Identification and characterization of a novel alkaline α-amylase Amy703 belonging to a new clade from Bacillus pseudofirmus

N-terminal domain truncation yielded a unique dimer of polysaccharide hydrolase with enhanced enzymatic activity, stability and calcium ion independence

Domain engineering, including domain truncation, fusion, or swapping, has become a common strategy to improve properties of enzymes, especially glycosyl hydrolases. However, there are few reports explaining the mechanism of increased activity from a protein structure perspective. Amy703 is an alkaline amylase with a unique N-terminal domain. Prior studies have shown that N-Amy, a mutant without an N-terminal domain, exhibits improved activity, stability, and calcium ion independence. In this study, we have used X-ray crystallography to determine the crystal structure of N-Amy and used AlphaFold2 to model the Amy703 structure, respectively. We further used size exclusion chromatography to show that Amy703 existed as a monomer, whereas N-Amy formed a unique dimer. It was found that the N-terminus of one monomer of N-Amy was inserted into the catalytic domain of its symmetrical subunit, resulting in the expansion of the catalytic pocket. This also significantly increased the pKa of the hydrogen donor Glu350, thereby enhancing substrate binding affinity and contributing to increased N-Amy activity. Meanwhile, two calcium ions were found to bind to N-Amy at different binding sites, which also contributed to the stability of protein. Therefore, this study provided new structural insights into the mechanisms of various glycosyl hydrolases.

Structure-based modification of a-amylase by conventional and emerging technologies: Comparative study on the secondary structure, activity, thermal stability and amylolysis efficiency

α-Amylase is an endo-enzyme that catalyzes the hydrolysis of starch into shorter oligosaccharides. α-Amylase plays a crucial role in various industries. Manipulated α-amylases are of particular interest due to their remarkable amylolysis efficiency and thermostability for large-scale biotechnological processes. The retained catalytic activity of enzymes is decreased according to extreme pH, temperature, pressure, and chemical reagents. Broad industrial applications of α-amylases need special properties such as stability against temperature, pH, and chelators, and also attain reusability, desirable enzymatic activity, efficiency, and selectivity. Considering the biotechnological importance of α-amylase, its high stability is the most critical challenge for its economic viability. Therefore, improving its functionality and stability recently gained much interest. To achieve this purpose, various emerging technologies in combination with conventional methods on α-Amylases with different sources have been conducted. The present review is an attempt to summarize the effect of various conventional methods and emerging technologies employed to date on α-amylase secondary structure, thermal stability, and performance.

Development of a Bacterial FhuD-Lysozyme-SsrA Mediated Autolytic (FLSA) System for Effective Release of Intracellular Products

Developing effective bacterial autolytic systems for fast release of intracellular bioproducts could simplify purification procedures and help with the high throughput screening of mutant libraries in protein engineering. Here, we developed a fast and tightly regulated E. coli autolytic system, named the FhuD-lysozyme-SsrA mediated autolytic (FLSA) system, by integrating the secretion signal peptide, T7 lysozyme, and E. coli ClpX/P-SsrA protein degradation machinery. To decrease the cytotoxicity of leaky T7 lysozymes, the SsrA tag was fused to the C-terminus of T7 lysozyme to confer a tight regulation of its production. Using sfGFP as a reporter, we demonstrated that anchoring the Sec-Tat dual pathway signal peptide FhuD to the N-terminus of T7 lysozyme-SsrA could give the highest cell lysing efficiency. The optimization of the FLSA system indicated that weak alkaline conditions (pH 8.0) and 0.5% Triton X-100 could further increase the lysing efficiency by about 24%. The FLSA system was validated by efficient production of sfGFP and human growth hormone 1 (hGH1) in a shake flask, with a cell lytic efficiency of approximately 82% and 80%, respectively. Besides, the FLSA system was applied for large-scale fermentation, in which approximately 90% sGFP was released with a cell density OD₆₀₀ of 110. Moreover, the FLSA system was also tested for α-amylase mutant library screening in microplates, and the results showed that intracellular α-amylase can be efficiently released out of cells for activity quantitation. In all, the FLSA system can facilitate the release of intracellular recombinant proteins into the cell culture medium, which has the potential to serve as an integrated system for large-scale production of recombinant targets and high throughput enzyme engineering in synthetic biology.

