Spatiotemporal remodeling of embryonic aortic arch: stress distribution, microstructure, and vascular growth in silico

Embryonic aortic arch material properties obtained by optical coherence tomography-guided micropipette aspiration

It is challenging to determine the in vivo material properties of a very soft, mesoscale arterial vesselsof size ∼ 80 to 120 μm diameter. This information is essential to understand the early embryonic cardiovascular development featuring rapidly evolving dynamic microstructure. Previous research efforts to describe the properties of the embryonic great vessels are very limited. Our objective is to measure the local material properties of pharyngeal aortic arch tissue of the chick-embryo during the early Hamburger-Hamilton (HH) stages, HH18 and HH24. Integrating the micropipette aspiration technique with optical coherence tomography (OCT) imaging, a clear vision of the aspirated arch geometry is achieved for an inner pipette radius of Rp = 25 μm. The aspiration of this region is performed through a calibrated negatively pressurized micro-pipette. A computational finite element model is developed to model the nonlinear behaviour of the arch structure by considering the geometry-dependent constraints. Numerical estimations of the nonlinear material parameters for aortic arch samples are presented. The exponential material nonlinearity parameter (a) of aortic arch tissue increases statistically significantly from a = 0.068 ± 0.013 at HH18 to a = 0.260 ± 0.014 at HH24 (p = 0.0286). As such, the aspirated tissue length decreases from 53 μm at HH18 to 34 μm at HH24. The calculated NeoHookean shear modulus increases from 51 Pa at HH18 to 93 Pa at HH24 which indicates a statistically significant stiffness increase. These changes are due to the dynamic changes of collagen and elastin content in the media layer of the vessel during development.

Soft-Tissue Material Properties and Mechanogenetics during Cardiovascular Development

During embryonic development, changes in the cardiovascular microstructure and material properties are essential for an integrated biomechanical understanding. This knowledge also enables realistic predictive computational tools, specifically targeting the formation of congenital heart defects. Material characterization of cardiovascular embryonic tissue at consequent embryonic stages is critical to understand growth, remodeling, and hemodynamic functions. Two biomechanical loading modes, which are wall shear stress and blood pressure, are associated with distinct molecular pathways and govern vascular morphology through microstructural remodeling. Dynamic embryonic tissues have complex signaling networks integrated with mechanical factors such as stress, strain, and stiffness. While the multiscale interplay between the mechanical loading modes and microstructural changes has been studied in animal models, mechanical characterization of early embryonic cardiovascular tissue is challenging due to the miniature sample sizes and active/passive vascular components. Accordingly, this comparative review focuses on the embryonic material characterization of developing cardiovascular systems and attempts to classify it for different species and embryonic timepoints. Key cardiovascular components including the great vessels, ventricles, heart valves, and the umbilical cord arteries are covered. A state-of-the-art review of experimental techniques for embryonic material characterization is provided along with the two novel methods developed to measure the residual and von Mises stress distributions in avian embryonic vessels noninvasively, for the first time in the literature. As attempted in this review, the compilation of embryonic mechanical properties will also contribute to our understanding of the mature cardiovascular system and possibly lead to new microstructural and genetic interventions to correct abnormal development.

Fetal Blood Flow and Genetic Mutations in Conotruncal Congenital Heart Disease

In congenital heart disease, the presence of structural defects affects blood flow in the heart and circulation. However, because the fetal circulation bypasses the lungs, fetuses with cyanotic heart defects can survive in utero but need prompt intervention to survive after birth. Tetralogy of Fallot and persistent truncus arteriosus are two of the most significant conotruncal heart defects. In both defects, blood access to the lungs is restricted or non-existent, and babies with these critical conditions need intervention right after birth. While there are known genetic mutations that lead to these critical heart defects, early perturbations in blood flow can independently lead to critical heart defects. In this paper, we start by comparing the fetal circulation with the neonatal and adult circulation, and reviewing how altered fetal blood flow can be used as a diagnostic tool to plan interventions. We then look at known factors that lead to tetralogy of Fallot and persistent truncus arteriosus: namely early perturbations in blood flow and mutations within VEGF-related pathways. The interplay between physical and genetic factors means that any one alteration can cause significant disruptions during development and underscore our need to better understand the effects of both blood flow and flow-responsive genes.

