GAG content, fiber stiffness, and fiber angle affect swelling-based residual stress in the intact annulus fibrosus

The effects of viscoelasticity on residual strain in aortic soft tissues

Residual stress is thought to play a critical role in modulating stress distributions in soft biological tissues and in maintaining the mechanobiological stress environment of cells. Residual stresses in arteries and other tissues are classically assessed through opening angle experiments, which demonstrate the continuous release of residual stresses over hours. These results are then assessed through nonlinear biomechanical models to provide estimates of the residual stresses in the intact state. Although well studied, these analyses typically focus on hyperelastic material models despite significant evidence of viscoelastic phenomena over both short and long timescales. In this work, we extended the state-of-the-art structural tensor model for arterial tissues from Holzapfel and Ogden for fractional viscoelasticity. Models were tuned to capture consistent levels of hysteresis observed in biaxial experiments, while also minimizing the fractional viscoelastic weighting and opening angles to correctly capture opening angle dynamics. Results suggest that a substantial portion of the human abdominal aorta is viscoelastic, but exhibits a low fractional order (i.e. more elastically). Additionally, a significantly larger opening angle in the fully unloaded state is necessary to produce comparable hysteresis in biaxial testing. As a consequence, conventional estimates of residual stress using hyperelastic approaches over-estimate their viscoelastic counterparts by a factor of 2. Thus, a viscoelastic approach, such as the one illustrated in this study, in combination with an additional source of rate-controlled viscoelastic data is necessary to accurately analyze the residual stress distribution in soft biological tissues. STATEMENT OF SIGNIFICANCE: Residual stress plays a crucial role in achieving a homeostatic stress environment in soft biological tissues. However, the analysis of residual stress typically focuses on hyperelastic material models despite evidence of viscoelastic behavior. This work is the first attempt at analyzing the effects of viscoelasticity on residual stress. The application of viscoelasticity was crucial for producing realistic opening dynamics in arteries. The overall residual stresses were estimated to be 50% less than those from using hyperelastic material models, while the opening angles were projected to be 25% more than those measured after 16 hours, suggesting underestimated residual strain. This study highlights the importance viscoelasticity in the analysis of residual stress even in weakly dissipative materials like the human aorta.

Residual stress and osmotic swelling of the periodontal ligament

Osmotic swelling and residual stress are increasingly recognized as important factors in soft tissue biomechanics. Little attention has been given to residual stress in periodontal ligament (PDL) biomechanics despite its rapid growth and remodeling potential. Those tissues that bear compressive loads, e.g., articular cartilage, intervertebral disk, have received much attention related to their capacities for osmotic swelling. To understand residual stress and osmotic swelling in the PDL, it must be asked (1) to what extent, if any, does the PDL exhibit residual stress and osmotic swelling, and (2) if so, whether residual stress and osmotic swelling are mechanically significant to the PDL's stress/strain behavior under external loading. Here, we incrementally built a series of computer models that were fit to uniaxial loading, osmotic swelling and residual stretch data. The models were validated with in vitro shear tests and in vivo tooth-tipping data. Residual stress and osmotic swelling models were used to analyze tension and compression stress (principal stress) effects in PDL specimens under external loads. Shear-to-failure experiments under osmotic conditions were performed and modeled to determine differences in mechanics and failure of swollen periodontal ligament. Significantly higher failure shear stresses in swollen PDL suggested that osmotic swelling reduced tension and thus had a strengthening effect. The in vivo model's first and third principal stresses were both higher with residual stress and osmotic swelling, but smooth stress gradients prevailed throughout the three-dimensional PDL anatomy. The addition of PDL stresses from residual stress and osmotic swelling represents a unique concept in dental biomechanics.

Sensitivity of Intervertebral Disc Finite Element Models to Internal Geometric and Non-geometric Parameters

Finite element models are useful for investigating internal intervertebral disc (IVD) behaviours without using disruptive experimental techniques. Simplified geometries are commonly used to reduce computational time or because internal geometries cannot be acquired from CT scans. This study aimed to (1) investigate the effect of altered geometries both at endplates and the nucleus-anulus boundary on model response, and (2) to investigate model sensitivity to material and geometric inputs, and different modelling approaches (graduated or consistent fibre bundle angles and glued or cohesive inter-lamellar contact). Six models were developed from 9.4 T MRIs of bovine IVDs. Models had two variations of endplate geometry (a simple curved profile from the centre of the disc to the periphery, and precise geometry segmented from MRIs), and three variations of NP-AF boundary (linear, curved, and segmented). Models were subjected to axial compressive loading (to 0.86 mm at a strain rate of 0.1/s) and the effect on stiffness and strain distributions, and the sensitivity to modelling approaches was investigated. The model with the most complex geometry (segmented endplates, curved NP-AF boundary) was 3.1 times stiffer than the model with the simplest geometry (curved endplates, linear NP-AF boundary), although this difference may be exaggerated since segmenting the endplates in the complex geometry models resulted in a shorter average disc height. Peak strains were close to the endplates at locations of high curvature in the segmented endplate models which were not captured in the curved endplate models. Differences were also seen in sensitivity to material properties, graduated fibre angles, cohesive rather than glued inter-lamellar contact, and NP:AF ratios. These results show that FE modellers must take care to ensure geometries are realistic so that load is distributed and passes through IVDs accurately.

A growth-based model for the prediction of fiber angle distribution in the intervertebral disc annulus fibrosus

There is a growing interest in the development of patient-specific finite element models of the human lumbar spine for both the assessment of injury risk and the development of treatment strategies. A current challenge in implementing these models is that the outer annulus fibrosus of the disc is composed of concentric sheets of aligned collagen fibers, the helical angles of which vary spatially. In finite element models, fiber angle is typically assumed to be constant, based on average experimental measurements from a small number of locations. The present study hypothesized that the full spatial distribution of fiber angles in the annulus fibrosus may be predicted for any disc geometry by assuming growth from a thin cylinder with constant fiber angle. This hypothesis was tested by developing an analytical model of disc growth and calibrating it with fiber angle measurements of adult bovine caudal discs. The calibrated model was then run on a representative human lumbar disc geometry. The model was able to accurately predict fiber angle distributions in both the experimental bovine caudal disc measurements and literature-reported human lumbar disc measurements. Despite its theoretical basis in development, the model requires only mature state geometry, making it practical for implementation in patient-specific finite element analyses, in which disc geometry is obtained from clinical imaging.