Micromechanical Characterization of Intra-luminal Thrombus Tissue from Abdominal Aortic Aneurysms

Micromechanical and Ultrastructural Properties of Abdominal Aortic Aneurysms

Abdominal aortic aneurysms are a common condition of uncertain pathogenesis that can rupture if left untreated. Current recommended thresholds for planned repair are empirical and based entirely on diameter. It has been observed that some aneurysms rupture before reaching the threshold for repair whilst other larger aneurysms do not rupture. It is likely that geometry is not the only factor influencing rupture risk. Biomechanical indices aiming to improve and personalise rupture risk prediction require, amongst other things, knowledge of the material properties of the tissue and realistic constitutive models. These depend on the composition and organisation of the vessel wall which has been shown to undergo drastic changes with aneurysmal degeneration, with loss of elastin, smooth muscle cells, and an accumulation of isotropically arranged collagen. Most aneurysms are lined with intraluminal thrombus, which has an uncertain effect on the underlying vessel wall, with some authors demonstrating a reduction in wall stress and others a reduction in wall strength. The majority of studies investigating biomechanical properties of ex vivo abdominal aortic aneurysm tissues have used low-resolution techniques, such as tensile testing, able to measure the global material properties at the macroscale. High-resolution engineering techniques such as nanoindentation and atomic force microscopy have been modified for use in soft biological tissues and applied to vascular tissues with promising results. These techniques have the potential to advance the understanding and improve the management of abdominal aortic aneurysmal disease.

Abdominal Aortic Aneurysms Growth Is Associated With High Concentrations of Plasma Proteins in the Intraluminal Thrombus and Diseased Arterial Tissue

Objective—

Porosity of the intraluminal thrombus (ILT) is believed to convey biologically active components from the bloodstream toward the aneurismal wall. Accumulation of molecules in the abdominal aortic aneurysmatic tissue may influence vascular protein turnover and regulate abdominal aortic aneurysm growth. We sought to identify proteins with concentrations in the ILT and the abdominal aortic aneurysm wall which associate with aneurysmal expansion rate.

Approach and Results—

Proteomic analysis by liquid chromatography tandem-mass spectrometry of separated wall and ILT samples was correlated with preoperative aneurysmal growth rate in 24 individuals operated electively for infrarenal abdominal aortic aneurysm. The median preoperative growth rate was 3.8 mm/y (interquartile range, 3) and the mean observational time was 3.3±1.7 years. Plasma components dominated the group of proteins with tissue concentrations, which correlate positively with growth rates ( P <0.001, Fisher exact test, both in the ILT and the wall). In contrast, in the wall and thrombus samples, ECM (extracellular matrix) proteins were significantly more prevalent in the group of proteins with negative correlations to growth rates ( P <0.05, Fisher exact test). Similarly, a long series of proteins, related to cellular functions correlated negatively to growth rates.

Conclusions—

When the preoperative aneurysmatic growth rate has been high, the concentration of many plasma proteins residing in the ILT and the aneurysmatic tissue is also high, compatible with the hypothesis of increased tissue porosity and accumulation of plasma components as a driver of aneurysm expansion. Moreover, many matrix and cellular proteins which are found in high concentrations in slower-growing aneurysms provides new knowledge about potential treatment targets.

Exploring the Biological and Mechanical Properties of Abdominal Aortic Aneurysms Using USPIO MRI and Peak Tissue Stress: A Combined Clinical and Finite Element Study

Inflammation detected through the uptake of ultrasmall superparamagnetic particles of iron oxide (USPIO) on magnetic resonance imaging (MRI) and finite element (FE) modelling of tissue stress both hold potential in the assessment of abdominal aortic aneurysm (AAA) rupture risk. This study aimed to examine the spatial relationship between these two biomarkers. Patients (n = 50) > 40 years with AAA maximum diameters > = 40 mm underwent USPIO-enhanced MRI and computed tomography angiogram (CTA). USPIO uptake was compared with wall stress predictions from CTA-based patient-specific FE models of each aneurysm. Elevated stress was commonly observed in areas vulnerable to rupture (e.g. posterior wall and shoulder). Only 16% of aneurysms exhibited co-localisation of elevated stress and mural USPIO enhancement. Globally, no correlation was observed between stress and other measures of USPIO uptake (i.e. mean or peak). It is suggested that cellular inflammation and stress may represent different but complimentary aspects of AAA disease progression.

Modelling the failure precursor mechanism of lamellar fibrous tissues, example of the annulus fibrosus

The aims of this study were to assess the damage and failure strengths of lamellar fibrous tissues, such as the anterior annulus fibrosus (AF), and to develop a mathematical model of damage propagation of the lamellae and inter-lamellar connections. This level of modelling is needed to accurately predict the effect of damage and failure induced by trauma or clinical interventions. 26 ovine anterior AF cuboid specimens from 11 lumbar intervertebral discs were tested in radial tension and mechanical parameters defining damage and failure were extracted from the in-vitro data. Equivalent 1D analytical models were developed to represent the specimen strength and the damage propagation, accounting for the specimen dimensions and number of lamellae. Model parameters were calibrated on the in-vitro data. Similar to stiffness values reported for other orientations, the outer annulus was found stronger than the inner annulus in the radial direction, with failure at higher stress values. The inner annulus failed more progressively, showing macroscopic failure at a higher strain value. The 1D analytical model of damage showed that lamellar damage is predominant in the failure mechanism of the AF. The analytical model of the connections between lamellae allowed us to represent separately damage processes in the lamellae and the inter-lamellar connections, which cannot be experimentally tested individually.

