Thermal analysis of the dentine tubule under hot and cold stimuli using fluid-structure interaction simulation

Promotion of Dentin Biomimetic Mineralization and Bonding Efficacy by Interfacial Control of an Experimental Citric Acid Dental Etching Agent

Resin-bonded restorations are the most important caries treatment method in clinical practice. Thus, improving the durability of dentin bonding remains a pressing issue. As a promising solution, guided tissue remineralization can induce the formation of apatite nanocrystals to repair defects in the dentin bonding interface. In this study, we present an experimental 20 wt % citric acid (CA) dental etching agent that removes the smear layer. After CA-etching, approximately 3.55 wt % residual CA formed a strong bond with collagen fibrils, reducing the interfacial energy between the remineralizing solution and dentin. CA helped achieve almost complete intrafibrillar and extrafibrillar mineralization after 24 h of mineralization. CA also significantly promoted poly(amidoamine)-induced dentin biomimetic mineralization. The elastic modulus and microhardness of remineralized dentin were restored to that of sound dentin. The remineralized interface reduced microleakage and provided a stronger, longer-lasting bond than conventional phosphate acid-etching. The newly developed CA dental etching agents promoted rapid dentin biomimetic mineralization and improved bonding efficacy through interfacial control, representing a new approach with clinical practice implications.

Dentin Mechanobiology: Bridging the Gap between Architecture and Function

It is remarkable how teeth maintain their healthy condition under exceptionally high levels of mechanical loading. This suggests the presence of inherent mechanical adaptation mechanisms within their structure to counter constant stress. Dentin, situated between enamel and pulp, plays a crucial role in mechanically supporting tooth function. Its intermediate stiffness and viscoelastic properties, attributed to its mineralized, nanofibrous extracellular matrix, provide flexibility, strength, and rigidity, enabling it to withstand mechanical loading without fracturing. Moreover, dentin's unique architectural features, such as odontoblast processes within dentinal tubules and spatial compartmentalization between odontoblasts in dentin and sensory neurons in pulp, contribute to a distinctive sensory perception of external stimuli while acting as a defensive barrier for the dentin-pulp complex. Since dentin's architecture governs its functions in nociception and repair in response to mechanical stimuli, understanding dentin mechanobiology is crucial for developing treatments for pain management in dentin-associated diseases and dentin-pulp regeneration. This review discusses how dentin's physical features regulate mechano-sensing, focusing on mechano-sensitive ion channels. Additionally, we explore advanced in vitro platforms that mimic dentin's physical features, providing deeper insights into fundamental mechanobiological phenomena and laying the groundwork for effective mechano-therapeutic strategies for dentinal diseases.

Influence of Soft Stabilization Splint on Electromyographic Patterns in Masticatory and Neck Muscles in Healthy Women

This study investigates the influence of soft stabilization splints on electromyographic patterns in masticatory and neck muscles in healthy women. A total of 70 healthy women were qualified for the research. The resting and clenching electromyographic patterns of the temporalis (TA), masseter (MM), digastric (DA), and sternocleidomastoid (SCM) muscles were measured using the BioEMG III™ apparatus. The interaction between splint application and resting muscle activity affected the results in all examined muscles except the temporalis muscle. A large effect size was observed in masseter (2.19 µV vs. 5.18 µV; p = 0.00; ES = 1.00) and digastric (1.89 µV vs. 3.17 µV; p = 0.00; ES = 1.00) both-sided RMS activity. Significant differences between the two conditions were observed in all Functional Clenching Indices (FCI) for MM, SDM, and DA muscles. All FCI values for the MM and DA muscles were significantly lower with than without the splint. We observed an increase in all activity indices due to splint application, which suggests a masseter muscle advantage during measurement. The soft stabilization splint influenced resting and functional activity in the MM, SDM, and DA muscles. During tooth clenching, a soft stabilization splint changed the involvement proportions of the temporalis and masseter muscles, transferring the main activity to the masseter muscles. Using a soft stabilization splint did not affect the symmetry of the electromyographic activity of the masticatory and neck muscles.

Understanding the dynamics of fluid-structure interaction with an Air Deflected Microfluidic Chip (ADMC)

A deformable microfluidic system and a fluidic dynamic model have been successfully coupled to understand the dynamic fluid-structure interaction in transient flow, designed to understand the dentine hypersensitivity caused by hydrodynamic theory. The Polydimethylsiloxane thin sidewalls of the microfluidic chip are deformed with air pressure ranging from 50 to 500 mbar to move the liquid meniscus in the central liquid channel. The experiments show that the meniscus sharply increased in the first 10th of second and the increase is nonlinearly proportional to the applied pressure. A theoretical model is developed based on the unsteady Bernoulli equation and can well predict the ending point of the liquid displacement as well as the dynamics process, regardless of the wall thickness. Moreover, an overshooting and oscillation phenomenon is observed by reducing the head loss coefficient by a few orders which could be the key to explain the dentine hypersensitivity caused by the liquid movement in the dentine tubules.

