Characterization of Candida sp. NY7122, a novel pentose-fermenting soil yeast

Pentose metabolism and conversion to biofuels and high-value chemicals in yeasts

Pentose sugars are widespread in nature and two of them, D-xylose and L-arabinose belong to the most abundant sugars being the second and third by abundance sugars in dry plant biomass (lignocellulose) and in general on planet. Therefore, it is not surprising that metabolism and bioconversion of these pentoses attract much attention. Several different pathways of D-xylose and L-arabinose catabolism in bacteria and yeasts are known. There are even more common and really ubiquitous though not so abundant pentoses, D-ribose and 2-deoxy-D-ribose, the constituents of all living cells. Thus, ribose metabolism is example of endogenous metabolism whereas metabolism of other pentoses, including xylose and L-arabinose, represents examples of the metabolism of foreign exogenous compounds which normally are not constituents of yeast cells. As a rule, pentose degradation by the wild-type strains of microorganisms does not lead to accumulation of high amounts of valuable substances; however, productive strains have been obtained by random selection and metabolic engineering. There are numerous reviews on xylose and (less) L-arabinose metabolism and conversion to high value substances; however, they mostly are devoted to bacteria or the yeast Saccharomyces cerevisiae. This review is devoted to reviewing pentose metabolism and bioconversion mostly in non-conventional yeasts, which naturally metabolize xylose. Pentose metabolism in the recombinant strains of S. cerevisiae is also considered for comparison. The available data on ribose, xylose, L-arabinose transport, metabolism, regulation of these processes, interaction with glucose catabolism and construction of the productive strains of high-value chemicals or pentose (ribose) itself are described. In addition, genome studies of the natural xylose metabolizing yeasts and available tools for their molecular research are reviewed. Metabolism of other pentoses (2-deoxyribose, D-arabinose, lyxose) is briefly reviewed.

The Improvement of Bioethanol Production by Pentose-Fermenting Yeasts Isolated from Herbal Preparations, the Gut of Dung Beetles, and Marula Wine

Efficient conversion of pentose sugars to ethanol is important for an economically viable lignocellulosic bioethanol process. Ten yeasts fermenting both D-xylose and L-arabinose were subjected to an adaptation process with L-arabinose as carbon source in a medium containing acetic acid. Four Meyerozyma caribbica-adapted strains were able to ferment L-arabinose to ethanol in the presence of 3 g/L acetic acid at 35°C. Meyerozyma caribbica Mu 2.2f fermented L-arabinose to produce 3.0 g/L ethanol compared to the parental strain with 1.0 g/L ethanol in the absence of acetic acid. The adapted M. caribbica Mu 2.2f strain produced 3.6 and 0.8 g/L ethanol on L-arabinose and D-xylose, respectively, in the presence of acetic acid while the parental strain failed to grow. In a bioreactor, the adapted M. caribbica Mu 2.2f strain produced 5.7 g/L ethanol in the presence of 3 g/L acetic acid with an ethanol yield and productivity of 0.338 g/g and 0.158 g/L/h, respectively, at a K _L a value of 3.3 h^-1. The adapted strain produced 26.7 g/L L-arabitol with a yield of 0.900 g/g at a K _L a value of 4.9 h^-1.

Screening of new yeast Pichia manchurica for arabitol production

Arabitol has several applications in food and pharmaceutical industries as a natural sweetener, dental caries inhibitor, and texturing agent. Newly isolated yeast strains from seawater, sugarcane plantation soil samples, and Zygosaccharomyces rouxii 2635 from MTCC were tested for arabitol production. The yield of arabitol was found to be higher in seawater isolate (24.6 g L^-1 ) compared to two soil isolates (22.5 g L^-1 ) and Z. rouxii (19.4 g L^-1 ). Based on ITS 26S rDNA sequence analysis, the seawater isolate was identified as Pichia manchurica. In the present study, the effect of different substrates, trace elements, nitrogen sources, pH, and temperature on arabitol production was examined. Three different carbon sources viz. glucose, arabinose, and galactose were studied. Glucose was determined to be the best substrate for arabitol production (27.6 g L^-1 ) followed by arabinose (13.7 g L^-1 ) and galactose (7.7 g L^-1 ). Maximum production of arabitol was observed at pH 6.0 (34.7 g L^-1 ). In addition, arabitol production was high (35.7 g L^-1 ) at temperature of 30 °C. Among the different concentrations of ammonium sulfate tested (3, 4.5, 6, 7.5, and 9 g L^-1 ) concentration of 6 g L^-1 resulted in higher arabitol Individual metal ions had no effect on arabitol production by this strain as compared to control. Results obtained in this study identify ways for improved arabitol production with natural isolates using microbial processes.

