone growth is regulated by mechanical forces arising from physical activity, whose directions and magnitudes depend on activity kinematics and intensity. This study aims to investigate the influence of common physical activities on proximal femoral morphological tendency due to growth at the femoral head growth plate. A subject-specific femur model based on magnetic resonance images of one able-bodied 6-year old child was developed, and the directions of hip contact force were described as load samples at a constant magnitude. Finite element analysis was performed to predict growth rate and growth direction, and expected changes in neck-shaft angle and femoral anteversion were computed corresponding to circa 4 months of growth. For most loading conditions, neck-shaft angle and femoral anteversion decreased during growth, corresponding to the femur's natural course during normal growth. The largest reduction in neck-shaft angle and femoral anteversion was approximately 0.25° and 0.15°. Our results suggest that most common physical activities induce the expected morphological changes in normal growth in able-bodied children. Understanding the influence of contact forces during less common activities on proximal femoral development might provide improved guidelines and treatment planning for children who have or are at risk of developing a femoral deformity.

Femoral anteversion: significance and measurement

Femoral neck anteversion (FNA) is the angle between the femoral neck and femoral shaft, indicating the degree of torsion of the femur. Differences in FNA affect the biomechanics of the hip, through alterations in factors such as moment arm lengths and joint loading. Altered gait associated with differences in FNA may also contribute to the development of a wide range of skeletal disorders including osteoarthritis. FNA varies by up to 30° within apparently healthy adults. FNA increases substantially during gestation and thereafter decreases steadily until maturity. There is some evidence of a further decrease at a much lower rate during adulthood into old age, but the mechanisms behind it have never been studied. Development of FNA appears to be strongly influenced by mechanical forces experienced during everyday movements. This is evidenced by large differences in FNA in groups where movement is impaired, such as children born breech or individuals with neuromuscular conditions such as cerebral palsy. Several methods can be used to assess FNA, which may yield different values by up to 20° in the same participant. While MRI and CT are used clinically, limitations such as their cost, scanning time and exposure to ionising radiation limit their applicability in longitudinal and population studies, particularly in children. More broadly, applicable measures such as ultrasound and functional tests exist, but they are limited by poor reliability and validity. These issues highlight the need for a valid and reliable universally accepted method. Treatment for clinically problematic FNA is usually de-rotational osteotomy; passive, non-operative methods do not have any effect. Despite observational evidence for the effects of physical activity on FNA development, the efficacy of targeted physical activity remains unexplored. The aim of this review is to describe the biomechanical and clinical consequences of FNA, factors influencing FNA and the strengths and weaknesses of different methods used to assess FNA.

A multi-scale modelling framework combining musculoskeletal rigid-body simulations with adaptive finite element analyses, to evaluate the impact of femoral geometry on hip joint contact forces and femoral bone growth

Multi-scale simulations, combining muscle and joint contact force (JCF) from musculoskeletal simulations with adaptive mechanobiological finite element analysis, allow to estimate musculoskeletal loading and predict femoral growth in children. Generic linearly scaled musculoskeletal models are commonly used. This approach, however, neglects subject- and age-specific musculoskeletal geometry, e.g. femoral neck-shaft angle (NSA) and anteversion angle (AVA). This study aimed to evaluate the impact of proximal femoral geometry, i.e. altered NSA and AVA, on hip JCF and femoral growth simulations. Musculoskeletal models with NSA ranging from 120° to 150° and AVA ranging from 20° to 50° were created and used to calculate muscle and hip JCF based on the gait analysis data of a typically developing child. A finite element model of a paediatric femur was created from magnetic resonance images. The finite element model was morphed to the geometries of the different musculoskeletal models and used for mechanobiological finite element analysis to predict femoral growth trends. Our findings showed that hip JCF increase with increasing NSA and AVA. Furthermore, the orientation of the hip JCF followed the orientation of the femoral neck axis. Consequently, the osteogenic index, which is a function of cartilage stresses and defines the growth rate, barely changed with altered NSA and AVA. Nevertheless, growth predictions were sensitive to the femoral geometry due to changes in the predicted growth directions. Altered NSA had a bigger impact on the growth results than altered AVA. Growth simulations based on mechanobiological principles were in agreement with reported changes in paediatric populations.