Boundary conditions investigation to improve computer simulation of cerebrospinal fluid dynamics in hydrocephalus patients

Three-D head geometrical models of eight healthy subjects and 11 hydrocephalus patients were built using their CINE phase-contrast MRI data and used for computer simulations under three different inlet/outlet boundary conditions (BCs). The maximum cerebrospinal fluid (CSF) pressure and the ventricular system volume were more effective and accurate than the other parameters in evaluating the patients' conditions. In constant CSF pressure, the computational patient models were 18.5% more sensitive to CSF volume changes in the ventricular system under BC "C". Pulsatile CSF flow rate diagrams were used for inlet and outlet BCs of BC "C". BC "C" was suggested to evaluate the intracranial compliance of the hydrocephalus patients. The results suggested using the computational fluid dynamic (CFD) method and the fully coupled fluid-structure interaction (FSI) method for the CSF dynamic analysis in patients with external and internal hydrocephalus, respectively.

Correlation of a new hydrodynamic index with other effective indexes in Chiari I malformation patients with different associations

This study aimed to find a new CSF hydrodynamic index to assess Chiari type I malformation (CM-I) patients’ conditions and examine the relationship of this new index with morphometric and volumetric changes in these patients and their clinical symptoms. To this end, 58 CM-I patients in four groups and 20 healthy subjects underwent PC-MRI. Ten morphometric and three volumetric parameters were calculated. The CSF hydrodynamic parameters were also analyzed through computational fluid dynamic (CFD) simulation. The maximum CSF pressure was identified as a new hydrodynamic parameter to assess the CM-I patients’ conditions. This parameter was similar in patients with the same symptoms regardless of the group to which they belonged. The result showed a weak correlation between the maximum CSF pressure and the morphometric parameters in the patients. Among the volumetric parameters, PCF volume had the highest correlation with the maximum CSF pressure, which its value being higher in patients with CM-I/SM/scoliosis (R² = 65.6%, P = 0.0022) than in the other patients. PCF volume was the more relevant volumetric parameter to assess the patients’ symptoms. The values of PCF volume were greater in patients that headache symptom was more obvious than other symptoms, as compared to the other patients.

Effect of bifurcation in the hemodynamic changes and rupture risk of small intracranial aneurysm

The role of bifurcations is prominent in the intracranial aneurysm (IA) evaluation, and there are many contradictions and complexities in the rupture risk of small IA. Therefore, in the present study, the effect of bifurcation on the manner of hemodynamic changes and the rupture risk of the small middle cerebral artery (MCA) aneurysm is investigated. 3D anatomical models of the MCAs of 21 healthy subjects, 19 patients/IA/bifurcation, and 19 patients/IA were generated, and the models were analyzed by the computational fluid dynamic (CFD) analysis. The presence of bifurcation in the pathway of the blood flow in the parent artery of healthy subjects has reduced the maximum velocity, flow rate, and wall shear stress (WSS) by 25.8%, 38.6%, and 11.1%, respectively. The bifurcation decreased the maximum velocity and flow rate in the neck and sac of the aneurysm by 1.65~2.1 times, respectively. It increased the maximum WSS, and phase lag between the WSS graph of healthy subjects and patients by 12.8%~13.9% and 10.2%~40.4%, respectively. The effect of bifurcation on the Womersley number change in the aneurysm was insignificant, and the blood flow was in the laminar flow condition in all samples. The results also showed bifurcation increased the phase lag between the flow rate and pressure gradient graphs up to approximately 1.5 times. The rupture prediction index for patients/IA/bifurcation and patients/IA was 62.1%(CV = 4.1) and 51.8%(CV = 4.4), respectively. Thus, in equal conditions, the presence of bifurcation increased the probability of the rupture of the aneurysm by 19.9%.

The effect of electromagnetic field on decreasing and increasing of the growth and proliferation rate of dermal fibroblast cell

Maintaining the health of dermal fibroblast cells and controlling their growth and proliferation would directly affect the health of skin tissues. The present study encompassed three control and three experimental specimens, which were different in terms of the duration of exposure to electromagnetic field (EMF) and intensity. With a decrease in intensity from 2 to 1 mT during 24, 48, and 72 h after exposing the cells to EMF, the frequency of the sample fibroblast cells increased by 60.3%, 144.9%, and 90.1%, respectively. With an increase in intensity from 3 to 4 mT during 48 and 72 h of exposure to EMF, the frequencies of the sample fibroblast cells decreased by 6.8% and 86.7%, respectively. It seems to be possible to achieve the most desirable condition to help the restoration of wounds and skin lesions through decreasing the exposure intensity from 2 to 0.5 mT and increasing EMF exposure time from 24 to 72 h simultaneously and non-invasively. The most desirable approach to improve the treatment of skin cancers non-invasively is to increase the intensity from 3 to 5 mT and to enhance EMF exposure time from 48 to 72 h.

Effect of Ambient Temperature Changes on Blood Flow in Anterior Cerebral Artery of Patients with Skull Prosthesis

BACKGROUND

In many cases, an injury to the head leads to the replacement of a part of the skull with materials such as titanium and polyether ether ketone.

