Influence of porcine-derived collagen matrix on endothelial progenitor cells: an in vitro study

Novel Technique to Reconstruct Peri-Implant Keratinised Mucosa Width Using Xenogeneic Dermal Matrix. Clinical Case Series

Reconstruction of sufficient buccal peri-implant keratinised mucosa width (PIKM-W) is reported to reduce the symptoms of peri-implantitis. In order to reduce the drawbacks of autogenous graft harvesting, we investigated a novel porcine dermal matrix (XDM, mucoderm®) using a modified surgical technique for augmentation of PIKM-W. Twenty-four patients were recruited with insufficient (<2 mm) PIKM-W. After split thickness flap preparation, the XDM was trimmed, rehydrated and tightly attached to the recipient periosteal bed using modified internal/external horizontal periosteal mattress sutures via secondary wound healing. Change of the PIKM-W and dimension of the graft remodelling were evaluated at 6 and 12 months postoperatively. The mean PIKM-W changed from 0.42 ± 0.47 to 3.17 ± 1.21 mm at 6 M and to 2.36 ± 1.34 mm at 12 M in the maxilla and from 0.29 ± 0.45 mm to 1.58 ± 1.44 mm at 6 M and to 1.08 ± 1.07 mm at 12 M in the mandible. Graft dimensions decreased by 67.7 ± 11.8% and 81.6 ± 16.6% at 6 M, and continued to 75.9 ± 13.9% and 87.4 ± 12.3% at 12 M, in the maxilla and mandible, respectively. Clinical parameters showed statistically significant intra- and intergroup differences between the baseline and 6 and 12 months (p < 0.05). The present technique using the XDM was safe and successfully reconstructed PIKM-W in both arches. The XDM alone seems to be a suitable alternative to autograft for PIKM-W augmentation in the maxilla.

Cell-loaded genipin cross-linked collagen/gelatin skin substitute adorned with zinc-doped bioactive glass-ceramic for cutaneous wound regeneration

An optimal tissue-engineered dermal substitute should possess biocompatibility and cell adhesion conduction to facilitate fibroblast and keratinocyte infiltration and proliferation, as well as angiogenesis potential to escalate wound healing. Zinc was doped to bioactive glass-ceramic (Zn-BGC) to promote biocompatibility and angiogenesis properties. Zn-BGC was then incorporated into a collagen (Col) and gelatin (Gel) porous scaffold. The bioactive porous bionanocomposite exhibited biocompatibility along with improved cell attachment and proliferation. Scaffolds including Col-Gel/Zn-BGC with or without mouse embryonic fibroblasts were applied on full-thickness skin wounds on the BALB/c mice to assess their wound healing potential in vivo. The results indicated that the biodegradation rate of the Col-Gel/Zn-BGC nanocomposites was comparable to the rate of skin tissue regeneration in vivo. Macroscopic wound healing results showed that Col-Gel/Zn-BGC loaded with mouse embryonic fibroblast possesses the smallest wound size, indicating the fastest healing process. Histopathological evaluations displayed that the optimal wound regeneration was observed in Col-Gel/Zn-BGC nanocomposites loaded with mouse embryonic fibroblasts indicated by epithelialization and angiogenesis; besides the number of fibroblasts and hair follicles was increased. The bioactive nanocomposite scaffold of Col-Gel containing Zn-BGC nanoparticles loaded with mouse embryonic fibroblasts can be employed as a desirable skin substitute to ameliorate cutaneous wound regeneration.