Biomechanical Rupture Risk Assessment: A Consistent and Objective Decision-Making Tool for Abdominal Aortic Aneurysm Patients

Abdominal aortic aneurysm (AAA) rupture is a local event in the aneurysm wall that naturally demands tools to assess the risk for local wall rupture. Consequently, global parameters like the maximum diameter and its expansion over time can only give very rough risk indications; therefore, they frequently fail to predict individual risk for AAA rupture. In contrast, the Biomechanical Rupture Risk Assessment (BRRA) method investigates the wall's risk for local rupture by quantitatively integrating many known AAA rupture risk factors like female sex, large relative expansion, intraluminal thrombus-related wall weakening, and high blood pressure. The BRRA method is almost 20 years old and has progressed considerably in recent years, it can now potentially enrich the diameter indication for AAA repair. The present paper reviews the current state of the BRRA method by summarizing its key underlying concepts (i.e., geometry modeling, biomechanical simulation, and result interpretation). Specifically, the validity of the underlying model assumptions is critically disused in relation to the intended simulation objective (i.e., a clinical AAA rupture risk assessment). Next, reported clinical BRRA validation studies are summarized, and their clinical relevance is reviewed. The BRRA method is a generic, biomechanics-based approach that provides several interfaces to incorporate information from different research disciplines. As an example, the final section of this review suggests integrating growth aspects to (potentially) further improve BRRA sensitivity and specificity. Despite the fact that no prospective validation studies are reported, a significant and still growing body of validation evidence suggests integrating the BRRA method into the clinical decision-making process (i.e., enriching diameter-based decision-making in AAA patient treatment).

Fibrinolytic PLGA nanoparticles for slow clot lysis within abdominal aortic aneurysms attenuate proteolytic loss of vascular elastic matrix

Abdominal aortic aneurysms (AAAs) involve chronic overexpression of proteases in the aortic wall that result in disruption of elastic fibers and consequent loss of vessel elasticity. Nearly 75% of AAAs contain flow-obstructing, fibrin-rich intraluminal thrombi (ILT), which act as a) a bioinert shield, protecting the underlying AAA wall from high hemodynamic stresses, and b) a reservoir of inflammatory cells and proteases that cause matrix breakdown. For these reasons, restoring flow through the aorta lumen and facilitating transmural diffusion of therapeutics from circulation to the AAA wall must be achieved by slow thrombolysis of the ILT to render it porous without rapid breakdown. Intravenously dosed tissue plasminogen activator (tPA) has been shown to rapidly lyse ILTs in acute stroke and myocardial infarctions. For future use in opening up AAA segments, in this study, we investigated the ability of tPA released from poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) to slowly lyse fibrin clots without inducing proteolytic injury and matrix synthesis-inhibitory effects on cultured rat aneurysmal smooth muscle cells (EaRASMCs). Fibrin clot lysis time was greatly extended over that in presence of exogenous tPA. Surface functionalization of NPs with a cationic amphiphile allowed them to bind to anionic fibrin clot, release tPA at a slower rate and to lyse the clot as a front proceeding outwards in unlike the more rapid and homogenous lysis that occurred due to anionic PLGA NPs. Elastic matrix content was decreased in EaRASMC cultures exposed to byproducts of clot lysis with exogenous tPA, but not tPA-NPs, and was likely due to increased proteolytic activity (MMPs, plasmin) in EaRASMC cultures exposed to exogenous tPA-lysed clots. Our results suggest that gradual ILT lysis via slow release of tPA from NPs will be likely beneficial over exogenous tPA delivery in preserving elastic matrix content and attenuating matrilysis in the adjoining AAA wall, in vivo, while rendering the ILT porous to facilitate transmural delivery of endoluminally delivered AAA therapeutics.

The influence of intraluminal thrombus on noninvasive abdominal aortic aneurysm wall distensibility measurement

Abdominal aortic aneurysm wall distensibility can be estimated by measuring pulse pressure and the corresponding sac volume change, which can be obtained by measuring wall displacement. This approach, however, may introduce error if the role of thrombus in assisting the wall in bearing the pulse pressure loading is neglected. Our aim was to introduce a methodology for evaluating and potentially correcting this error in estimating distensibility. Electrocardiogram-gated computed tomography images of eleven patients were obtained, and the volume change between diastole and systole was measured. Using finite element procedures, we determined the equivalent pulse pressure loading that should be applied to the wall of a model where thrombus was digitally removed, to yield the same sac volumetric increase caused by applying the luminal pulse pressure to the model with thrombus. The equivalent instead of the measured pulse pressure was used in the distensibility expression. For a relative volumetric thrombus deposition (V ILT) of 50 %, a 62 % distensibility underestimation resulted when thrombus role was neglected. A strong linear correlation was observed between distensibility underestimation and V ILT. To assess the potential value of noninvasive wall distensibility measurement in rupture risk stratification, the role of thrombus on wall loading should be further investigated.