METHODS

Three-dimensional heads model of 15 healthy individuals and 13 patients were prepared. The models were simulated using thermal fluid structure interaction analysis to evaluate the effects of cold (5°C) and hot (55°C) temperatures of the skull on the conditions of blood flow in the anterior cerebral artery.

RESULTS

The results showed negligible changes (<3%) in wall shear stress (WSS) vessel and von Mises stress between the healthy individuals and patients both at 25°C and 55°C. However, at 5°C, the values of these 2 parameters in the patients were 2.1 and 2.5 times those in healthy individuals, respectively. The value of WSS in healthy individuals and the patients in cold temperature was 1.2 and 2.9 times those at normal temperature. The corresponding values for von Mises stress were 1.1 and 2.2, respectively. Accordingly, the stress changes between cold and hot ambient temperatures were found to be negligible in all samples.

CONCLUSIONS

The changes in stress were significant only for the patients when exposed to cold ambient temperature, and only in patients, exposure to a cold ambient temperature significantly increased the risks of vascular aneurysm and damage to the brain tissue surrounding the blood vessels. These risks were found to be negligible for both healthy individuals and patients when exposed to hot ambient temperature and also for healthy individuals exposed to cold ambient temperature.

Finite element analysis of occlusal splint therapy in patients with bruxism

Background

Bruxism is among the habits considered generally as contributory factors for temporomandibular joint (TMJ) disorders and its etiology is still controversial.

Methods

Three-dimensional models of maxilla and mandible and teeth of 37 patients and 36 control subjects were created using in-vivo image data. The maximum values of stress and deformation were calculated in 21 patients six months after using a splint and compared with those in the initial conditions.

Results

The maximum stresses in the jaw bone and head of mandible were respectively 4.4 and 4.1 times higher in patients than in control subjects. Similar values for deformation were 5.8 and 4.9, respectively. The maximum stress in the jaw bone and head of mandible decreased six months after splint application by up to 71.0 and 72.8%, respectively. Similar values for the maximum deformation were 80.7 and 78.7%, respectively. Following the occlusal splint therapy, the approximation of maximum deformation to the relevant values in control subjects was about 2.6 times the approximation of maximum stress to the relevant values in control subjects. The maximum stress and maximum deformation occurred in all cases in the head of the mandible and the splint had the highest effectiveness in jaw bone adjacent to the molar teeth.

Conclusions

Splint acts as a stress relaxer and dissipates the extra stresses generated as well as the TMJ deformation and deviations due to bruxism. The splint also makes the bilateral and simultaneous loading possible and helps with the treatment of this disorder through regulation of bruxism by creating a biomechanical equilibrium between the physiological loading and the generated stress.

Minimizing thermal damage to vascular nerves while drilling of calcified plaque

OBJECTIVE

Drilling of calcified plaque (DCP) inside the artery is a method for removing calcified plaques. This study investigated the effect of drill. To validate the maximum temperature calculated by computer simulation, this value was also measured by an experimental on a phantom model.

RESULTS

Increasing drill bit diameter during drilling would increase the temperature in vascular nerves. In a drill bit with a diameter of 4 mm, the risk of thermal necrosis in vascular nerves of the artery wall decreased by 8.57% by changing the drill from WC to NT. The same value for a drill bit with a diameter of 6 mm was 10.17%. However, the trend of the generated temperature in the vascular nerves did not change significantly with change of the material and diameter of the drill bit. The results showed that for DCP with the least risk of thermal necrosis in vascular nerves and subsequently the lowest risk of restenosis, coagulation and thermal stroke of the patient, the best option is to use a drill bit with a diameter of 4 mm and NT material for drilling.

The effect of spatial distances between holes and time delays between bone drillings based on examination of heat accumulation and risk of bone thermal necrosis

BACKGROUND AND OBJECTIVE

This study was designed to investigate heat accumulation and bone thermal necrosis for various distances between holes and time delays between drillings.

METHODS

The tests were performed at three distances (6, 12, 16 mm) and three time delays: 0, 5 and 10 s. To examine the efficiency of coolants, CO2 coolant was also tested in addition to two common cooling modes in bone drilling.

RESULTS

The main results were the trend of temperature-time graph, maximum temperature at drilling site, temperature distribution on the surface of drilling site, temperature durability and returning time. The effect of lateral drillings on the initial hole was notable in drilling at a distance of 6 mm without cooling. This effect did not disappear even by increasing the time delay up to 10 s. The results obtained for drilling with normal saline coolant were not sufficiently acceptable due to the manual and non-uniform cooling process as well as the relative obstruction of the chips exit path. Generally, drillings with two common cooling modes, even when the distances between holes and time delays between drillings were controlled, did not yield all favorable conditions for preventing bone thermal necrosis.

CONCLUSION

Bone drilling using CO2 coolant eliminates the risk of bone thermal necrosis completely even in cases that the distances between holes in plates or implants are 6 mm and there is no time delay between drillings. These results can be especially useful in emergency orthopedic surgeries and for designing the location of screw holes in implants and plates.