Acceleration of chronic wound healing by bio-inorganic polyphosphate: In vitro studies and first clinical applications

The healing of chronic wounds is impaired by a lack of metabolic energy. In previous studies, we showed that physiological inorganic polyphosphate (polyP) is a generator of metabolic energy by forming ATP as a result of the enzymatic cleavage of the high-energy phosphoanhydride bonds of this polymer. Therefore, in the present study, we investigated whether the administration of polyP can substitute for the energy deficiency in chronic wound healing. Methods: PolyP was incorporated into collagen mats and applied in vitro and to patients in vivo. Results: (i) In vitro studies: Keratinocytes grown in vitro onto the polyP/collagen mats formed long microvilli to guide them to a favorable environment. HUVEC cells responded to polyP/collagen mats with an increased adhesion and migration propensity as well as penetration into the mats. (ii) In vivo - human clinical studies: In a "bench to bedside" process these promising in vitro results were translated from the laboratory into the clinic. In the proof-of-concept application, the engineered polyP/collagen mats were applied to chronic wounds in patients. Those mats impressively accelerated the re-epithelialization rate, with a reduction of the wound area to 65% after 3 weeks and to 36.6% and 22.5% after 6 and 9 weeks, respectively. Complete healing was achieved and no further treatment was necessary. Biopsy samples from the regenerating wound area showed predominantly myofibroblasts. The wound healing process was supported by the use of a polyP containing moisturizing solution. Conclusion: The results strongly recommend polyP as a beneficial component in mats for a substantial healing of chronic wounds.

Porcine Acellular Dermal Matrix: An Alternative to Connective Tissue Graft-A Narrative Review

Porcine acellular dermal matrix has recently been introduced in dentistry as an alternative to the gold standard connective tissue graft especially for the use in gingival recession treatments and soft tissue augmentation in implant surgery. Connective tissue grafts are inconvenient and require a second surgical site leading to greater morbidity, longer surgical procedures, and a more painful postoperative phase for the patient. Other options such as allografts have ethical concerns and are less available in Europe. Thus, dental professionals have sought other techniques and materials. Porcine acellular dermal matrix results in periodontal recession treatment with a gain in recession coverage as well as increased keratinized tissue and soft tissue augmentation. This leads to more keratinized mucosa and greater tissue thickness. Many studies have been published using collagen matrices, but a few strictly use porcine acellular dermal matrix, which have been studied in prospective randomized clinical trials with a large number of patients and longer follow-up periods (more than 5 years). Nevertheless, more data are needed to confirm that the porcine acellular dermal matrix is a suitable alternative although its favourable results to date suggest a positive future.

In Vitro Biodegradation Pattern of Collagen Matrices for Soft Tissue Augmentation

Collagen matrices have become a great alternative to the use of connective tissue grafts for soft tissue augmentation procedures. One of the main problems with these matrices is their volume instability and rapid degradation. This study has been designed with the objective of examining the degradation of three matrices over time. For this purpose, pieces of 10 × 10 mm² of Fibro-Gide, Mucograft and Mucoderm were submitted to three different degradation tests-(1) hydrolytic degradation in phosphate buffer solution (PBS); (2) enzyme resistance, using a 0.25% porcine trypsin solution; and (3) bacterial collagenase resistance (Clostridium histolyticum)-over different immersion periods of up to 50 days. Weight measurements were performed with an analytic microbalance. Thickness was measured with a digital caliper. A stereomicroscope was used to obtain the matrices' images. ANOVA and Student-Newman-Keuls tests were used for mean comparisons (p < 0.05), except when analyzing differences between time-points within the same matrix and solution, where pair-wise comparisons were applied (p < 0.001). Fibro-Gide attained the highest resistance to all degradation challenges. The bacterial collagenase solution was shown to constitute the most aggressive test as all matrices presented 100% degradation before 14 days of storage.

Preparation and Characterization of Antibacterial Porcine Acellular Dermal Matrices with High Performance

