Influence of amino nitrogen in the culture medium enhances the production of δ-endotoxin and biomass of Bacillus thuringiensis var. israelensis for the large-scale production of the mosquito control agent

Effect of four trace elements on Paenibacillus polymyxa Pp-7250 proliferation, activity and colonization in ginseng

Trace elements are essential nutrients for the growth of microorganisms and play an important role in their proliferation. Hence, the purpose of this paper is to explore the optimal C and N sources for large-scale culture of Paenibacillus polymyxa, and to screen trace elements that can promote their proliferation and improve the activity. First, the concentration of Paenibacillus polymyxa Pp-7250, the number of spores were used as evaluation index. It was found that the four trace elements Cu2+, Fe2+, Mn2+, and Zn2+ could promote the proliferation of Paenibacillus polymyxa at their optimal concentrations. Next, when using wheat starch as carbon source and soybean meal as nitrogen source, it was most suitable for large-scale culture. Finally, field experiments were carried out, and it was discovered that the combination of four trace elements plus the wheat soybean meal group could significantly improve the disease prevention, growth promotion ability of Pp-7250 and its colonization in ginseng. Moreover, the ability of Pp-7250 to transform ginseng roots and leaf saponins were also significantly improved. The group also affected the rhizosphere bacterial community of ginseng and the number showed a significant promotion or inhibition.

Improvement of delta-endotoxin production from local Bacillus thuringiensis Se13 using Taguchi’s orthogonal array methodology

Objective

The insecticidal activity of Bacillus thuringiensis directly depends on the yield of delta-endotoxins. In this study, various nutritional and cultural parameters influencing delta-endotoxin synthesis by a local isolate of B. thuringiensis Se13 were investigated using Taguchi methods.

Methods

In the first experiment, four factors, incubation period, incubation temperature, initial pH and medium, each at four levels, were selected and an orthogonal array layout of L16 was carried out. In the second experiment, Taguchi’s orthogonal array method of L27 was used to evaluate the effects of the different concentration of medium components. Taguchi’s signal–noise ratio and variance analysis were applied to determine the effect of the factors. After each experiment, verification studies were carried out using determined optimum conditions.

Results

The optimum conditions for incubation period, incubation temperature, initial pH, and medium determined as 72 h, 30°C, pH 9, and M4 medium, respectively. In the second experiment, soybean flour (5%), glucose (5%), KH2PO4 (0.3%), K2HPO4 (0.1%), MgSO4 (0.4%) were determined as the optimum conditions. The delta-endotoxin yield was elevated to 1559.25 μg mL−1 when the factors were adjusted to optimum level.

Conclusion

Optimization using the Taguchi method appeared to be a good choice for the overproduction of delta-endotoxin.

Alternative low-cost process for large-scale production of Bacillus thuringiensis in a simple and novel culture system

An industrial-scale, profitable method for production of the most widely used bioinsecticide, Bacillus thuringiensis (Bt), is challenging because of its widespread application. The aim of this study is to present a strategy to develop a low-cost, large-scale bioprocess to produce Bt H14. This study was first focused on the design of a culture medium composed of economical and available components, such as glycerol and lysed Saccharomyces cerevisiae. The production goal of 1200 ITU was achieved using a medium composed of 20:20 g L^-1of glycerol:lysed yeast in batch cultures. Efforts were subsequently focused on the design of an appropriate culture system, and an original two-stage culture system was proposed. First, yeast (the primary component of the culture medium) are cultivated using a minimal mineral medium and lysed, and in the second stage, Bt is cultivated in the same bioreactor using the lysed yeasts as culture medium (supplemented with a feeding pulse of 10 g L^-1 glycerol). This system was called fed batch one pot (FOP). A new inoculation strategy is also presented in this study, since these Bt cultures were inoculated directly with heat pre-treated spores instead of vegetative bacteria to facilitate the bioprocess. This study was developed from the laboratory to production-scale bioreactors (measuring from 500 mL to 2500 L), and the efficiency of the proposed strategy was evident in LD₅₀ tests results, achieving 1796 ITU in large-scale processes. Both the use of non-conventional sources and the process development for biomass production are important for cost-effective production of Bt-based insecticides in mosquito control projects.

Industrial vitamin B12 production by Pseudomonas denitrificans using maltose syrup and corn steep liquor as the cost-effective fermentation substrates

The aerobic Pseudomonas denitrificans is widely used for industrial and commercial vitamin B12 fermentation, due to its higher productivity compared to the anaerobic vitamin B12-producing microorganisms. This paper aimed to develop a cost-effective fermentation medium for industrial vitamin B12 production by P. denitrificans in 120,000-l fermenter. It was found that maltose syrup (a low-cost syrup from corn starch by means of enzymatic or acid hydrolysis) and corn steep liquor (CSL, a by-product of starch industry) were greatly applicable to vitamin B12 production by P. denitrificans. Under the optimal fermentation medium performed by response surface methodology, 198.27 ± 4.60 mg/l of vitamin B12 yield was obtained in 120,000-l fermenter, which was close to the fermentation with the refined sucrose (198.80 mg/l) and was obviously higher than that obtained under beet molasses utilization (181.75 mg/l). Therefore, maltose syrups and CSL were the efficient and economical substrates for industrial vitamin B12 fermentation by P. denitrificans.

Application of Response Surface Methodology to Optimise Preparation High Antioxidant Activity Product from Pinctada fucata Muscle

The high antioxidant activity product was isolated from Pinctada fucata muscle by a method of Alcalase hydrolysis. Optimization using response surface methodology was performed and 3D response surfaces were plotted from the mathematical model. The results indicated that the optimal extraction conditions were as follows: pH 7.0, temperature 61°C, E/S 3.01%, hydrolysis time 3h, under the conditions of hydrolysis products of the DPPH radical scavenging rate of 67.3% and the degree of hydrolysis of 31.2%, which was in good agreement with the predicted model value.

Resistance performances of transgenic bt rice lines T(2A)-1 and T1c-19 against Cnaphalocrocis medinalis (Lepidoptera: Pyralidae)

The transgenic Bacillus thuringiensis (Bt) rice, Oryza sativa L., lines T(2A)-1 and T1c-19 expressing Cry2A* and Cry1C* from 'Minhui 63' (MH63) were evaluated for resistance to newly hatched and third-instar larvae of Cnaphalocrocis medinalis (Lepidoptera: Pyralidae), by using detached leaf laboratory bioassays. Both T(2A)-1 and T1c-19 rice showed high C. medinalis resistance; however, the lethal time (LT)50 of larvae fed with T(2A)-1 rice was significantly longer than that of larvae fed with T1c-19 rice, implying T1c-19 rice was more toxic to C. medinalis larvae. Larval mortality after 4 d on nitrogen-free MH63 was 25.5% compared with 2.4% mortality on high nitrogen fertilizer (250 kg N/ha) plants. Larval mortality on high nitrogen T(2A)-1 plants declined by 20% compared with nitrogen-free plants. However, resistance in T1c-19 plants was unaffected by nitrogen fertilizer. C. medinalis moths preferred MH63 at both the seedling and grain milk stages for oviposition but not the T1c-19 and T(2A)-1 Bt rice lines.