Electrophoretic Determination of Lactococcus lactis Modified by Zinc Ions

Development of a DC-Biased AC-Stimulated Microfluidic Device for the Electrokinetic Separation of Bacterial and Yeast Cells

Electrokinetic (EK) microsystems, which are capable of performing separations without the need for labeling analytes, are a rapidly growing area in microfluidics. The present work demonstrated three distinct binary microbial separations, computationally modeled and experimentally performed, in an insulator-based EK (iEK) system stimulated by DC-biased AC potentials. The separations had an increasing order of difficulty. First, a separation between cells of two distinct domains (Escherichia coli and Saccharomyces cerevisiae) was demonstrated. The second separation was for cells from the same domain but different species (Bacillus subtilis and Bacillus cereus). The last separation included cells from two closely related microbial strains of the same domain and the same species (two distinct S. cerevisiae strains). For each separation, a novel computational model, employing a continuous spatial and temporal function for predicting the particle velocity, was used to predict the retention time (tR,p) of each cell type, which aided the experimentation. All three cases resulted in separation resolution values Rs>1.5, indicating complete separation between the two cell species, with good reproducibility between the experimental repetitions (deviations < 6%) and good agreement (deviations < 18%) between the predicted tR,p and experimental (tR,e) retention time values. This study demonstrated the potential of DC-biased AC iEK systems for performing challenging microbial separations.

Isotachophoretic quantification of total viable bacteria on meat and surfaces

BACKGROUND

The quantification of microbes, particularly live bacteria, is of utmost importance in assessing the quality of meat products. In the context of meat processing facilities, prompt identification and removal of contaminated carcasses or surfaces is crucial to ensuring the continuous production of safe meat for human consumption. The plate count method and other traditional detection methods are not only labour-intensive but also time-consuming taking 24-48 h.

RESULTS

In this report, we present a novel isotachophoretic quantification method utilizing two nucleic acid stains, SYTO9 and propionic iodide, for the detection of total viable bacteria. The study employed E. coli M23 bacteria as a model organism, with an analysis time of only 30 min. The method demonstrated a limit of detection (LOD) of 184 CFU mL-1 and 14 cells mL-1 for total viable count and total cell count, respectively. Furthermore, this new approach is capable of detecting the microbial quality standard limits for food contacting surfaces (10 CFU cm-2) and meat (1.99 × 104 CFU cm-2) by swabbing an area of 10 × 10 cm2.

SIGNIFICANCE

In contrast to the culture-based methods usually employed in food processing facilities, this isotachophoretic technique enables easy and rapid detection (<30 min) of microorganisms, facilitating crucial decision-making essential for maintaining product quality and safety.

Deciphering the complexes of zinc ions and hen egg white lysozyme: Instrumental analysis, molecular docking, and antimicrobial assessment

In the research presented in this manuscript, an intricate study has been carried out on the interaction of zinc ions with the hen egg white lysozyme (HEWL) protein. Utilizing a spectroscopic technique, the alterations that arise due to the binding of Zn2+ to the HEWL were scrutinized, underscoring the paramount significance of deprotonated carboxyl and thiol groups in the process of binding. The binding phenomena were substantiated using capillary electrophoresis integrated with inductively coupled plasma mass spectrometry (CE-ICP-MS). Further spectrometric assessments (MALDI-TOF MS and FT-ICR-MS) shed light on the direct interaction of zinc ions with the functional groups of the protein. Importantly, high-resolution FT-ICR-MS techniques elucidated the capability of a single protein molecule to bind to multiple zinc ions. The empirically derived spectroscopic data received additional confirmation via a molecular docking study of the Zn2+ binding process, which highlighted a substantial affinity between the predicted 3D model of zinc-lysozyme complexes. Predominantly, the interaction between the bound entities was observed at the cysteine residues. Lastly, the conducted antimicrobial tests revealed that the zinc-lysozyme complexes manifest an inhibitory effect against bacterial (E. coli and S. aureus) and yeast (C. albicans) strains.

Assessing the Discriminatory Capabilities of iEK Devices under DC and DC-Biased AC Stimulation Potentials

There is a rising need for rapid and reliable analytical methods for separating microorganisms in clinical and biomedical applications. Microscale-insulator-based electrokinetic (iEK) systems have proven to be robust platforms for assessing a wide variety of microorganisms. Traditionally, iEK systems are usually stimulated with direct-current (DC) potentials. This work presents a comparison between using DC potentials and using DC-biased alternating-current (AC) potentials in iEK systems for the separation of microorganisms. The present study, which includes mathematical modeling and experimentation, compares the separation of bacterial and yeast cells in two distinct modes by using DC and DC-biased AC potentials. The quality of both separations, assessed in terms of separation resolution (Rs), showed a complete separation (Rs = 1.51) with the application of a DC-biased low-frequency AC signal but an incomplete separation (Rs = 0.55) with the application of an RMS-equivalent DC signal. Good reproducibility between experimental repetitions (<10%) was obtained, and good agreement (~18% deviation) was observed between modeling and experimental retention times. The present study demonstrates the potential of extending the limits of iEK systems by employing DC-biased AC potentials to perform discriminatory separations of microorganisms that are difficult to separate with the application of DC potentials.