Computational Modeling of Blood Flow Hemodynamics for Biomechanical Investigation of Cardiac Development and Disease

The heart is the first functional organ in a developing embryo. Cardiac development continues throughout developmental stages while the heart goes through a serious of drastic morphological changes. Previous animal experiments as well as clinical observations showed that disturbed hemodynamics interfere with the development of the heart and leads to the formation of a variety of defects in heart valves, heart chambers, and blood vessels, suggesting that hemodynamics is a governing factor for cardiogenesis, and disturbed hemodynamics is an important source of congenital heart defects. Therefore, there is an interest to image and quantify the flowing blood through a developing heart. Flow measurement in embryonic fetal heart can be performed using advanced techniques such as magnetic resonance imaging (MRI) or echocardiography. Computational fluid dynamics (CFD) modeling is another approach especially useful when the other imaging modalities are not available and in-depth flow assessment is needed. The approach is based on numerically solving relevant physical equations to approximate the flow hemodynamics and tissue behavior. This approach is becoming widely adapted to simulate cardiac flows during the embryonic development. While there are few studies for human fetal cardiac flows, many groups used zebrafish and chicken embryos as useful models for elucidating normal and diseased cardiogenesis. In this paper, we explain the major steps to generate CFD models for simulating cardiac hemodynamics in vivo and summarize the latest findings on chicken and zebrafish embryos as well as human fetal hearts.

Computational modeling of vascular growth in patient-specific pulmonary arterial patch reconstructions

Recent progress in vascular growth mechanics has involved the use of computational algorithms to address clinical problems with the use of three-dimensional patient specific geometries. The objective of this study is to establish a predictive computational model for the volumetric growth of pulmonary arterial (PA) tissue following complex cardiovascular patch reconstructive surgeries for congenital heart disease patients. For the first time in the literature, the growth mechanics and performance of artificial cardiovascular patches in contact with the growing PA tissue domain is established. An elastic-growing material model was developed in the open source FEBio software suite to first examine the surgical patch reconstruction process for an idealized main PA anatomy as a benchmark model and then for the patient-specific PA of a newborn. Following patch reconstruction, high levels of stress and strain are compensated by growth on the arterial tissue. As this growth progresses, the arterial tissue is predicted to stiffen to limit elastic deformations. We simulated this arterial growth up to the age of 18 years, when somatic growth plateaus. Our research findings show that the non-growing patch material remains in a low strain state throughout the simulation timeline, while experiencing high stress hot-spots. Arterial tissue growth along the surgical stitch lines is triggered mainly due to PA geometry and blood pressure, rather than due to material property differences in the artificial and native tissue. Thus, non-uniform growth patterns are observed along the arterial tissue proximal to the sutured boundaries. This computational approach is effective for the pre-surgical planning of complex patch surgeries to quantify the unbalanced growth of native arteries and artificial non-growing materials to develop optimal patch biomechanics for improved postoperative outcomes.

Microstructure of early embryonic aortic arch and its reversibility following mechanically altered hemodynamic load release

In the embryonic heart, blood flow is distributed through a bilaterally paired artery system composed of the aortic arches (AAs). The purpose of this study is to establish an understanding of the governing mechanism of microstructural maturation of the AA matrix and its reversibility, toward the desired macroscopic vessel lumen diameter and thickness for healthy, abnormal, and in ovo repaired abnormal mechanical loading. While matrix-remodeling mechanisms were significantly different for normal versus conotruncal banding (CTB), both led to an increase in vessel lumen. Correlated with right-sided flow increase at Hamburger & Hamilton stages 21, intermittent load switching between collagen I and III with elastin and collagen-IV defines the normal process. However, decreases in collagen I, elastin, vascular endothelial growth factor-A, and fibrillin-1 in CTB were recovered almost fully following the CTB-release model, primarily because of the pressure load changes. The complex temporal changes in matrix proteins are illustrated through a predictive finite-element model based on elastin and collagen load-sharing mechanism to achieve lumen area increase and thickness increase resulting from wall shear stress and tissue strain, respectively. The effect of embryonic timing in cardiac interventions on AA microstructure was established where abnormal mechanical loading was selectively restored at the key stage of development. Recovery of the normal mechanical loading via early fetal intervention resulted in delayed microstructural maturation. Temporal elastin increase, correlated with wall shear stress, is required for continuous lumen area growth.NEW & NOTEWORTHY The present study undertakes comparative analyses of the mechanistic differences of the arterial matrix microstructure and dynamics in the three fundamental processes of control, conotruncal banded, and released conotruncal band in avian embryo. Among other findings, this study provides specific evidence on the restorative role of elastin during the early lumen growth process. During vascular development, a novel intermittent load-switching mechanism between elastin and collagen, triggered by a step increase in wall shear stress, governs the chronic vessel lumen cross-sectional area increase. Mimicking the fetal cardiovascular interventions currently performed in humans, the early release of the abnormal mechanical load rescues the arterial microstructure with time lag.