The production of arabitol by a novel plant yeast isolate Candida parapsilosis 27RL-4

Polyalcohol arabitol can be used in the food and pharmaceutical industries as a natural sweetener, a dental caries reducer, and texturing agent. Environmental samples were screened to isolate effective yeast producers of arabitol. The most promising isolate 27RL-4, obtained from raspberry leaves, was identified genetically and biochemically as Candida parapsilosis. It secreted 10.42– 10.72 g l-1 of product from 20 g l-1 of L-arabinose with a yield of 0.51 - 0.53 g g-1 at 28°C and a rotational speed of 150 rpm. Batch cultures showed that optimal pH value for arabitol production was 5.5. High yields and productivities of arabitol were obtained during incubation of the yeast at 200 rpm, or at 32°C, but the concentrations of the polyol did not exceed 10 g l-1. In modified medium, with reduced amounts of nitrogen compounds and pH 5.5-6.5, lower yeast biomass produced a similar concentration of arabitol, suggesting higher efficiency of yeast cells. This strain also produced arabitol from glucose, with much lower yields. The search for new strains able to successfully produce arabitol is important for allowing the utilization of sugars abundant in plant biomass.

The Ability of a Novel Strain Scheffersomyces (Syn. Candida) shehatae Isolated from Rotten Wood to Produce Arabitol

Arabitol is a polyalcohol which has about 70% of the sweetness of sucrose and an energy density of 0.2 kcal/g. Similarly to xylitol, it can be used in the food and pharmaceutical industries as a natural sweetener, a texturing agent, a dental caries reducer, and a humectant. Biotechnological production of arabitol from sugars represents an interesting alternative to chemical production. The yeast Scheffersomyces shehatae strain 20BM-3 isolated from rotten wood was screened for its ability to produce arabitol from L-arabinose, glucose, and xylose. This isolate, cultured at 28°C and 150 rpm, secreted 4.03 ± 0.00 to 7.97 ± 0.67 g/l of arabitol from 17–30 g/l of L-arabinose assimilated from a medium containing 20–80 g/l of this pentose with yields of 0.24 ± 0.00 to 0.36 ± 0.02 g/g. An optimization study demonstrated that pH 4.0, 32°C, and a shaking frequency of 150 rpm were the optimum conditions for arabitol production by the investigated strain. Under these conditions, strain 20BM-3 produced 6.2 ± 0.17 g/l of arabitol from 17.5 g/l of arabinose after 4 days with a yield of 0.35 ± 0.01 g/g. This strain also produced arabitol from glucose, giving much lower yields, but did not produce it from xylose. The new strain can be successfully used for arabitol production from abundantly available sugars found in plant biomass.

Competition assays and physiological experiments of soil and phyllosphere yeasts identify Candida subhashii as a novel antagonist of filamentous fungi

BACKGROUND

While recent advances in next generation sequencing technologies have enabled researchers to readily identify countless microbial species in soil, rhizosphere, and phyllosphere microbiomes, the biological functions of the majority of these species are unknown. Functional studies are therefore urgently needed in order to characterize the plethora of microorganisms that are being identified and to point out species that may be used for biotechnology or plant protection. Here, we used a dual culture assay and growth analyses to characterise yeasts (40 different isolates) and their antagonistic effect on 16 filamentous fungi; comprising plant pathogens, antagonists, and saprophytes.