Discovery of a New Microbial Origin Cold-Active Neopullulanase Capable for Effective Conversion of Pullulan to Panose

Panose is a type of functional sugar with diverse bioactivities. The enzymatic conversion bioprocess to produce high purity panose with high efficiency has become increasingly important. Here, a new neopullulanase (NPase), Amy117 from B. pseudofirmus 703, was identified and characterized. Amy117 presented the optimal activity at pH 7.0 and 30 °C, its activity is over 40% at 10 °C and over 80% at 20 °C, which is cold-active. The enzyme cleaved α-1, 4-glycosidic linkages of pullulan to generate panose as the only hydrolysis product, and degraded cyclodextrins (CDs) and starch to glucose and maltose, with an apparent preference for CDs. Furthermore, Amy117 can produce 72.7 mg/mL panose with a conversion yield of 91% (w/w) based on 80 mg/mL pullulan. The sequence and structure analysis showed that the low proportion of Arg, high proportion of Asn and Gln, and high α-helix levels in Amy117 may contribute to its cold-active properties. Root mean square deviation (RMSD) analysis also showed that Amy117 is more flexible than two mesophilic homologues. Hence, we discovered a new high-efficiency panose-producing NPase, which so far achieves the highest panose production and would be an ideal candidate in the food industry.

Understanding the Effect of Multiple Domain Deletion in DNA Polymerase I from Geobacillus Sp. Strain SK72

The molecular structure of DNA polymerase I or family A polymerases is made up of three major domains that consist of a single polymerase domain with two extra exonuclease domains. When the N-terminal was deleted, the enzyme was still able to perform basic polymerase activity with additional traits that used isothermal amplification. However, the 3′-5′ exonuclease domain that carries a proofreading activity was disabled. Yet, the structure remained attached to the 5′-3′ polymerization domain without affecting its ability. The purpose of this non-functional domain still remains scarce. It either gives negative effects or provides structural support to the DNA polymerase. Here, we compared the effect of deleting each domain against the polymerase activity. The recombinant wild type and its variants were successfully purified and characterized. Interestingly, SK72-Exo (a large fragment excluding the 5′-3′ exonuclease domain) exhibited better catalytic activity than the native SK72 (with all three domains) at similar optimum temperature and pH profile, and it showed longer stability at 70 °C. Meanwhile, SK72-Exo2 (polymerization domain without both the 5′-3′ and 3′-5′ exonuclease domain) displayed the lowest activity with an optimum at 40 °C and favored a more neutral environment. It was also the least stable among the variants, with almost no activity at 50 °C for the first 10 min. In conclusion, cutting both exonuclease domains in DNA polymerase I has a detrimental effect on the polymerization activity and structural stability.

Purification and characterization of a novel wild-type α-amylase from Antarctic sea ice bacterium Pseudoalteromonas sp. M175

A novel wild-type α-amylase named wtAmy175 from Pseudoalteromonas sp. M175 strain was purified through ammonium sulphate precipitation, DEAE cellulose, and Sephadex G-75 sequentially (25.83-fold, 7.67%-yield) for biochemical characterization. SDS-PAGE and zymographic activity staining of purified enzyme showed a single band with a predicted molecular mass of about 61 kDa. The optimum temperature and pH for enzyme activity were 30 °C and 7.5, respectively. Additionally, the enzyme exhibited high activity and remarkable stability in 0-10 mM SDS. The values of K_m and V_max for soluble starch as substrate were 2.47 mg/ml and 0.103 mg/ml/min, respectively. Analysis of hydrolysis products of soluble starch and maltooligosaccharides showed that wtAmy175 cleaved the interior and the terminal α-1,4-glycosidic linkage in starch, and had transglycosylation activity. The result of fluorescence spectroscopy showed that wtAmy175 had strong binding affinity with soluble starch. In brief, this study discovered the first wild-type α-amylase so far with several distinctive properties of cold activity, SDS-resistance, and the mixed activity of α-amylase and α-glucosidase, suggesting that wtAmy175 possess high adaptive capability to endure harsh industrial conditions and would be an excellent candidate in detergent and textile industries.

A combined treatment using ethylmethane sulfonate and ultraviolet light to compare amylase production by three Bacillus sp. isolates

In this study, three Bacillus sp.-producing amylase enzymes were isolated from soil samples and identified using 16S rDNA sequence analysis. Amylase production and total protein productions were spectrophotometrically measured. The following media were tested to increase enzyme production: LB medium and molasses. Three Bacillus sp. were identified as follows: Bacillus subtilis subtilis, Bacillus thuringiensis, and Bacillus cereus. Amylase production levels were in the range of 10 U/mL, whereas total protein production levels were at 15 mg/mL. Higher amylase activity was found in the Bacillus subtilis isolate. Ethylmethane sulfonate (EMS) and ultraviolet (UV) mutagenesis in combination were applied to compare amylase production. Amylase activity was increased to around 58% in the treatment with 0.03 mL of EMS and UV when compared to the control group. A pilot scale bioreactor with a total working volume of 10 liters was used to produce amylase by B. subtilis subtilis. In conclusion, B. subtilis subtilis can be used to produce amylase enzyme for various industrial purposes, and, for the first time, the amylase activities of B. subtilis can be enhanced with EMS and UV treatment.