Infection is a common complication in the process of wound management. An ideal wound dressing is supposed to reduce or even prevent the infection while promoting wound healing. A porcine acellular dermal matrix (pADM) has been already used as a wound dressing in clinic due to its capacity to accelerate wound healing. However, not only is pure pADM not antibacterial, its mechanical properties are poor. In this study, an antibacterial pADM with good performance was prepared by adding two natural products as modifiers, quercetin (QCT) and tea tree oil (TTO). The result of Fourier-transform infrared (FTIR) proved that the addition of modifiers did not break the natural triple-helical structure of collagen. Meanwhile, the results of differential scanning calorimetry (DSC), thermogravimetric analysis (TG), mechanic experiment, and enzymatic degradation demonstrated that pADM handled with QCT and TTO (termed QCT-TTO-pADM) had better thermal stability, mechanical strength, and resistance to enzymatic degradation than pADM. Meanwhile, QCT-TTO-pADM had excellent antibacterial activity and showed an antibacterial rate of over 80%. Furthermore, in the cytocompatibility analysis, QCT-TTO-pADM had no side effects on the adhesion, growth, and proliferation of fibroblasts. QCT-TTO-pADM could even accelerate wound healing more efficiently than pADM and glutaraldehyde-modified pADM (GA-pADM). In conclusion, QCT-TTO-pADM was a potential antibacterial wound dressing with good performance.

A 3-Year Prospective Study on a Porcine-Derived Acellular Collagen Matrix to Re-Establish Convexity at the Buccal Aspect of Single Implants in the Molar Area: A Volumetric Analysis

Background: Xenogeneic soft tissue substitutes are currently being investigated as an alternative to subepithelial connective tissue grafts (CTG) with the intention to avoid postoperative morbidity associated with autologous grafting. The aim of the present study was to volumetrically evaluate the effectiveness and mid-long-term stability of a porcine-derived collagen matrix (PDCM) (Mucoderm^®, Botiss gmbh, Berlin, Germany) in increasing soft tissue volume at the buccal aspect of molar implant sites. Methods: Periodontally healthy non-smoking patients with a single tooth gap in the molar area were selected for a prospective case series. All sites had a bucco-oral bone dimension of at least 8 mm and demonstrated a horizontal alveolar defect. A wide diameter implant was placed under the elevated buccal flap and a PDCM was applied. The primary outcome was the linear increase in buccal soft tissue profile (BSP) within a well-defined area of interest. This was performed with designated software (SMOP; Swissmeda AG, Zurich, Switzerland) on the basis of superimposed digitalized study casts taken before surgery (T0), immediately after surgery (T1), at three months (T2), one year (T3) and three years (T4). Secondary outcomes were alveolar process deficiency and clinical parameters. Results: Fourteen out of 15 treated patients attended the three-year re-assessment (four females; mean age 51.4 years). Mean linear increase in BSP at T1 was 1.53 mm (p = 0.001). The PDCM showed substantial resorption at T2 (1.02 mm or 66.7%) (p = 0.001). Thereafter, a 0.66 mm volume gain was observed (p = 0.030), possibly due to the installation of a permanent crown displacing the soft tissues to the buccal aspect. This resulted in a linear increase in BSP of 1.17 mm (76.5%) at T4. Alveolar process deficiency significantly reduced over time (p = 0.004). However, 50% of patients still demonstrated a slight (6/14) or obvious (1/14) alveolar process deficiency at study termination. Implants demonstrated healthy clinical conditions. Conclusions: The PDCM demonstrated marked resorption during the early stages of healing. Due to the matrix thickening the tissues, and the permanent crown displacing the tissues, 76.5% of the initial increase in BSP could be maintained over a three-year period. Half of the patients failed to show perfect soft tissue convexity at the buccal aspect.

Biofunctionalization of porcine-derived collagen matrices with platelet rich fibrin: influence on angiogenesis in vitro and in vivo

Objectives

Porcine-derived collagen matrices (CM) can be used for oral tissue regeneration, but sufficient revascularization is crucial. The aim of this study was to analyze the influence of platelet-rich fibrin (PRF) on angiogenesis of different CM in vitro and in vivo.

Materials and methods

Three different CM (mucoderm, jason, collprotect) were combined with PRF in a plotting process. Growth factor release (VEGF, TGF-β) was measured in vitro via ELISA quantification after 1,4 and 7 days in comparison to PRF alone. In ovo yolk sac (YSM) and chorion allantois membrane (CAM) model, angiogenic potential were analyzed in vivo with light- and intravital fluorescence microscopy after 24 h, then verified with immunohistochemical staining for CD105 and αSMA.