The potential role of the Alsberg angle as a predictor of lateral growth disturbance of the capital femoral epiphysis in children with developmental dysplasia of the hip treated by closed reduction

PURPOSE

Early diagnosis and prevention of lateral growth disturbance of the capital femoral epiphysis is challenging after treatment for developmental dysplasia of the hip (DDH). The aim of the study was to evaluate the radiographic changes of the Alsberg angle (AA) in normal children and those with DDH, and to assess the role of AA as a potential predictor of lateral growth disturbance of the capital femoral epiphysis.

METHODS

AA was measured on the anterior-posterior pelvic radiographs of 1000 normal children ranging in age from one to ten years and in 66 children (92 hips) with DDH treated by closed reduction (CR). A comparative analysis was performed.

RESULTS

In the normal children, mean AA decreased linearly with age, from 76° at age one year to 65° at age ten years, irrespective of gender and laterality. In children with DDH, the average AA was 81.5°(sd 3.9°; 74° to 87°) prior to CR; it was 75.9° (sd 4.5°; 68° to 83°) in normal children of the same age (p < 0.001). Among the 42 children (64 hips) with successfully and uneventfully treated DDH, AA reached normal values between the ages of five and six years. In contrast, children with lateral growth disturbance of the proximal femur physis (24 children, 28 hips) showed significantly higher AA values in comparison with the age-matched controls.

CONCLUSION

In DDH patients with successful CR, AA could be expected to match normal values in children between the ages of five and six years. On the other hand, AA can be used as an early predictor for lateral growth disturbance of the capital femoral epiphysis.

LEVEL OF EVIDENCE

Level III.

Investigating rolling as mechanism for humeral fractures in non-ambulant infants: a preliminary finite element study

AIM

To use personalised computed tomography (CT)-based finite element models to quantitatively investigate the likelihood of self-inflicted humeral fracture in non-ambulant infants secondary to rolling.

MATERIALS AND METHODS

Three whole-body post-mortem CT examinations of children at the age of rolling (two 4-month-old and one 6-month-old) were used. The mechanical moment needed by each infant to perform a rolling manoeuvre was calculated and applied to the finite element model in order to simulate spontaneous rolling from the prone to the supine position.

RESULTS

The maximum predicted strains were found to be substantially lower (with a difference of >80%) than the elastic limit of the bone.

CONCLUSION

Results of this study challenge the plausibility of self-inflicted humeral fracture caused by rolling in non-ambulant infants and indicate that it is unlikely for a humeral fracture to result from this mechanism without the assistance of an external force.

Spina bifida-predisposing heterozygous mutations in Planar Cell Polarity genes and Zic2 reduce bone mass in young mice

Fractures are a common comorbidity in children with the neural tube defect (NTD) spina bifida. Mutations in the Wnt/planar cell polarity (PCP) pathway contribute to NTDs in humans and mice, but whether this pathway independently determines bone mass is poorly understood. Here, we first confirmed that core Wnt/PCP components are expressed in osteoblasts and osteoclasts in vitro. In vivo, we performed detailed µCT comparisons of bone structure in tibiae from young male mice heterozygous for NTD-associated mutations versus WT littermates. PCP signalling disruption caused by Vangl2 (Vangl2Lp/+) or Celsr1 (Celsr1Crsh/+) mutations significantly reduced trabecular bone mass and distal tibial cortical thickness. NTD-associated mutations in non-PCP transcription factors were also investigated. Pax3 mutation (Pax3Sp2H/+) had minimal effects on bone mass. Zic2 mutation (Zic2Ku/+) significantly altered the position of the tibia/fibula junction and diminished cortical bone in the proximal tibia. Beyond these genes, we bioinformatically documented the known extent of shared genetic networks between NTDs and bone properties. 46 genes involved in neural tube closure are annotated with bone-related ontologies. These findings document shared genetic networks between spina bifida risk and bone structure, including PCP components and Zic2. Genetic variants which predispose to spina bifida may therefore independently diminish bone mass.