A new GH13 α-glucosidase from alkaliphilic Bacillus pseudofirmus 703 with both exo-α-l, 4-glucosidase and oligo-l, 6-glucosidase activities toward amylopectin

Debranching of (1, 6)-α-linkages in starch is of great significance as it is widely used in different industries. In recent years, identifying a single potential enzyme that could debranch (1, 6)-α-linkages and cleave (1, 4)-α-linkages brought great interest as amylopectin possessed both (1, 4)-α- and (1, 6)-α-linkages. In the present study, a 64\,kDa exo-α-l, 4-glucosidase from Bacillus pseudofirmus 703, annotated as Amy112, was cloned and characterized. Biochemical analysis indicated that heterologous Amy112 expressed in Escherichia coli exhibited a high activity against amylopectin, with the optimal temperature and pH of 40°C and pH 7.0, respectively. Addition of K⁺ ions improved the amy112 activity by 12%, but Li⁺, Ca²⁺ and Mg²⁺ ions showed no significant effect. Amy112 sequence homology revealed that it belonged to glycoside hydrolase family 13, showing 65% identity with α-glucosidase GSJ from Geobacillus sp. HTA-462. This is the first report indicating that Amy112 from B. pseudofirmus 703 belongs to GH13 enzyme family, having both exo-α-1, 4-glucosidase and oligo-l, 6-glucosidase activities. However, no transglycosylation activity was detected in LC-MS analysis. Amy112 would be of great significance of being utilized to debranch starch in different industries in a cost effective manner.

Truncation of the unique N-terminal domain improved the thermos-stability and specific activity of alkaline α-amylase Amy703

High pH condition is of special interest for the potential applications of alkaline α-amylase in textile and detergent industries. Thus, there is a continuous demand to improve the amylase's properties to meet the requirements set by specific applications. Here we reported the systematic study of modular domain engineering to improve the specific activity and stability of the alkaline α-amylase from Bacillus pseudofirmus 703. The specific activity of the N-terminal domain truncated mutant (N-Amy) increased by ~35-fold with a significantly improved thermo-stability. Kinetic analysis demonstrated that the Kcat and Kcat/Kmof N-Amy were enhanced by 1300-fold and 425.7-fold, respectively, representing the largest catalytic activity improvement of the engineered α-amylases through the methods of domain deletion, fusion or swapping. In addition, different from the wild-type Amy703, no exogenous Ca(2+) were required for N-Amy to maintain its full catalytic activity, implying its superior potential for many industrial processes. Circular dichroism analysis and structure modeling revealed that the increased compactness and α-helical content were the main contributors for the improved thermo-stability of N-Amy, while the improved catalytic efficiency was mainly attributed by the increased conformational flexibility around the active center.

Halophilic alkali- and thermostable amylase from a novel polyextremophilic Amphibacillus sp. NM-Ra2

Extracellular gluco-amylo-pullulanase from Amphibacillus sp. NM-Ra2 was purified to homogeneity by ethanol precipitation, anion exchange chromatography and gel filtration chromatography. Molecular mass of the enzyme was 50kDa (SDS-PAGE). The enzyme showed maximal activity at 1.9 M NaCl, pH50°C 8.0 and 54°C and was active from 0 to 4.3 M NaCl and 37 to 65°C. The enzyme was inhibited by EDTA and was stable and active in the presence of PMSF, DTT, H2O2, Triton-X-100, Tween 20 and Tween 80. Ca2+ is inessential for activity. The amylase was stimulated with K+ and inhibited with Cu2+ and Mg2+. Hg2+, Zn2+ and Fe2+ had no effect on activity. Amylase was stable and active in the presence of ethanol, methanol and benzene (25%, v/v). The enzyme hydrolyzed linear and branched polysaccharides including pullulan, glycogen and amylopectin, and hydrolyzed raw wheat starch and raw corn starch (14.6% and 13.5% over 2 h). Amylase activity was inhibited by soluble starch concentrations greater than 0.3%. The major products of soluble starch hydrolysis were maltose and maltotriose. The amylase, being halophilic and alkali-thermostable, in addition to being resistant to surfactants, oxidizing agents and organic solvents, can find applications in the starch processing, pharmaceutical, food and paper/pulp industries.