Results

Highest growth factor release was seen after 24 h for all three activated membranes in comparison to the native CM (VEGF 24 h: each p < 0.05; TGF-β: each p < 0.001) and the PRF (no significant difference). All activated membranes revealed a significantly increased angiogenic potential in vivo after 24 h (vessels per mm2: each p < 0.05; branching points per mm2: each p < 0.01; vessel density: each p < 0.05) and with immunohistochemical staining for CD105 (each p < 0.01) and αSMA (each p < 0.05).

Conclusions

PRF improved the angiogenesis of CM in vitro and in vivo.

Clinical relevance

Bio-functionalization of CM with PRF could easily implemented in the clinical pathway and may lead to advanced soft tissue healing.

An introduction to bone tissue engineering

Bone tissue has the capability to regenerate itself; however, defects of a critical size prevent the bone from regenerating and require additional support. To aid regeneration, bone scaffolds created out of autologous or allograft bone can be used, yet these produce problems such as fast degradation rates, reduced bioactivity, donor site morbidity or the risk of pathogen transmission. The development of bone tissue engineering has been used to create functional alternatives to regenerate bone. This can be achieved by producing bone tissue scaffolds that induce osteoconduction and integration, provide mechanical stability, and either integrate into the bone structure or degrade and are excreted by the body. A range of different biomaterials have been used to this end, each with their own advantages and disadvantages. This review will introduce the requirements of bone tissue engineering, beginning with the regeneration process of bone before exploring the requirements of bone tissue scaffolds. Aspects covered include the manufacturing process as well as the different materials used and the incorporation of bioactive molecules, growth factors and cells.

The Use of a Novel Porcine Derived Acellular Dermal Matrix (Mucoderm) in Peri-Implant Soft Tissue Augmentation: Preliminary Results of a Prospective Pilot Cohort Study

Objective

Over the years, several techniques have been proposed for soft tissue augmentation around dental implants in order to improve keratinized mucosa width (KMW). Recently, a porcine derived acellular dermal matrix (Mucoderm®) has been proposed as autogenous graft substitute in order to avoid palatal harvesting and obtain comparable results to connective tissue grafts, in terms of aesthetics and function. The aim of this study is to present the one-year follow-up results of this matrix in peri-implant soft tissue augmentation procedures.

Material and Methods

Twelve patients were enrolled in this pilot prospective study: a dental implant was placed in the upper premolar area and, at implant uncovering after eight weeks, the matrix was inserted. KMW gain was considered as primary outcome variable.

Results

After one month from matrix insertion, mean KMW was 7.86±3.22 mm (100%), with no statistically significant intragroup variations (p>0.05). No membrane exposures or wound healing complications occurred during postoperative phase and, after one year, mean KMW was 5.67±2.12 mm (72.13%).

Conclusions

The results of the present pilot study indicate that by placing a Mucoderm membrane during implant surgery the keratinized tissue width can be augmented, and the width remains stable for the assessment period of 12 months. Further studies with greater power and longer investigation period are needed to confirm the suggestion for clinical use. Clinical trial registration number is EudraCT number 2018-000147-16.

Treatment of multiple maxillary adjacent class I and II gingival recessions with modified coronally advanced tunnel and a new xenogeneic acellular dermal matrix

OBJECTIVE

To evaluate the treatment of maxillary Miller Class I and II multiple adjacent gingival recessions using the modified coronally advanced tunnel technique (MCAT) combined with a new porcine acellular dermal matrix (PADM).

MATERIALS AND METHODS

Twelve patients exhibiting at least six adjacent maxillary Miller Class I and II gingival recessions were consecutively treated by means of MCAT and a PADM. Recession depth (RD), recession width (RW), probing pocket depth (PD), keratinized tissue height (KT), clinical attachment level (CAL), mean root coverage (RC), and complete root coverage (CRC) were recorded.