RESULTS

Overall, this competition screen of 640 pairwise combinations revealed a broad range of outcomes, ranging from small stimulatory effects of some yeasts up to a growth inhibition of more than 80% by individual species. On average, yeasts isolated from soil suppressed filamentous fungi more strongly than phyllosphere yeasts and the antagonistic activity was a species-/isolate-specific property and not dependent on the filamentous fungus a yeast was interacting with. The isolates with the strongest antagonistic activity were Metschnikowia pulcherrima, Hanseniaspora sp., Cyberlindnera sargentensis, Aureobasidium pullulans, Candida subhashii, and Pichia kluyveri. Among these, the soil yeasts (C. sargentensis, A. pullulans, C. subhashii) assimilated and/or oxidized more di-, tri- and tetrasaccharides and organic acids than yeasts from the phyllosphere. Only the two yeasts C. subhashii and M. pulcherrima were able to grow with N-acetyl-glucosamine as carbon source.

CONCLUSIONS

The competition assays and physiological experiments described here identified known antagonists that have been implicated in the biological control of plant pathogenic fungi in the past, but also little characterised species such as C. subhashii. Overall, soil yeasts were more antagonistic and metabolically versatile than yeasts from the phyllosphere. Noteworthy was the strong antagonistic activity of the soil yeast C. subhashii, which had so far only been described from a clinical sample and not been studied with respect to biocontrol. Based on binary competition assays and growth analyses (e.g., on different carbon sources, growth in root exudates), C. subhashii was identified as a competitive and antagonistic soil yeast with potential as a novel biocontrol agent against plant pathogenic fungi.

Production of arabitol by yeasts: current status and future prospects

Arabitol belongs to the pentitol family and is used in the food industry as a sweetener and in the production of human therapeutics as an anticariogenic agent and an adipose tissue reducer. It can also be utilized as a substrate for chemical products such as arabinoic and xylonic acids, propylene, ethylene glycol, xylitol and others. It is included on the list of 12 building block C3-C6 compounds, designated for further biotechnological research. This polyol can be produced by yeasts in the processes of bioconversion or biotransformation of waste materials from agriculture, the forest industry (l-arabinose, glucose) and the biodiesel industry (glycerol). The present review discusses research on native yeasts from the genera Candida, Pichia, Debaryomyces and Zygosaccharomyces as well as genetically modified strains of Saccharomyces cerevisiae which are able to utilize biomass hydrolysates to effectively produce L- or D-arabitol. The metabolic pathways of these yeasts leading from sugars and glycerol to arabitol are presented. Although the number of reports concerning microbial production of arabitol is rather limited, the research on this topic has been growing for the last several years, with researchers looking for new micro-organisms, substrates and technologies.

Development of a phenotypic assay for characterisation of ethanologenic yeast strain sensitivity to inhibitors released from lignocellulosic feedstocks

Inhibitors released by the breakdown of plant cell walls prevent efficient conversion of sugar into ethanol. The aim of this study was to develop a fast and reliable inhibitor sensitivity assay for ethanologenic yeast strains. The assay comprised bespoke 96-well plates containing inhibitors in isolation or combination in a format that was compatible with the Phenotypic Microarray Omnilog reader (Biolog, hayward, CA, USA). A redox reporter within the assay permits analysis of inhibitor sensitivity in aerobic and/or anaerobic conditions. Results from the assay were verified using growth on spot plates and tolerance assays in which maintenance of viability was assessed. The assay allows for individual and synergistic effects of inhibitors to be determined. It was observed that the presence of both acetic and formic acid significantly inhibited the yeast strains assessed, although this impact could be partially mitigated by buffering to neutral pH. Scheffersomyces stipitis, Candida spp., and Pichia guilliermondii demonstrated increased sensitivity to short chain weak acids at concentrations typically present in lignocellulosic hydrolysates. S. cerevisiae exhibited robustness to short chain weak acids at these concentrations. However, S. stipitis, Candida spp., and P. guilliermondii displayed increased tolerance to HMF when compared to that observed for S. cerevisiae. The results demonstrate that the phenotypic microarray assay developed in the current study is a valuable tool that can be used to identify yeast strains with desirable resistance to inhibitory compounds found in lignocellulosic hydrolysates.