Separation of Cells and Microparticles in Insulator-Based Electrokinetic Systems

Presented here is the first continuous separation of microparticles and cells of similar characteristics employing linear and nonlinear electrokinetic phenomena in an insulator-based electrokinetic (iEK) system. By utilizing devices with insulating features, which distort the electric field distribution, it is possible to combine linear and nonlinear EK phenomena, resulting in highly effective separation schemes that leverage the new advancements in nonlinear electrophoresis. This work combines mathematical modeling and experimentation to separate four distinct binary mixtures of particles and cells. A computational model with COMSOL Multiphysics was used to predict the retention times (t_R,p) of the particles and cells in iEK devices. Then, the experimental separations were carried out using the conditions identified with the model, where the experimental retention time (t_R,e) of the particles and cells was measured. A total of four distinct separations of binary mixtures were performed by increasing the level of difficulty. For the first separation, two types of polystyrene microparticles, selected to mimic Escherichia coli and Saccharomyces cerevisiae cells, were separated. By leveraging the knowledge gathered from the first separation, a mixture of cells of distinct domains and significant size differences, E. coli and S. cerevisiae, was successfully separated. The third separation also featured cells of different domains but closer in size: Bacillus cereus versus S. cerevisiae. The last separation included cells in the same domain and genus, B. cereus versus Bacillus subtilis. Separation results were evaluated in terms of number of plates (N) and separation resolution (R_s), where R_s values for all separations were above 1.5, illustrating complete separations. Experimental results were in agreement with modeling results in terms of retention times, with deviations in the 6-27% range, while the variation between repetitions was between 2 and 18%, demonstrating good reproducibility. This report is the first prediction of the retention time of cells in iEK systems.

Comprehensive study upon physicochemical properties of bio-ZnO NCs

In this study, for the first time, the comparison of commercially available chemical ZnO NCs and bio-ZnO NCs produced extracellularly by two different probiotic isolates (Latilactobacillus curvatus MEVP1 [OM736187] and Limosilactobacillus fermentum MEVP2 [OM736188]) were performed. All types of ZnO formulations were characterized by comprehensive interdisciplinary approach including various instrumental techniques in order to obtain nanocomposites with suitable properties for further applications, i.e. biomedical. Based on the X- ray diffraction analysis results, all tested nanoparticles exhibited the wurtzite structure with an average crystalline size distribution of 21.1 nm (CHEM_ZnO NCs), 13.2 nm (1C_ZnO NCs) and 12.9 nm (4a_ZnO NCs). The microscopy approach with use of broad range of detectors (SE, BF, HAADF) revealed the core-shell structure of bio-ZnO NCs, compared to the chemical one. The nanoparticles core of 1C and 4a_ZnO NCs are coated by the specific organic deposit coming from the metabolites produced by two probiotic strains, L. fermentum and L. curvatus. Vibrational infrared spectroscopy, photoluminescence (PL) and mass spectrometry (LDI-TOF-MS) have been used to monitor the ZnO NCs surface chemistry and allowed for better description of bio-NCs organic coating composition (amino acids residues). The characterized ZnO formulations were then assessed for their photocatalytic properties against methylene blue (MB). Both types of bio-ZnO NCs exhibited good photocatalytic activity, however, the effect of CHEM_ZnO NCs was more potent than bio-ZnO NCs. Finally, the colloidal stability of the tested nanoparticles were investigated based on the zeta potential (ZP) and hydrodynamic diameter measurements in dependence of the nanocomposites concentration and investigation time. During the biosynthesis of nano-ZnO, the increment of pH from 5.7 to around 8 were observed which suggested possible contribution of zinc aquacomplexes and carboxyl-rich compounds resulted in conversion of zinc tetrahydroxy ion complex to ZnO NCs. Overall results in present study suggest that used accessible source such us probiotic strains, L. fermentum and L. curvatus, for extracellular bio-ZnO NCs synthesis are of high interest. What is important, no significant differences between organic deposit (e.g. metabolites) produced by tested strains were noticed-both of them allowed to form the nanoparticles with natural origin coating. In comparison to chemical ZnO NCs, those synthetized via microbiological route are promising material with further biological potential once have shown high stability during 7 days.

Identification, Structure and Characterization of Bacillus tequilensis Biofilm with the Use of Electrophoresis and Complementary Approaches

Biofilm is a complex structure formed as a result of the accumulation of bacterial cell clusters on a surface, surrounded by extracellular polysaccharide substances (EPSs). Biofilm-related bacterial infections are a significant challenge for clinical treatment. Therefore, the main goal of our study was to design a complementary approach in biofilm characterization before and after the antibiotic treatment. The 16S rRNA gene sequencing allowed for the identification of Bacillus tequilensis, as a microbial model of the biofilm formation. Capillary electrophoresis demonstrates the capability to characterize and show the differences of the electrophoretic mobility between biofilms untreated and treated with antibiotics: amoxicillin, gentamicin and metronidazole. Electrophoretic results show the clumping phenomenon (amoxicillin and gentamicin) as a result of a significant change on the surface electric charge of the cells. The stability of the dispersion study, the molecular profile analysis, the viability of bacterial cells and the scanning morphology imaging were also investigated. The microscopic and spectrometry study pointed out the degradation/remodeling of the EPSs matrix, the inhibition of the cell wall synthesis and blocking the ribosomal protein synthesis by amoxicillin and gentamicin. However, untreated and treated bacterial cells show a high stability for the biofilm formation system. Moreover, on the basis of the type of the antibiotic treatment, the mechanism of used antibiotics in cell clumping and degradation were proposed.