RESULTS

At 12 months, CRC was obtained in 43% of the 100 gingival recessions, while the mean RC measured 84.35%. Mean RD reduction was 3.16 ± 0.75 mm (P < 0.001), mean RW reduction was 1.73 ± 0.65 mm (P < 0.001), while the gain of CAL was 3.26 ± 1.33 mm (P < 0.001). All patients were satisfied with the esthetic appearance and would undergo the same surgery again.

CONCLUSION

Within their limits, the present results indicate that treatment of Miller Class I and II multiple gingival recessions using PADM in conjunction with the MCAT could be successfully used as an alternative to connective tissue grafts, with the advantage of avoiding the discomfort and morbidity of connective tissue harvesting.

CLINICAL SIGNIFICANCE

The modified coronally advanced tunnel technique using the new porcine acellular dermal matrix represents a clinically and esthetically satisfactory treatment of multiple Miller Class 1 and 2 recession defects.

Electrospun tilapia collagen nanofibers accelerating wound healing via inducing keratinocytes proliferation and differentiation

The development of biomaterials with the ability to induce skin wound healing is a great challenge in biomedicine. In this study, tilapia skin collagen sponge and electrospun nanofibers were developed for wound dressing. The collagen sponge was composed of at least two α-peptides. It did not change the number of spleen-derived lymphocytes in BALB/c mice, the ratio of CD4(+)/CD8(+) lymphocytes, and the level of IgG or IgM in Sprague-Dawley rats. The tensile strength and contact angle of collagen nanofibers were 6.72±0.44MPa and 26.71±4.88°, respectively. They also had good thermal stability and swelling property. Furthermore, the nanofibers could significantly promote the proliferation of human keratinocytes (HaCaTs) and stimulate epidermal differentiation through the up-regulated gene expression of involucrin, filaggrin, and type I transglutaminase in HaCaTs. The collagen nanofibers could also facilitate rat skin regeneration. In the present study, electrospun biomimetic tilapia skin collagen nanofibers were succesfully prepared, were proved to have good bioactivity and could accelerate rat wound healing rapidly and effectively. These biological effects might be attributed to the biomimic extracellular matrix structure and the multiple amino acids of the collagen nanofibers. Therefore, the cost-efficient tilapia collagen nanofibers could be used as novel wound dressing, meanwhile effectively avoiding the risk of transmitting animal disease in the future clinical apllication.

Healing of localized gingival recessions treated with a coronally advanced flap alone or combined with an enamel matrix derivative and a porcine acellular dermal matrix: a preclinical study

OBJECTIVE

This study aimed to evaluate the effects of a porcine acellular dermal matrix (PADM) with or without an enamel matrix derivative (EMD) on gingival recession defects treated with a coronally advanced flap (CAF) in dogs.

MATERIALS AND METHODS

Miller class II gingival recession defects (5 mm wide and 7 mm deep) were surgically created on the labial side of bilateral maxillary canines in 12 dogs. After 8 weeks of plaque accumulation, the 24 chronic defects were randomly assigned to one of the following 4 treatments: CAF, CAF with PADM (CAF/PADM), CAF with EMD (CAF/EMD), and CAF with EMD and PADM (CAF/EMD/PADM). The animals were sacrificed 10 weeks after surgery for histologic evaluation.

RESULTS

In all groups, root coverage was obtained to a varying degree. PADM was well incorporated in gingival connective tissue in the CAF/PADM and in the CAF/EMD/PADM groups. The height of newly formed bone was significantly greater in the CAF/EMD/PADM group than in the CAF and CAF/PADM groups. New cementum with periodontal ligament-like tissue was predominantly found in the CAF/EMD and CAF/EMD/PADM groups. The CAF/EMD/PADM group showed the greatest amount of new cementum among the groups examined, although the difference was not statistically significant.

CONCLUSION

Within the limitations of the present study, it can be concluded that CAF/EMD/PADM treatment may promote periodontal regeneration in gingival recession defects.

CLINICAL RELEVANCE

The present results suggest that the combination of EMD and PADM in conjunction with CAF may represent a promising approach for treating single Miller class II gingival recessions.