Review: the role of biomechanical modeling in the rupture risk assessment for abdominal aortic aneurysms

AAA disease is a serious condition and a multidisciplinary approach including biomechanics is needed to better understand and more effectively treat this disease. A rupture risk assessment is central to the management of AAA patients, and biomechanical simulation is a powerful tool to assist clinical decisions. Central to such a simulation approach is a need for robust and physiologically relevant models. Vascular tissue senses and responds actively to changes in its mechanical environment, a crucial tissue property that might also improve the biomechanical AAA rupture risk assessment. Specifically, constitutive modeling should not only focus on the (passive) interaction of structural components within the vascular wall, but also how cells dynamically maintain such a structure. In this article, after specifying the objectives of an AAA rupture risk assessment, the histology and mechanical properties of AAA tissue, with emphasis on the wall, are reviewed. Then a histomechanical constitutive description of the AAA wall is introduced that specifically accounts for collagen turnover. A test case simulation clearly emphasizes the need for constitutive descriptions that remodels with respect to the mechanical loading state. Finally, remarks regarding modeling of realistic clinical problems and possible future trends conclude the article.

Biomechanical factors in the biology of aortic wall and aortic valve diseases

The biomechanical factors that result from the haemodynamic load on the cardiovascular system are a common denominator of several vascular pathologies. Thickening and calcification of the aortic valve will lead to reduced opening and the development of left ventricular outflow obstruction, referred to as aortic valve stenosis. The most common pathology of the aorta is the formation of an aneurysm, morphologically defined as a progressive dilatation of a vessel segment by more than 50% of its normal diameter. The aortic valve is exposed to both haemodynamic forces and structural leaflet deformation as it opens and closes with each heartbeat to assure unidirectional flow from the left ventricle to the aorta. The arterial pressure is translated into tension-dominated mechanical wall stress in the aorta. In addition, stress and strain are related through the aortic stiffness. Furthermore, blood flow over the valvular and vascular endothelial layer induces wall shear stress. Several pathophysiological processes of aortic valve stenosis and aortic aneurysms, such as macromolecule transport, gene expression alterations, cell death pathways, calcification, inflammation, and neoangiogenesis directly depend on biomechanical factors.

Removing vascular obstructions: a challenge, yet an opportunity for interventional microdevices

Cardiovascular diseases are the leading cause of death worldwide; they are mainly due to vascular obstructions which, in turn, are mainly caused by thrombi and atherosclerotic plaques. Although a variety of removal strategies has been developed for the considered obstructions, none of them is free from limitations and conclusive. The present paper analyzes the physical mechanisms underlying state-of-art removal strategies and classifies them into chemical, mechanical, laser and hybrid (namely chemo-mechanical and mechano-chemical) approaches, while also reviewing corresponding commercial/research tools/devices and procedures. Furthermore, challenges and opportunities for interventional micro/nanodevices are highlighted. In this spirit, the present review should support engineers, researchers active in the micro/nanotechnology field, as well as medical doctors in the development of innovative biomedical solutions for treating vascular obstructions. Data were collected by using the ISI Web of Knowledge portal, buyer's guides and FDA databases; devices not reported on scientific publications, as well as commercial devices no more for sale were discarded. Nearly 70% of the references were published since 2006, 55% since 2008; these percentages respectively raise to 85% and 65% as regards the section specifically reviewing state-of-art removal tools/devices and procedures.

Impact of poroelasticity of intraluminal thrombus on wall stress of abdominal aortic aneurysms

Background

The predictions of stress fields in Abdominal Aortic Aneurysm (AAA) depend on constitutive descriptions of the aneurysm wall and the Intra-luminal Thrombus (ILT). ILT is a porous diluted structure (biphasic solid–fluid material) and its impact on AAA biomechanics is controversially discussed in the literature. Specifically, pressure measurements showed that the ILT cannot protect the wall from the arterial pressure, while other (numerical and experimental) studies showed that at the same time it reduces the stress in the wall.

Method

To explore this phenomenon further a poroelastic description of the ILT was integrated in Finite Element (FE) Models of the AAA. The AAA model was loaded by a pressure step and a cyclic pressure wave and their transition into wall tension was investigated. To this end ILT’s permeability was varied within a microstructurally motivated range.

Results

The two-phase model verified that the ILT transmits the entire mean arterial pressure to the wall while, at the same time, it significantly reduces the stress in the wall. The predicted mean stress in the AAA wall was insensitive to the permeability of the ILT and coincided with the results of AAA models using a single-phase ILT description.

Conclusion

At steady state, the biphasic ILT behaves like a single-phase material in an AAA model. Consequently, computational efficient FE single-phase models, as they have been exclusively used in the past, accurately predict the wall stress in AAA models.