Microscale electrokinetic-based analysis of intact cells and viruses

Miniaturized electrokinetic methods have proven to be robust platforms for the analysis and assessment of intact microorganisms, offering short response times and higher integration than their bench-scale counterparts. The present review article discusses three types of electrokinetic-based methodologies: electromigration or motion-based techniques, electrode-based electrokinetics, and insulator-based electrokinetics. The fundamentals of each type of methodology are discussed and relevant examples from recent reports are examined, to provide the reader with an overview of the state-of-the-art on the latest advancements on the analysis of intact cells and viruses with microscale electrokinetic techniques. The concluding remarks discuss the potential applications and future directions.

A new approach to identifying pathogens, with particular regard to viruses, based on capillary electrophoresis and other analytical techniques

Fast determination, identification and characterization of pathogens is a significant challenge in many fields, from industry to medicine. Standard approaches (e.g., culture media and biochemical tests) are known to be very time-consuming and labor-intensive. Conversely, screening techniques demand a quick and low-cost grouping of microbial isolates, and current analysis call for broad reports of pathogens, involving the application of molecular, microscopy, and electromigration techniques, DNA fingerprinting and also MALDI-TOF methods. The present COVID-19 pandemic is a crisis that affects rich and poor countries alike. Detection of SARS-CoV-2 in patient samples is a critical tool for monitoring disease spread, guiding therapeutic decisions and devising social distancing protocols. The goal of this review is to present an innovative methodology based on preparative separation of pathogens by electromigration techniques in combination with simultaneous analysis of the proteome, lipidome, and genome using laser desorption/ionization analysis.

CE-DAD-MS/MS in the simultaneous determination and identification of selected antibiotic drugs and their metabolites in human urine samples

In this study, a new analytical method was developed and validated for the simultaneous analysis of antibiotic drugs (amoxicillin, cefotaxime, ciprofloxacin, clindamycin, linezolid, metronidazole) and their metabolites (amoxycilloic acid, amoxicillin diketopiperazine, 3-desacetyl cefotaxime lactone, clindamycin sulfoxide, ciprofloxacin piperazinyl-N4-sulfate, linezolid N-oxide, metronidazole-OH) in human urine. Capillary electrophoresis (CE) along with the tandem mass spectrometry (MS/MS) was used to determine and identify all analytes. Appropriate conditions for MS/MS measurements along with the use of the central composite design were optimized. The effects of different analytical conditions (the composition, the concentration, and the pH value of the background electrolyte, the time and pressure of the injection, the capillary temperature and influence of the organic modifier) on the migration and separation of antibiotic drugs and metabolites were examined using the CE-DAD. The analytical procedure was linear for concentrations ranging from 20 to 1000 ng/mL, with determination coefficients higher than 0.99 for all the analytes. The validated analytical procedure was then applied to the measurement of antibiotic drugs and their metabolites in human urine samples.

The study of the molecular mechanism of Lactobacillus paracasei clumping via divalent metal ions by electrophoretic separation

In this work, the molecular mechanism of Lactobacillus paracasei bio-colloid clumping under divalent metal ions treatment such as zinc, copper and magnesium at constant concentrations was studied. The work involved experimental (electrophoretic - capillary electrophoresis in pseudo-isotachophoresis mode, spectroscopic and spectrometric - FT-IR and MALDI-TOF-MS, microscopic - fluorescent microscopy, and flow cytometry) and theoretical (DFT calculations of model complex systems) characterization. Electrophoretic results have pointed out the formation of aggregates under the Zn²⁺ and Cu²⁺ modification, whereas the use of the Mg²⁺ allowed focusing the zone of L. paracasei biocolloid. According to the FT-IR analysis, the major functional groups involved in the aggregation are deprotonated carboxyl and amide groups derived from the bacterial surface structure. Nature of the divalent metal ions was shown to be one of the key factors influencing the bacterial aggregation process. Proteomic analysis showed that surface modification had a considerable impact on bacteria molecular profiles and protein expression, mainly linked to the activation of carbohydrate and nucleotides metabolism as well with the transcription regulation and membrane transport. Density-functional theory (DFT) calculations of modeled Cu²⁺, Mg²⁺ and Zn²⁺ coordination complexes support the interaction between the divalent metal ions and bacterial proteins. Consequently, the possible mechanism of the aggregation phenomenon was proposed. Therefore, this comprehensive study could be further applied in evaluation of biocolloid aggregation under different types of metal ions.